journal article·2022-02

Mechanism study and evaluation of high efficiency paper-based microfluidic fuel cell coupled with capillary force

Tiancheng Ouyang, Jie Lu, Peihang Xu, Xiaoyi Hu, Jingxian Chen

Publisher page

Abstract

Abstract Under the dual pressure of energy consumption and environmental pollution, mankind hopes to develop clean and renewable alternative energy, and the rapid development of fuel cells meets people's demand for energy-efficient power systems. The emergence of portable micro energy systems represented by microfluidic fuel cells, such as paper-based microfluidic fuel cells, has greatly enriched the means of medical detection to better cope with the threat of disease transmission. In this work, the numerical simulation method is innovatively introduced to study the paper-based microfluidic fuel cells. Both transient and steady-state modes are employed to demonstrate the whole operation process of the paper-based microfluidic fuel cell. In addition, the different structural parameters, including electrode spacing, the distance between electrode and inlet, channel thickness, and electrode length, are also investigated their influence mechanisms on cell performance. Results show that the increase of most structural parameters decreases cell output power in different degrees. Even on the premise that increasing channel thickness has a positive impact on the output power, the fuel utilization still shows a downward trend. These conclusions provide theoretical support and reference for future optimization work and accelerate the development of microfluidic fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Electrochemical sensors and biosensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Potential impacts of vinasse biogas replacing fossil oil for power generation, natural gas, and increasing sugarcane energy in Brazil
2. Techno-economic assessment of advanced fuels and propulsion systems in future fossil-free ships10.1016/j.rser.2021.110861 ↗
3. The progress of fuel cell for malaysian residential consumption: energy status and prospects to introduction as a renewable power generation system10.1016/j.rser.2021.110984 ↗
4. Current progress and challenges in photoelectrode materials for the production of hydrogen10.1016/j.cej.2020.125415 ↗
5. Emergent green technologies for cost-effective valorization of microalgal biomass to renewable fuel products under a biorefinery scheme10.1016/j.cej.2021.128932 ↗
6. Degradation adaptive energy management strategy using fuel cell state-of-health for fuel economy improvement of hybrid electric vehicle10.1016/j.apenergy.2020.116413 ↗
7. A solid oxide fuel cell fuelled by methane recovered from groundwater10.1016/j.jclepro.2021.125877 ↗
8. Validation of robustness and fuel efficiency of a universal model-based energy management strategy for fuel cell hybrid trains: from analytical derivation via simulation to measurement on test bench10.1016/j.enconman.2020.113734 ↗
9. Haze to electricity: efficiently harvesting electric energy from air pollutants by construction of bioinspired electron transport chains in light- and heat-driven liquid flow fuel cells10.1016/j.cej.2021.129716 ↗
10. Fuel cell application in the automotive industry and future perspective
11. Results of a 200 hours lifetime test of a 7 kW Hybrid–Power fuel cell system on electric forklifts10.1016/j.energy.2020.118941 ↗
12. Horizontally structured microbial fuel cells in yarns and woven fabrics for wearable bioenergy harvesting10.1016/j.jpowsour.2020.229271 ↗
13. A review of online electrochemical diagnostic methods of on-board proton exchange membrane fuel cells10.1016/j.apenergy.2021.116481 ↗
14. Performance analysis of a turbofan engine integrated with solid oxide fuel cells based on Al-H2O hydrogen production for more electric long-endurance UAVs10.1016/j.enconman.2021.113999 ↗
15. Membraneless vanadium redox fuel cell using laminar flow10.1021/ja020812q ↗
16. Enhancing fuel transport in air-breathing microfluidic fuel cells by immersed fuel micro-jet10.1016/j.jpowsour.2019.227326 ↗
17. Current density distribution in air-breathing microfluidic fuel cells with an array of graphite rod anodes10.1016/j.ijhydene.2020.07.035 ↗
18. Discrete-holes film fueling anode heads for high performance air-breathing microfluidic fuel cell10.1016/j.jpowsour.2020.228966 ↗
19. Microfluidic fuel cells with different types of fuels: a prospective review10.1016/j.rser.2021.110806 ↗
20. Microfabricated paper-based vanadium co-laminar flow fuel cell10.1016/j.jpowsour.2020.227801 ↗
21. Flexible direct formate paper fuel cells with high performance and great durability10.1016/j.jpowsour.2021.229526 ↗
22. A self-pumping microfluidic fuel cell powered by formate with Pd coated carbon cloth electrodes10.1016/j.jpowsour.2021.229553 ↗
