journal article·2022-01

A Zn ion hybrid capacitor with enhanced energy density for anode-free

Penggao Liu, Xiaowen Fan, Baixue Ouyang, Yanping Huang, Rui Hao, Shasha Gao, Weifang Liu, Kaiyu Liu

Publisher page

Abstract

Abstract Aqueous zinc-based energy storage system plays an increasingly important role in the energy storage field because of the low cost, high safety, and high capacity. At present, zinc-based cells developed use excessive zinc, which increases volume and mass and sacrifices some energy density. The anode-free construction is realized by effective interface modification layer to address these issues. Nitrogen doped porous carbon nanocages modulation layer facilitates the uniform distribution of electric field, promote the uniform transport of zinc ions, further optimize nucleation and inhibit dendrite growth. This strategy can realize the homogeneous zinc nucleation and growth to obtain efficient and stable zinc plating/stripping. The Cu/NPCNs electrodes keep stable Zn plating/stripping of 100 cycles at large current density of 5 mA cm−2 and still maintain high CE (99%). Based on this anode-free foundation, an anode-free Zn ion capacitor exhibits high specific capacity of 106 mAh g-1 at 1 mA cm−2 and maintains high-capacity stability of 98% after 2000 cycles at 1 mA cm−2. The energy density of 101 Wh kg−1 is higher than that of the zinc-metal anode system. This anode-free design strategy promotes the further development of zinc-based energy storage systems with high energy density.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Voltage issue of aqueous rechargeable metal-ion batteries10.1039/C9CS00131J ↗
2. Reversible epitaxial electrodeposition of metals in battery anodes10.1126/science.aax6873 ↗
3. Highly reversible zinc metal anode for aqueous batteries10.1038/s41563-018-0063-z ↗
4. Design principles for dendrite suppression with porous polymer/aqueous solution hybrid electrolyte for Zn metal anodes10.1021/acsenergylett.0c01235 ↗
5. Recent advances in rechargeable Zn-based batteries10.1016/j.jpowsour.2021.229677 ↗
6. A replacement reaction enabled interdigitated metal/solid electrolyte architecture for battery cycling at 20 mA cm–2 and 20 mAh cm–210.1021/jacs.0c11753 ↗
7. Improvement in self-discharge of Zn anode by applying surface modification for Zn–air batteries with high energy density10.1016/j.jpowsour.2012.11.046 ↗
8. Rechargeable alkaline zinc batteries: progress and challenges10.1016/j.ensm.2020.05.028 ↗
9. Controlling the shape change and dendritic growth in Zn negative electrodes for application in Zn/Ni batteries10.1016/j.jpowsour.2017.03.069 ↗
10. Zn-ion hybrid micro-supercapacitors with ultrahigh areal energy density and long-term durability10.1002/adma.201806005 ↗
11. Ultra-highly stable zinc metal anode via 3D-printed g-C3N4 modulating interface for long life energy storage systems10.1016/j.cej.2020.126425 ↗
12. Direct self-assembly of MXene on Zn anodes for dendrite-free aqueous zinc-ion batteries10.1002/anie.202012322 ↗
13. Long lifespan and high-rate Zn anode boosted by 3D porous structure and conducting network10.1016/j.jpowsour.2020.228808 ↗
14. Zeolitic imidazolate frameworks as Zn2+ modulation layers to enable dendrite-free Zn anodes10.1002/advs.202002173 ↗
15. Mesoporous hollow carbon spheres boosted, integrated high performance aqueous Zn-Ion energy storage10.1016/j.ensm.2019.09.004 ↗
16. Prototype system of rocking-chair Zn-ion battery adopting zinc chevrel phase anode and rhombohedral zinc hexacyanoferrate cathode10.3390/batteries5010003 ↗
