journal article·2021-10

Modeling of the overcharge behavior of lithium-ion battery cells protected by a voltage-switchable resistive polymer layer

A.A. Fedorova, D.V. Anishchenko, E.V. Beletskii, A. Yu. Kalnin, O.V. Levin

Publisher page

Abstract

Abstract Recently, a novel approach to overcharge protection of Li-ion batteries by voltage-switchable resistive polymer layer, placed between the cathode active mass and the current collector, was reported. The unique feature of the layer under consideration is the ability to increase the electrode resistance when the cathode potential exceeds operating limits, preventing cell overcharge and degradation. Here we extend the full-order Newman model of a lithium-ion battery cell by adding a description of the novel type of overcharge protection layer. The model was used to simulate Constant Current, Constant Voltage, and Constant Power charging modes as well as thermal effects and was implemented in Multiphysics (MP) software (COMSOL Inc., Palo Alto, CA). Comparison of electrochemical responses in the simulated modes demonstrated that the cell protected via the protective layer has advantages when operating at any mode. Therefore, the computational study proves the effectiveness of the usage of the protective layer with switchable resistance. Moreover, this model is a powerful tool for material design and engineering tasks in LIB development as it allows fast and simple estimation of resistance and other parameters’ values that meet a given safety standard.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Plett · 2015
2. Battery cell balancing: what to balance and how
3. Reconfigurable battery techniques and systems: a survey10.1109/ACCESS.2016.2545338 ↗
4. Safety of lithium-ion cells and batteries at different states-of-charge10.1149/1945-7111/abc8c4 ↗
5. Limitations of internal protective devices in high-voltage/high-capacity batteries using lithium-ion cylindrical commercial cells
6. A review of safety strategies of a Li-ion battery10.1016/j.jpowsour.2020.228649 ↗
7. Possible use of methylbenzenes as electrolyte additives for improving the overcharge tolerances of Li-ion batteries10.1007/s10800-004-0771-8 ↗
8. Influence of electrolyte additives on safety and cycle life of rechargeable lithium cells10.1023/A:1024039302020 ↗
9. Aromatic monomer gassing agents for protecting non-aqueous lithium batteries against overcharge
10. Battery separators10.1021/cr020738u ↗
11. Mussel-and diatom-inspired silica coating on separators yields improved power and safety in Li-ion batteries10.1021/cm301967f ↗
12. Enhancement of thermal stability and cycling performance in lithium-ion cells through the use of ceramic-coated separators10.1016/j.jpowsour.2009.11.020 ↗
13. Sustainable, heat-resistant and flame-retardant cellulose-based composite separator for high-performance lithium ion battery
14. All-integrated bifunctional separator for Li dendrite detection via novel solution synthesis of a thermostable polyimide separator10.1021/jacs.6b06324 ↗
15. Polyester separators for lithium‐ion cells: improving thermal stability and abuse tolerance10.1002/aenm.201200292 ↗
16. Overcharge protection for rechargeable lithium batteries using electroactive polymers10.1149/1.1633162 ↗
17. Modeling the behavior of electroactive polymers for overcharge protection of lithium batteries10.1149/1.1649232 ↗
18. Switchable resistance conducting-polymer layer for Li-ion battery overcharge protection10.1016/j.jpowsour.2021.229548 ↗
19. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
20. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
21. Discharge model for the lithium iron-phosphate electrode10.1149/1.1785012 ↗
22. Modeling side reactions in composite li y mn2 o 4 electrodes10.1149/1.1838376 ↗
23. Effect of temperature on performanceof LaNi4. 76Sn0. 24 metal hydride electrode’10.1023/A:1018460709968 ↗
24. Thermal and solid electrolyte interphase characterization of lithium-ion battery10.1016/j.energy.2019.03.007 ↗
25. Mathematical modeling of a lithium ion battery with thermal effects in COMSOL Inc. Multiphysics (MP) software10.1016/j.jpowsour.2011.03.017 ↗
26. Thermal‐electrochemical modeling of battery systems10.1149/1.1393625 ↗
27. Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles10.1016/j.jpowsour.2006.01.038 ↗
28. SAE J2464 “EV & HEV rechargeable energy storage system (RESS) safety and abuse testing procedure”10.4271/2010-01-1077 ↗
29. Computational modelling of thermal runaway propagation potential in lithium iron phosphate battery packs10.1016/j.egyr.2020.03.024 ↗
30. Analysis of the thermal behavior of a LiFePO4 battery cell
31. Polymeric nickel complexes with salen-type ligands for modification of supercapacitor electrodes: impedance studies of charge transfer and storage properties10.1016/j.electacta.2016.12.135 ↗
32. Failure mechanism of Li-ion battery at overcharge conditions10.1007/s10008-007-0449-3 ↗
33. Resistivity-temperature behavior of intrinsically conducting bis (3-methoxysalicylideniminato) nickel polymer10.3390/polym12122925 ↗
34. A review of international abuse testing standards and regulations for lithium ion batteries in electric and hybrid electric vehicles10.1016/j.rser.2017.05.195 ↗
35. Measured Data to Reproduce the Results of the Article "Modeling of the Overcharge Behavior of Lithium-Ion Battery Cells Protected by a Voltage-Switchable Resistive Polymer Layer". https://doi.org/10.17632/yg6jvvxpwm.1.