23. Microfluidic paper microbial fuel cell powered by Shewanella putrefaciens in IoT cloud framework10.1016/j.ijhydene.2020.04.294 ↗
24. A microfluidic galvanic cell on a single layer of paper10.1016/j.jpowsour.2016.03.109 ↗
25. Paper-based enzymatic microfluidic fuel cell: from a two-stream flow device to a single-stream lateral flow strip10.1016/j.jpowsour.2016.07.014 ↗
26. Improved performance of a paper-based glucose fuel cell by capillary induced flow10.1016/j.electacta.2018.05.074 ↗
27. Paper-based microfluidic biofuel cell operating under glucose concentrations within physiological range10.1016/j.bios.2016.09.062 ↗
28. A paper microfluidic fuel cell powered by urea10.1016/j.jpowsour.2018.06.082 ↗
29. Ethanol based fuel cell on paper support10.1016/j.jpowsour.2018.06.068 ↗
30. Towards best practices for improving paper-based microfluidic fuel cells10.1016/j.electacta.2018.12.077 ↗
31. Flexible H2O2 microfluidic fuel cell using graphene/Prussian blue catalyst for high performance10.1016/j.cej.2019.03.134 ↗
32. Paper-based membraneless hydrogen peroxide fuel cell prepared by micro-fabrication10.1016/j.jpowsour.2015.10.038 ↗
33. Microfluidic fuel cells on paper: meeting the power needs of next generation lateral flow devices10.1039/C3EE44044C ↗
34. Single-use paper-based hydrogen fuel cells for point-of-care diagnostic applications10.1016/j.jpowsour.2016.12.085 ↗
35. Towards autonomous lateral flow assays: paper-based microfluidic fuel cell inside an HIV-test using a blood sample as fuel10.1016/j.ijhydene.2017.07.079 ↗
36. A 3D paper-based enzymatic fuel cell for self-powered, low-cost glucose monitoring10.1016/j.bios.2015.12.020 ↗
37. Disposable self-support paper-based multi-anode microbial fuel cell (PMMFC) integrated with power management system (PMS) as the real time “shock” biosensor for wastewater10.1016/j.bios.2016.05.018 ↗
38. A screen-printed paper microbial fuel cell biosensor for detection of toxic compounds in water10.1016/j.bios.2017.11.018 ↗
39. A flexible paper-based hydrogen fuel cell for small power applications10.1016/j.ijhydene.2019.04.066 ↗
40. Modeling and performance analysis of branched microfluidic fuel cells with high utilization10.1016/j.electacta.2019.06.032 ↗
41. Two-phase computational modelling of a membraneless microfluidic fuel cell with a flow-through porous anode10.1016/j.jpowsour.2019.02.081 ↗
42. Pore-scale modeling of oxygen transport in the catalyst layer of air-breathing cathode in membraneless microfluidic fuel cells10.1016/j.apenergy.2020.115536 ↗
43. A novel two-phase model for predicting the bubble formation and performance in microfluidic fuel cells10.1016/j.jpowsour.2020.228018 ↗
44. Effects of force field and design parameters on the exergy efficiency and fuel utilization of microfluidic fuel cells10.1016/j.ijhydene.2020.02.172 ↗
45. A novel approach for modelling microfluidic fuel cell coupling vibration10.1016/j.jpowsour.2020.227728 ↗
46. A prospective study of anti-vibration mechanism of microfluidic fuel cell via novel two-phase flow model10.1016/j.energy.2020.119543 ↗
47. New insight on the mechanism of vibration effects in vapor-feed microfluidic fuel cell10.1016/j.energy.2021.120207 ↗
48. Enabling high-concentrated fuel operation of fuel cells with microfluidic principles: a feasibility study10.1016/j.apenergy.2013.01.077 ↗
49. Vanadium microfluidic fuel cell with novel multi-layer flow-through porous electrodes: model, simulations and experiments10.1016/j.apenergy.2016.05.072 ↗
50. Numerical and experimental comparative study of microfluidic fuel cells with different flow configurations: Co-flow vs. counter-flow cell10.1016/j.apenergy.2017.06.070 ↗
51. Numerical investigation and optimization of vapor-feed microfluidic fuel cells with high fuel utilization10.1016/j.electacta.2017.12.132 ↗
52. Prospects of membraneless mixed-reactant microfluidic fuel cells: evolution through numerical simulation10.1016/j.rser.2020.110045 ↗
53. Saturated imbibition under the influence of gravity and geometry10.1016/j.jcis.2018.03.050 ↗
54. Numerical simulation of liquid absorption in paper-like swelling porous media
55. Modeling of the capillary wicking of flax fibers by considering the effects of fiber swelling and liquid absorption10.1016/j.jcis.2018.04.064 ↗
56. Simulation on vertical wicking behaviors of liquid hydrogen within metallic weaves in terrestrial and microgravity environments10.1016/j.ijhydene.2019.12.007 ↗
57. Experimental and numerical studies on liquid wicking into filter papers for paper-based diagnostics10.1016/j.applthermaleng.2014.09.057 ↗
58. Investigation on cryo-wicking performance within metallic weaves under superheated conditions for screen channel liquid acquisition devices (LADs)10.1016/j.ijheatmasstransfer.2019.06.103 ↗
59. Darcy's law-based model for wicking in paper-like swelling porous media10.1002/aic.12163 ↗