17. An ultrastable presodiated titanium disulfide anode for aqueous “Rocking-Chair” zinc ion battery10.1002/aenm.201900993 ↗
18. Hexagonal MoO3 as a zinc intercalation anode towards zinc metal-free zinc-ion batteries10.1039/D0TA02236E ↗
19. An innovation: dendrite free quinone paired with ZnMn2O4 for zinc ion storage10.1016/j.mtener.2019.06.011 ↗
20. Building high rate capability and ultrastable dendrite-free organic anode for rechargeable squeous zinc batteries10.1002/advs.202000146 ↗
21. Multivalent ion storage towards high-performance aqueous zinc-ion hybrid supercapacitors10.1016/j.ensm.2018.10.020 ↗
22. Tian · Adv. Funct. Mater. · 2021 · 31 · 210188610.1002/adfm.202101886 ↗
23. High-voltage zinc-ion batteries: design strategies and challenges10.1002/adfm.202010213 ↗
24. Strategies for the stabilization of Zn metal anodes for Zn-ion batteries10.1002/aenm.202003065 ↗
25. Long cycle life and dendrite -freelithium morphology in anode -freelithium pouch cells enabled by a dual -saltliquid electrolyte10.1038/s41560-019-0428-9 ↗
26. Li-rich Li2[Ni0.8Co0.1Mn0.1]O2 for anode-free lithium metal batteries10.1002/anie.202017063 ↗
27. Anode-free rechargeable lithium metal batteries10.1002/adfm.201602353 ↗
28. Long-life and deeply rechargeable aqueous Zn anodes enabled by a multifunctional brightener-inspired interphase10.1039/C9EE00596J ↗
29. Hydrophobic organic-electrolyte-protected zinc anodes for aqueous zinc batteries10.1002/anie.202008634 ↗
30. Manipulating the ion-transfer kinetics and interface stability for high-performance zinc metal anodes10.1039/C9EE03545A ↗
31. An anode-free Zn-MnO2 Battery10.1021/acs.nanolett.0c04519 ↗
32. The three-dimensional dendrite-free zinc anode on a copper mesh with a zinc-oriented polyacrylamide electrolyte additive10.1002/anie.201907830 ↗
33. Toward planar and dendrite-free Zn electrodepositions by regulating Sn-crystal textured surface10.1002/adma.202008424 ↗
34. Reversible epitaxial electrodeposition of metals in battery anodes10.1126/science.aax6873 ↗
35. Computational screening of current collectors for enabling anode-free lithium metal batteries10.1021/acsenergylett.9b02306 ↗
36. Selective deposition and stable encapsulation of lithium through heterogeneous seeded growth10.1038/nenergy.2016.10 ↗
37. Designing dendrite-free zinc anodes for advanced aqueous zinc batteries10.1002/adfm.202001263 ↗
38. Toward practical high-areal-capacity aqueous zinc-metal batteries: quantifying hydrogen evolution and a solid-iIon conductor for stable zinc anodes10.1002/adma.202007406 ↗
39. A thin and uniform fluoride-based artificial interphase for the zinc metal anode enabling reversible Zn/MnO2 batteries10.1021/acsenergylett.1c01249 ↗
40. Mechanism for zincophilic sites on zinc-metal anode hosts in aqueous batteries10.1002/aenm.202003419 ↗
41. Recent progress and challenges of carbon materials for Zn-ion hybrid supercapacitors10.1002/cey2.69 ↗
42. Rational design of nitrogen doped hierarchical porous carbon for optimized zinc-ion hybrid supercapacitors10.1007/s12274-019-2521-6 ↗
43. Solution-free self-assembled growth of ordered tricopper phosphide for efficient and stable hybrid supercapacitor10.1016/j.ensm.2021.04.023 ↗
44. One-dimensional NiSe-Se hollow nanotubular architecture as a binder-free cathode with enhanced redox reactions for high-performance hybrid supercapacitors
45. Two-dimensional materials for high-energy solid-state asymmetric pseudocapacitors with high mass loadings10.1002/cssc.201902339 ↗