Electrical model to predict current–voltage behaviours of lithium ferro phosphate batteries using a transient response correction method
Source abstract
Abstract
Abstract Lithium ferro phosphate (LiFePO 4 ) batteries are stable in terms of their thermal and chemical characteristics and have a high potential for wide use in the future. A battery model that predicts current–voltage ( I – V ) performance with high accuracy is vital for circuit designers so they can design circuits to control the usage of the battery and improve its runtime and its safety during use. In this paper, a battery model with two resistance–capacitance (RC) parallel networks is used for modelling and the values for parameters are divided into two sets; one for loaded conditions and the other for unloaded conditions. A methodology of transient response correction is proposed for formulating the parameters of the loaded condition. The steps for parameter extraction are discussed and the proposed battery model is validated using data from several experiments. The comparison between experiment and simulation results shows that the proposed model is capable of predicting I – V performance of the battery with very little error.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Urbain · IEEE Trans Energy Conversion · 2010 · 25 · 86210.1109/TEC.2010.2049652 ↗
2. C. Liao, Z. Tang, L. Wang, Proceedings of the 2010 Asia-Pacific Power and Energy Engineering Conference, 2010, pp. 1–4.10.1109/APPEEC.2010.5448558 ↗
3. Chen · IEEE Trans Energy Conversion · 2006 · 21 · 50410.1109/TEC.2006.874229 ↗
4. Zhang · IEEE Trans Energy Conversion · 2010 · 25 · 113310.1109/TEC.2010.2048904 ↗
5. Tsang · Energy Conversion and Management · 2010 · 51 · 285710.1016/j.enconman.2010.06.024 ↗
6. Kim · Journal of Power Sources · 2006 · 163 · 58410.1016/j.jpowsour.2006.09.006 ↗
7. W. Y. Low, J. A. Aziz, Proceedings of the 2011 Applied Power Electronics Colloquium, 2011, pp. 104–109.
8. Norian · Journal of Power Sources · 2011 · 196 · 236010.1016/j.jpowsour.2010.09.051 ↗
9. Gao · IEEE Trans Component and Packing Technologies · 2002 · 25 · 49510.1109/TCAPT.2002.803653 ↗
10. J. Kim, J. Shin, C. Jeon, B. Cho, Proceedings of the 26th Annual IEEE Applied Power Electronics Conference and Exposition, 2011, pp. 1984–1991.10.1109/APEC.2011.5744869 ↗
11. Lee · Journal of Power Sources · 2008 · 185 · 136710.1016/j.jpowsour.2008.08.103 ↗
12. Benger · World Electric Vehicle Journal · 2009 · 3 · 110.3390/wevj3020342 ↗
13. C. Liao, H. Li, L. Wang, Proceedings of the 2009 IEEE Vehicle Power and Propulsion Conference, 2009, pp. 1662–1665.10.1109/VPPC.2009.5289681 ↗
14. O. Erdinc, B. Vural, M. Uzunoglu, Proceedings of the 2009 International Conference on Clean Electrical Power, 2009, pp. 383–386.10.1109/ICCEP.2009.5212025 ↗
15. H. Zhang, M. Chow, IEEE Power and Energy Society General Meeting, Minneapolis, 2010, pp. 1–6.10.1109/PES.2011.6039422 ↗
16. Hu · Control Engineering Practice · 2009 · 17 · 119010.1016/j.conengprac.2009.05.002 ↗
17. Hu · Journal of Power Sources · 2011 · 196 · 44910.1016/j.jpowsour.2010.06.037 ↗
18. Hu · Journal of Power Sources · 2012 · 198 · 35910.1016/j.jpowsour.2011.10.013 ↗