journal article·2021-09

Influence of sintering activators on electrical property of BaZr0.85Y0.15O3-δ proton-conducting electrolyte

Ho-Il Ji, Byung-Kook Kim, Ji-Won Son, Kyung Joong Yoon, Jong-Ho Lee

Publisher page

Abstract

Abstract In this study, the influence of CuO and ZnO sintering activators on the densification behavior, distribution of sintering activators, and electrical properties of Y-doped BaZrO3−δ proton conducting oxide were examined over a wide range of oxygen and water vapor partial pressures. With the use of 1 mol% CuO and 4 mol% ZnO, a relative density above 97% was achieved at sintering temperatures of 1500 °C and 1300 °C, respectively. The bulk and grain boundary conductivities of fully sintered BaZr0.85Y0.15O3−δ, Ba(Zr0.84Y0.15Cu0.01)O3−δ, and Ba(Zr0.81Y0.15Zn0.04)O3−δ were assessed using electrochemical impedance spectroscopy. The amount of sintering activators incorporated into the bulk was investigated using an energy dispersive spectrometer equipped with a high-resolution transmission electron microscope, whereas the equilibrium concentrations of proton and oxygen vacancies as a function of water vapor pressure were estimated by thermogravimetric analysis. Using these results, the total electrical conductivities of the three compositions at 800 °C over a wide range of oxygen and water vapor partial pressures were analyzed via a non-linear fitting based on the defect structure of Y-doped BaZrO3−δ. As a result, the proton, oxygen ion, and hole partial conductivities were calculated, and the proton transference numbers of the three compositions were compared.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Thermal Expansion and Ionic Conductivity · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Prospect of hydrogen technology using proton-conducting ceramics10.1016/j.ssi.2003.03.001 ↗
2. Highly efficient reversible protonic ceramic electrochemical cells for power generation and fuel production10.1038/s41560-019-0333-2 ↗
3. Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells10.1038/s41586-018-0082-6 ↗
4. Protonic ceramic electrochemical cells for hydrogen production and electricity generation: exceptional reversibility, stability, and demonstrated faradaic efficiency10.1039/C8EE02865F ↗
5. Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells10.1038/s41560-017-0085-9 ↗
6. A 5×5 cm2 protonic ceramic fuel cell with a power density of 1.3 W cm–2 at 600° C10.1038/s41560-018-0230-0 ↗
7. Mixed proton and electron conducting double perovskite anodes for stable and efficient tubular proton ceramic electrolysers10.1038/s41563-019-0388-2 ↗
8. Proton-conducting electrolytes for solid oxide fuel cell applications
9. Design and applications of potentiometric sensors based on proton-conducting ceramic materials10.1016/j.snb.2017.01.097 ↗
10. Enhanced sintering of yttrium‐doped barium zirconate by addition of ZnO10.1111/j.1551-2916.2005.00449.x ↗
11. Processing of yttrium-doped barium zirconate for high proton conductivity10.1557/jmr.2007.0163 ↗
12. Rahaman · 2003
13. Cost-effective solid-state reactive sintering method for high conductivity proton conducting yttrium-doped barium zirconium ceramics10.1016/j.ssi.2010.02.008 ↗
14. Solid-state reactive sintering mechanism for proton conducting ceramics10.1016/j.ssi.2013.09.025 ↗
15. Anomalous low-temperature proton conductivity enhancement in a novel protonic nanocomposite10.1039/C4CP00468J ↗
16. Transport properties and stability of cobalt doped proton conducting oxides10.1016/j.ssi.2008.12.013 ↗
17. Investigation of the structural and electrical properties of Co-doped BaCe0.9Gd0.1O3−δ10.1016/j.ssi.2010.11.008 ↗
