journal article·2022-01

Defective ZnOx@porous carbon nanofiber network inducing dendrite-free zinc plating as zinc metal anode for high-performance aqueous rechargeable Zn/Na4Mn9O18 battery based on hybrid electrolyte

Yanli Song, Yanxu Chen, Zhifeng Wang, Weimin Zhao, Chunling Qin, Hui Yu, Xin Wang, Zhumabay Bakenov, Yongguang Zhang

Publisher page

Abstract

Abstract Aqueous rechargeable batteries (ARBs) have appealed extensive research interests due to its superiorities of high safety, environmental protection and low redox potential. A Zn/Na4Mn9O18 ARB with metal Zn as anode, Na4Mn9O18 (NMO) as cathode and Na+/Zn2+ hybrid-ion as electrolytes has been the focus of attention in recent years. Nevertheless, serious dendrite formation and side reactions impede the application of a Zn anode and the development of the ARBs. In this study, an independent self-supporting defective ZnOx dispersed porous carbon nanofibers (ZnOx@PCNF) is designed as the main body of zinc metal anode to solve this problem. It is revealed from ab initio molecular dynamics simulation (AIMD) that ZnO with oxygen defect can promote the surfacely uniform Zn deposition. In this situation, the ZnOx@PCNF/Zn||Zn symmetrical battery shows high reversibility and free of Zn dendrites. A full cell is assembled by selecting the NMO cathode and ZnOx@PCNF/Zn anode, and it remains a high reversible capacity of 44.5 mAh g−1 after 200 cycles at 4 C, showing one of the best electrochemical performance of ARBs by using Zn-NMO system. The research has important guiding significance for design and fabricate of defects-containing materials and has a positive impact on the exploitation of high performance ARBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Bimodal nanoporous NiO@Ni-Si network prepared by dealloying method for stable Li-ion storage10.1016/j.jpowsour.2019.227550 ↗
2. Improving the cycling stability of three-dimensional nanoporous Ge anode by embedding Ag nanoparticles for high-performance lithium-ion battery10.1016/j.jcis.2021.02.026 ↗
3. Si@Si3N4@C composite with egg-like structure as high-performance anode material for lithium ion batteries[J]10.1016/j.ensm.2019.06.031 ↗
4. Dual-network nanoporous NiFe2O4/NiO composites for high performance Li-ion battery anodes10.1016/j.cej.2020.124207 ↗
5. High specific surface area bimodal porous carbon derived from biomass reed flowers for high performance lithium-sulfur batteries10.1016/j.jcis.2020.02.062 ↗
6. Flexible integrated metallic glass-based sandwich electrodes for high-performance wearable all-solid-state supercapacitors10.1016/j.apmt.2019.100539 ↗
7. Sn modified nanoporous Ge for improved lithium storage performance10.1016/j.jcis.2021.06.046 ↗
8. Advanced rechargeable zinc-based batteries: recent progress and future perspectives[J]10.1016/j.nanoen.2019.05.059 ↗
9. Sodium ion stabilized vanadium oxide nanowire cathode for high-performance zinc-ion batteries[J]10.1002/aenm.201702463 ↗
10. Rechargeable aqueous zinc-manganese dioxide batteries with high energy and power densities[J]10.1038/s41467-017-00467-x ↗
11. Issues and future perspective on zinc metal anode for rechargeable aqueous zinc-ion batteries[J]10.1002/eem2.12067 ↗
12. Zinc-ion batteries: materials, mechanisms, and applications[J]10.1016/j.mser.2018.10.002 ↗
13. Na3V2(PO4)2F3-SWCNT: a high voltage cathode for non-aqueous and aqueous sodium-ion batteries[J]10.1039/C8TA09194C ↗
14. Electrolyte dependence of the performance of a Na2FeP2O7//NaTi2(PO4)3 rechargeable aqueous sodium-ion battery[J]10.1016/j.jpowsour.2016.07.052 ↗
