Modification of aluminum current collectors with laser-scribed graphene for enhancing the performance of lithium ion batteries
Source abstract
Abstract
Abstract In this study, the graphene-modified Al foils are prepared to assemble lithium ion batteries (LIBs) through a three-step approach comprising: (1) deposition of the polyamic acid (PAA) on the Al substrate; (2) curing the PAA to form the polyimide (PI)-coated Al foils; (3) converting the PI into porous graphene by CO2 laser irradiation. With integration of the PI derived graphene (PDG) in the LIBs, the inserted PDG layer can enhance the adhesion and interface resistance between the active layer and Al electrode. The LiNi0.5Mn1.5O4 (LNMO)//Li4Ti5O12 (LTO) full cells with PDG layer are also fabricated to evaluate the effect of the modified layer on the cell performance. Compared to the pristine Al electrode, the modified current collector can improve the rate performance and reduce the temperature rise during the charge/discharge process leading to better cycling stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Overview of energy storage in renewable energy systems10.1016/j.ijhydene.2016.06.243 ↗
2. A review on lithium-ion battery ageing mechanisms and estimations for automotive applications10.1016/j.jpowsour.2013.05.040 ↗
3. A review of lithium-ion battery state of charge estimation and management system in electric vehicle applications: challenges and recommendations10.1016/j.rser.2017.05.001 ↗
4. Lithium-Ion Battery Storage for the Grid—a review of stationary battery storage system design tailored for applications in modern power grids10.3390/en10122107 ↗
5. A novel dual-salts of LiTFSI and LiODFB in LiFePO4-based batteries for suppressing aluminum corrosion and improving cycling stability10.1016/j.jpowsour.2015.06.117 ↗
6. Improving the self-discharge behavior of sulfur-polypyrrole cathode material by LiNO3 electrolyte additive10.1007/s11581-014-1095-2 ↗
7. Investigation of different binding agents for nanocrystalline anatase TiO2 anodes and its application in a novel, green lithium-ion battery10.1016/j.jpowsour.2012.07.142 ↗
8. Carbon-coated porous aluminum foil anode for high-rate, long-term cycling stability, and high energy density dual-ion batteries10.1002/adma.201603735 ↗
9. Unveiling and amplifying the benefits of carbon-coated aluminum current collectors for sustainable LiNi0.5Mn1.5O4 cathodes10.1021/acsaem.9b01302 ↗
10. Modification of aluminum current collectors with a conductive polymer for application in lithium batteries10.1016/j.elecom.2019.03.009 ↗
11. Carbon-coated aluminum foil as current collector for improving the performance of lithium sulfur batteries10.20964/2017.04.20 ↗
12. High-temperature carbon-coated aluminum current collector for enhanced power performance of LiFePO4 electrode of Li-ion batteries10.1016/j.elecom.2010.01.028 ↗
13. The development of low cost LiFePO4-based high power lithium-ion batteries10.1016/j.jpowsour.2005.03.119 ↗
14. Novel method of current collector coating by multiwalled carbon nanotube Langmuir layer for enhanced power performance of LiMn2O4 electrode of Li-ion batteries10.1016/j.electacta.2016.11.058 ↗
15. Suppressing corrosion of aluminum foils via highly conductive graphene-like carbon coating in high-performance lithium-based batteries10.1021/acsami.9b06442 ↗
16. Effect of graphene modified Cu current collector on the performance of Li4Ti5O12 anode for lithium-ion batteries10.1021/acsami.6b10038 ↗
17. Vertical graphene nanosheets modified Al current collectors for high-performance sodium-ion batteries10.1007/s12274-020-2780-2 ↗
18. Few-layer graphene coated current collectors for safe and powerful lithium ion batteries10.1016/j.carbon.2019.07.032 ↗
19. Laser-induced porous graphene films from commercial polymers10.1038/ncomms6714 ↗
20. Laser-induced graphene10.1021/acs.accounts.8b00084 ↗
21. ZnO decorated laser-induced graphene produced by direct laser scribing10.1039/C8NA00391B ↗
22. Flexible and robust laser-induced graphene heaters photothermally scribed on bare polyimide substrates10.1016/j.carbon.2018.12.010 ↗
23. Studies of polyimidehopper interface and its improvement by a two-component primer
24. Microstructure effect on the electrochemical property of Li4Ti5O12 as an anode material for lithium-ion batteries10.1016/j.electacta.2008.05.002 ↗
25. Enhanced rate-capability and cycling-stability of 5 V SiO2- and polyimide-coated cation ordered LiNi0.5Mn1.5O4 lithium-ion battery positive electrodes10.1021/acs.jpcc.6b10743 ↗
26. Electrospun polyimide nanofiber-coated polyimide nonwoven fabric for hot gas filtration10.1177/0263617418807111 ↗
27. Carbon nanotube/polyimide bilayer thin films with high structural stability, optical transparency, and electric heating performance10.1039/C6RA03912J ↗
28. Porous polyimide membranes prepared by wet phase inversion for use in low dielectric applications10.3390/ijms14058698 ↗
29. Rapid formation of polyimide nanofiber membranes via hot-press treatment and their performance as Li-ion battery separators10.1039/C8RA01556B ↗
30. Linear and crosslinked polyimide aerogels: synthesis and characterization10.1016/j.jmrt.2019.02.016 ↗
31. Studying disorder in graphite-based systems by Raman spectroscopy10.1039/B613962K ↗
32. Inside cover: definitive insight into the graphite oxide reduction mechanism by deuterium labeling10.1002/cplu.201500360 ↗
33. 2D Raman band splitting in graphene: charge screening and lifting of the K-point Kohn anomaly10.1038/s41598-017-13769-3 ↗
34. Understanding the zero-strain lithium insertion scheme of Li[Li1/3Ti5/3]O4: structural changes at atomic scale clarified by Raman spectroscopy10.1021/jp412196v ↗
35. One-step argon/nitrogen binary plasma jet irradiation of Li4Ti5O12 for stable high-rate lithium ion battery anodes10.1016/j.jpowsour.2014.11.074 ↗
36. Enhanced Li+ ion transport in LiNi0.5Mn1.5O4 through control of site disorder10.1039/c2cp43007j ↗
37. van Bommela · 2009 · vol. 156 · A362
38. Coprecipitation synthesis of NixMn1-x(OH)2 mixed hydroxides10.1021/cm9018309 ↗
39. Measuring the coating adhesion strength of electrodes for lithium-ion batteries10.1016/j.ijadhadh.2015.03.002 ↗
40. Resistance reduction effect by SDX® in lithium-ion batteries10.1149/08010.0283ecst ↗
41. Studies of SDXTM on the boundary resistance between aluminum current collectors and cathode active material layers10.1149/05026.0153ecst ↗
42. The mechanism of decreasing resistance by SDX™ in lithium ion battery10.1149/07523.0017ecst ↗
43. Self-supported Li4Ti5O12 nanosheet arrays for lithium ion batteries with excellent rate capability and ultralong cycle life10.1039/c3ee42646g ↗
44. Unravelling the role of electrochemically active FePO4 coating by atomic layer deposition for increased high-voltage stability of LiNi0.5Mn1.5O4 Cathode material10.1002/advs.201500022 ↗
45. Effect of capacity matchup in the LiNi0.5Mn1.5O4/Li4Ti5O12 cells10.1016/j.jpowsour.2008.04.091 ↗
46. Lattice Mn3+ behaviors in Li4Ti5O12/LiNi0.5Mn1.5O4 full cells10.1149/2.097308jes ↗