journal article·2022-09Open access

Mass transport limitations in polymer electrolyte water electrolyzers using spatially-resolved current measurement

Frida H. Roenning, Anirban Roy, Douglas S. Aaron, Matthew M. Mench

Abstract

This work utilizes spatially-resolved current measurements to provide insight into mass transport limitations in electrolyzers that are not observable from traditional polarization measurement. In this study, two types of flow-fields (parallel and triple-serpentine) and two types of diffusion media (patterned porous thin titanium foil LGDLs and Ir-coated titanium felt PTLs) were examined. A non-uniform current distribution dominated by mass transport limitations was observed to be instigated by the restriction of liquid water transport to catalyst sites. Additionally, conditions are revealed which yield similar polarization performance but dissimilar current distributions. In such cases, the transport limitations for different architectures and porous media affect polarization in different regions of the active area. Furthermore, the triple-serpentine flow-field used in this study performs better than the parallel flow-field under mass transport limited operating conditions. This indicates that the parallel flow-field used in this study is more susceptible to starvation than the triple-serpentine flow-field for the electrolyzer studied.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Hybrid Renewable Energy Systems · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Pure hydrogen production by PEM electrolysis for hydrogen energy10.1016/j.ijhydene.2005.04.038 ↗
2. Mayyas · 2019
3. High efficiency PEM water electrolysis: enabled by advanced catalysts, membranes, and processes10.1016/j.coche.2021.100719 ↗
4. Analyzing the levelized cost of hydrogen in refueling stations with on-site hydrogen production via water electrolysis in the Italian scenario10.1016/j.ijhydene.2020.11.110 ↗
5. Mench · 2008
6. Polymer electrolyte water electrolysis: Correlating performance and porous transport layer structure: Part II. Electrochemical performance analysis10.1149/2.1241908jes ↗
7. Membrane degradation in PEM water electrolyzer: Numerical modeling and experimental evidence of the influence of temperature and current density10.1016/j.ijhydene.2014.11.111 ↗
8. Performance modeling and current mapping of proton exchange membrane electrolyzer cells with novel thin/tunable liquid/gas diffusion layers10.1016/j.electacta.2017.09.170 ↗
9. Wettability effects of thin titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells10.1016/j.electacta.2018.12.162 ↗
10. Communication—Neutron radiography of the water/gas distribution in the porous layers of an operating electrolyser10.1149/2.0641607jes ↗
11. In situ two-phase flow investigation of proton exchange membrane (PEM) electrolyzer by simultaneous optical and neutron imaging10.1149/1.3635568 ↗
12. Operando X-ray tomography and sub-second radiography for characterizing transport in polymer electrolyte membrane electrolyzer10.1016/j.electacta.2018.04.144 ↗
13. Measurement of contact angles at carbon fiber-water-air triple-phase boundaries inside gas diffusion layers using x-ray computed tomography10.1021/acsami.1c00849 ↗
14. Observation of preferential pathways for oxygen removal through porous transport layers of polymer electrolyte water electrolyzers10.1016/j.isci.2020.101783 ↗
15. Pore network modelling to enhance liquid water transport through porous transport layers for polymer electrolyte membrane electrolyzers10.1016/j.jpowsour.2019.226910 ↗
16. Two-dimensional multi-physics modeling of porous transport layer in polymer electrolyte membrane electrolyzer for water splitting10.1016/j.ijhydene.2020.09.148 ↗
17. A segmented cell approach for studying the effects of serpentine flow field parameters on PEMFC current distribution10.1016/j.electacta.2012.10.103 ↗
18. Further refinements in the segmented cell approach to diagnosing performance in polymer electrolyte fuel cells10.1016/S0378-7753(03)00533-0 ↗
19. In situ current distribution measurements in polymer electrolyte fuel cells10.1149/1.1584440 ↗
20. In-situ current distribution and mass transport analysis via strip cell architecture for a vanadium redox flow battery10.1016/j.jpowsour.2019.226920 ↗
21. In situ localized current distribution measurements in all-vanadium redox flow batteries10.1149/2.0241601jes ↗
22. Spatially-resolved current distribution measurements in polymer electrolyte water electrolyzers10.1149/MA2020-02382457mtgabs ↗
23. Quantifying lateral current spread while measuring performance using a segmented polymer electrolyte water electrolysis cell10.1149/MA2020-02382458mtgabs ↗
24. Experimental characterization of inhomogeneity in current density and temperature distribution along a single-channel PEM water electrolysis cell10.1016/j.electacta.2017.12.087 ↗
25. Local current density and electrochemical impedance measurements within 50 cm single-channel PEM electrolysis cell10.1149/2.0411816jes ↗
26. Operando current mapping on PEM water electrolysis cells. Influence of mechanical stress10.1016/j.ijhydene.2017.08.189 ↗
27. Current density distribution of electrolyzer flow fields: In situ current mapping and neutron radiography10.1021/acs.energyfuels.9b03814 ↗
28. Influence of the porous transport layer properties on the mass and charge transfer in a segmented PEM electrolyzer10.1016/j.ijhydene.2020.01.100 ↗
29. Insights into the rapid two-phase transport dynamics in different structured porous transport layers of water electrolyzers through high-speed visualization10.1016/j.jpowsour.2021.230641 ↗
30. All-in-one bipolar electrode: A new concept for compact and efficient water electrolyzers10.1016/j.nanoen.2021.106551 ↗
31. Tuning catalyst activation and utilization via controlled electrode patterning for low-loading and high-efficiency water electrolyzers
32. Morphology engineering of iridium electrodes via modifying titanium substrates with controllable pillar structures for highly efficient oxygen evolution reaction10.1016/j.electacta.2021.139797 ↗
33. Exploring the impacts of conditioning on proton exchange membrane electrolyzers by in situ visualization and electrochemistry characterization10.1021/acsami.1c21849 ↗
34. Discovery of true electrochemical reactions for ultrahigh catalyst mass activity in water splitting10.1126/sciadv.1600690 ↗
35. In-situ and in-operando analysis of voltage losses using sense wires for proton exchange membrane water electrolyzers10.1016/j.jpowsour.2020.229012 ↗
36. Mathematical modeling of novel porous transport layer architectures for proton exchange membrane electrolysis cells10.1016/j.ijhydene.2021.05.070 ↗
37. Experimental study on porous current collectors of PEM electrolyzers10.1016/j.ijhydene.2012.01.095 ↗
38. Two-phase flow behaviour and performance of polymer electrolyte membrane electrolysers: Electrochemical and optical characterisation10.1016/j.ijhydene.2018.07.003 ↗
39. Bear · 2013
40. 2022