18. Structural and electrochemical properties of yttrium-doped barium zirconate by addition of CuO10.1016/j.jallcom.2009.12.082 ↗
19. Degradation of hydration kinetics of proton-conducting Ba (Zr0.84Y0.15Cu0.01)O3−δ during conductivity-relaxation experiment10.1016/j.jpowsour.2016.09.129 ↗
20. Fabrication and characterization of Ba(Zr0.84Y0.15Cu0.01)O3−δ electrolyte-based protonic ceramic fuel cells10.1016/j.ceramint.2013.05.081 ↗
21. Effect of sintering atmosphere on phase stability, and electrical conductivity of proton-conducting Ba(Zr0.84Y0.15Cu0.01)O3−δ10.1016/j.ijhydene.2014.02.072 ↗
22. Low temperature sintering of BaZrO3-based proton conductors for intermediate temperature solid oxide fuel cells10.1016/j.ssi.2009.06.015 ↗
23. Effect of CuO on microstructure and conductivity of Y-doped BaCeO310.1016/j.ssi.2016.08.007 ↗
24. A stable, easily sintered proton‐conducting oxide electrolyte for moderate‐temperature fuel cells and electrolyzers10.1002/adma.200502098 ↗
25. A novel approach for substantially improving the sinterability of BaZr0.4Ce0.4Y0.2O3−δ electrolyte for fuel cells by impregnating the green membrane with zinc nitrate as a sintering aid10.1016/j.memsci.2013.03.002 ↗
26. Sintering behavior and conductivity study of yttrium‐doped BaCeO3–BaZrO3 solid solutions using ZnO additives10.1111/j.1551-2916.2009.03204.x ↗
27. Effects of ZnO addition methods on proton conductivities of barium zirconate modified by ytterbium10.1016/j.ssi.2012.07.005 ↗
28. Estimation of the protonic concentration and mobility in Ba (Zr0.81Yb0.15Zn0.04)O3−δ ceramic10.1016/j.ssi.2010.09.048 ↗
29. On the path-dependence of the open-cell voltage of a galvanic cell involving a ternary or multinary compound with multiple mobile ionic species under multiple chemical potential gradients10.1039/c0cp00977f ↗
30. Open-cell voltage and electrical conductivity of a protonic ceramic electrolyte under two chemical potential gradients10.1039/C8CP01880D ↗
31. Effect of NiO sintering-aid on hydration kinetics and defect-chemical parameters of BaZr0.8Y0.2O3−δ10.1016/j.ssi.2015.01.001 ↗
32. Proton conductive BaZr0.8‐xCexY0.2O3‐δ: influence of NiO sintering additive on crystal structure, hydration behavior, and conduction properties10.1002/cssc.202002369 ↗
33. Three dimensional representations of partial ionic and electronic conductivity based on defect structure analysis of BaZr0.85Y0.15O3−δ10.1016/j.ssi.2011.09.016 ↗
34. Low-temperature sintering of Ba (Zr, Y) O3-based proton conducting oxides using BaO–CuO eutectic flux as sintering aid10.1016/j.ceramint.2016.03.038 ↗
35. Influence of Y2O3 and CeO2 additions on growth of YBCO bulk superconductors10.1016/j.jcrysgro.2012.07.021 ↗
36. Thermal decomposition of Y123 powder and TSMG Y123 bulk superconductors in low oxygen atmosphere10.1016/j.phpro.2013.04.049 ↗
37. Chiang · 1997
38. Electrical conductivity of the high‐temperature proton conductor BaZr0.9Y0.1O2.9510.1111/j.1151-2916.2000.tb01272.x ↗
39. Effects of the fabrication process on the grain-boundary resistance in BaZr0.9Y0.1O3−δ10.1039/C4TA02848A ↗
40. Structural and electrochemical properties of dense yttria-doped barium zirconate prepared by solid-state reactive sintering10.3390/en11113083 ↗
41. Enhanced proton conductivity of yttrium-doped barium zirconate with sinterability in protonic ceramic fuel cells10.1016/j.jallcom.2015.03.168 ↗
42. Defect model of proton insertion into oxides10.1016/0167-2738(96)00230-5 ↗
43. Electrical conductivity relaxations and chemical diffusivities of BaCe0.95Yb0.05O2.975 upon hydration and oxidation10.1149/1.3005981 ↗
44. Technological challenges in the application of proton conducting ceramics10.1016/0167-2738(95)00051-7 ↗