Gravity-driven Poly(ethylene glycol)@Li1.5Al0.5Ge1.5(PO4)3 asymmetric solid polymer electrolytes for all-solid-state lithium batteries
Source abstract
Abstract
Abstract An asymmetric solid polymer electrolyte (ASPE) is designed as two-in-one layered structure driven by gravity and in-situ polymerization. The rigid layer composed of polymer embedded three-dimensional continuous Li1.5Al0.5Ge1.5(PO4)3 (LAGP) framework improves the Li+ transference number and critical current densities. The soft poly(ethylene glycol) (PEG) layer prepared via thermal polymerization by poly(ethylene glycol) methyl ether methacrylate (PEGMEM) makes good interfacial contact with cathodes. Driven by gravity, the two layers are automatically stratified during the polymerization. By virtue of this structural merit, the Li+ transference number of PEG@LAGP ASPE extends to 0.144 (vs. 0.083 of PEG SPE), and symmetric Li/PEG@LAGP ASPE/Li cells can stably cycle over 400 h at current density of 0.5 mA cm−2 under 60 °C. LiFePO4/PEG@LAGP ASPE/Li cell exhibits excellent electrochemical performance at 2.5 C (0.5 mA cm−2) under 60 °C, reaching to a maximum specific capacity of 130.8 mA h g−1 and a capacity retention of 87.2% after 1000 cycles. Furthermore, the cells operating at high rates or high temperatures also have been demonstrated. This work provides a promising electrolyte design strategy for all-solid-state batteries with superior interface compatibility and long cycle life.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Harnessing steric separation of freshly nucleated Li2S nanoparticles for bottom-up assembly of high-performance cathodes for lithium-sulfur and lithium-ion batteries10.1002/aenm.201400196 ↗
2. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
3. Pathways for practical high-energy long-cycling lithium metal batteries10.1038/s41560-019-0338-x ↗
4. Detection of subsurface structures underneath dendrites formed on cycled lithium metal electrodes10.1038/nmat3793 ↗
5. Safety-reinforced poly(propylene carbonate)-based all-solid-state polymer electrolyte for ambient-temperature solid polymer lithium batteries10.1002/aenm.201501082 ↗
6. Early lithium plating behavior in confined nanospace of 3D lithiophilic carbon matrix for stable solid-state lithium metal batteries10.1002/smll.201904216 ↗
7. The gap between long lifespan Li-S coin and pouch cells: the importance of lithium metal anode protection10.1016/j.ensm.2016.09.003 ↗
8. Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes10.1126/science.abg7217 ↗
9. A dynamic stability design strategy for lithium metal solid state batteries10.1038/s41586-021-03486-3 ↗
10. Performance of batteries for electric vehicles on short and longer term10.1016/j.jpowsour.2012.03.085 ↗
11. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
12. In situ generation of poly (vinylene carbonate) based solid electrolyte with interfacial stability for LiCoO2 lithium batteries10.1002/advs.201600377 ↗
13. The structure and mechanical-properties of sheets prepared from bacterial cellulose10.1007/BF01139032 ↗
14. Ionic conductivity enhancement of polymer electrolytes with ceramic nanowire fillers10.1021/acs.nanolett.5b00600 ↗
15. Flexible, scalable, and highly conductive garnet-polymer solid electrolyte templated by bacterial cellulose10.1002/aenm.201703474 ↗
16. In situ generation of a soft-tough asymmetric composite electrolyte for dendrite-free lithium metal batteries10.1039/D0TA11748J ↗
17. In-situ plasticized polymer electrolyte with double-network for flexible solid-state lithium-metal batteries10.1021/jacs.7b10864 ↗
18. Review on composite polymer electrolytes for lithium batteries10.1016/j.polymer.2006.05.069 ↗
19. Ionic conductivity enhancement of polymer electrolytes with ceramic nanowire fillers10.1038/nenergy.2017.35 ↗
20. The initiation of high current density switching in electrically conductive polymer composite materials10.1063/1.366937 ↗
21. Influence of phosphorus sources on lithium ion conducting performance in the system of Li2O-Al2O3-GeO2-P2O5 glass-ceramics10.1016/j.ssi.2014.12.013 ↗
22. Practical evaluation of energy densities for sulfide solid-state batteries10.1016/j.etran.2019.100010 ↗
23. Hydroxyapatite nanowire-reinforced poly(ethylene oxide)-based polymer solid electrolyte for application in high-temperature lithium batteries10.1021/acsami.0c15692 ↗
24. Flexible, solid-state, ion-conducting membrane with 3D garnet nanofiber networks for lithium batteries10.1073/pnas.1600422113 ↗
25. High conductivity polymer electrolyte with comb-like structure via a solvent-free UV-cured method for large-area ambient all-solid-state lithium batteries10.1016/j.jmat.2019.04.002 ↗
26. Lithium-salt-rich PEO/Li0.3La0.557TiO3 interpenetrating composite electrolyte with three-dimensional ceramic nano-backbone for all-solid-state lithium-ion batteries10.1021/acsami.8b06658 ↗
27. Room temperature elastic moduli and vickers hardness of hot-pressed LLZO cubic garnet10.1007/s10853-012-6687-5 ↗
28. 10 μm-thick high-strength solid polymer electrolytes with excellent interface compatibility for flexible all-solid-state lithium-metal batteries
29. Safety-reinforced poly(propylene carbonate)-based all-solid-state polymer electrolyte for ambient-temperature solid polymer lithium batteries10.1039/C6TA10066J ↗
30. Structure-composition-property relationships in polymeric amorphous calcium phosphate-based dental composites10.3390/ma2041929 ↗
31. Selectively wetted rigid-flexible coupling polymer electrolyte enabling superior stability and compatibility of high-voltage lithium metal batteries10.1002/aenm.201903939 ↗
32. Anion-immobilized polymer electrolyte achieved by cationic metal-organic framework filler for dendrite-free solid-state batteries10.1016/j.ensm.2019.01.007 ↗
33. Flexible and ion-conducting membrane electrolytes for solid-state lithium batteries: dispersion of garnet nanoparticles in insulating polyethylene oxide10.1016/j.nanoen.2016.09.002 ↗
34. Hydroxyapatite nanowire-reinforced poly(ethylene oxide)-based polymer solid electrolyte for application in high-temperature lithium batteries10.1021/acsami.0c15692 ↗
35. Bacterial cellulose composite solid polymer electrolyte with high tensile strength and lithium dendrite inhibition for long life battery10.1002/eem2.12122 ↗
36. Gel polymer electrolyte based on p(acrylonitrile-maleic anhydride) for lithium ion battery10.1016/j.electacta.2018.08.024 ↗
37. Pulse polarization for Li-ion battery under constant state of charge: part i. pulse discharge experiments10.1149/2.0551711jes ↗
38. Lithium ion conductive Li1.5Al0.5Ge1.5(PO4)3 based inorganic-organic composite separator with enhanced thermal stability and excellent electrochemical performances in 5 V lithium ion batteries10.1016/j.jpowsour.2014.09.105 ↗