15. Energetic aqueous rechargeable sodium-ion battery based on Na2CuFe(CN)6-NaTi2(PO4)3 intercalation chemistry[J]10.1002/cssc.201301036 ↗
16. The electrochemical performance of aqueous rechargeable battery of Zn/Na0.44MnO2 based on hybrid electrolyte[J]10.1016/j.jpowsour.2016.10.053 ↗
17. Diffusion behavior of sodium ions in Na0.44MnO2 in aqueous and non-aqueous electrolytes[J]10.1016/j.jpowsour.2013.02.090 ↗
18. Preparation of Na4Mn9O18/carbon nanotube/reduced graphene oxide by spray drying as cathode materials for sodium ion batteries[J]10.1016/j.solidstatesciences.2019.05.019 ↗
19. New-concept batteries based on aqueous Li+/Na+ mixed-ion electrolytes[J]10.1038/srep01946 ↗
20. A high-rate and stable quasi-solid-state zinc-ion battery with novel 2d layered zinc orthovanadate array[J]10.1002/adma.201803181 ↗
21. Coralloid carbon fiber-based composite lithium anode for robust lithium metal batteries[J]10.1016/j.joule.2018.02.001 ↗
22. An interface-bridged organic-inorganic layer that suppresses dendrite formation and side reactions for ultra-long-life aqueous zinc metal anodes[J]10.1002/anie.202005472 ↗
23. Flexible and free-standing Ti3C2Tx MXene@Zn paper for dendrite-free aqueous zinc metal batteries and nonaqueous lithium metal batteries[J]10.1021/acsnano.9b05599 ↗
24. Rechargeable aqueous zinc-ion batteries in MgSO4/ZnSO4 hybrid electrolytes[J]10.1007/s40820-020-0385-7 ↗
25. Fundamentals and perspectives of electrolyte additives for aqueous zinc-ion batteries[J]10.1016/j.ensm.2020.10.019 ↗
26. 3D porous copper skeleton supported zinc anode toward high capacity and long cycle life zinc ion batteries[J]10.1021/acssuschemeng.8b05568 ↗
27. Free-standing three-dimensional carbon nanotubes/amorphous MnO2 cathodes for aqueous zinc-ion batteries with superior rate performance[J]10.1016/j.mtener.2020.100548 ↗
28. Rechargeable nickel–3D zinc batteries: an energy-dense, safer alternative to lithium-ion[J]10.1126/science.aak9991 ↗
29. Three-dimensional hydrated vanadium pentoxide/MXene composite for high-rate zinc-ion batteries[J]10.1016/j.jcis.2021.02.090 ↗
30. Controlled synthesis of core-shell carbon@MoS2 nanotube sponges as high-performance battery electrodes[J]10.1002/adma.201603812 ↗
31. Functionalized carbon nanofiber interlayer towards dendrite-free, Zn-ion batteries[J]10.1016/j.cej.2021.131862 ↗
32. Biogenic mediated Ag/ZnO nanocomposites for photocatalytic and antibacterial activities towards disinfection of water[J]10.1016/j.jcis.2019.12.079 ↗
33. Electrochemical properties of an Na4Mn9O18-reduced graphene oxide composite synthesized via spray drying for an aqueous sodium-ion battery[J]10.3390/nano7090253 ↗
34. Facile synthesis of free-standing nanorod structured ZnO@carbon nanofiber film and its application in lithium-ion battery anode[J]10.1016/j.solidstatesciences.2020.106430 ↗
35. Diffusion behavior of sodium ions in Na0.44MnO2 in aqueous and non-aqueous electrolytes10.1016/j.jpowsour.2013.02.090 ↗
36. Na4Mn9O18/carbon nanotube composite as a high electrochemical performance material for aqueous sodium-ion batteries[J]10.1186/s11671-017-2340-1 ↗
37. High-rate performance electrospun Na0.44MnO2 nanofibers as cathode material for sodium-ion batteries[J]10.1016/j.jpowsour.2016.01.101 ↗
38. Heteroatom-doped 3D porous carbon architectures for highly stable aqueous zinc metal batteries and non-aqueous lithium metal batteries[J]10.1016/j.cej.2020.125843 ↗
39. Direct self-assembly of mxene on Zn anodes for dendrite-free aqueous zinc-ion batteries[J]10.1002/anie.202012322 ↗
40. Flexible and free-standing Ti3C2Tx MXene@Zn paper for dendrite-free aqueous zinc metal batteries and nonaqueous lithium metal batteries[J]10.1021/acsnano.9b05599 ↗