journal article·2021-09

In-situ TEM observation of fast and stable reaction of lithium polysulfide infiltrated carbon composite and its application as a lithium sulfur battery electrode for improved cycle lifetime

Saisaban Fahad, Zhen Wei, Akihiro Kushima

Publisher page

Abstract

Abstract Lithium sulfur batteries (LSB) are attracting attention as a next generation energy storage device because of their high energy density, low cost, and environmental friendliness surpassing that of lithium ion batteries (LIBs). An in-situ transmission electron microscopy experiment performed in this work revealed a fast electrochemical reaction and minimum volume changes during lithiation and delithiation for lithium polysulfide infiltrated vat black particles. Based on this observation, we developed a simple and cost-effective method for the lithium polysulfide battery to achieve high performance by employing a nanostructured vat black/carbon cloth electrode that exhibits high electrical conductivity, good mechanical properties, and a high surface area. These benefits enabled a high sulfur loading mass, captured the lithium polysulfide intermediate reaction products, and avoided structural changes. As a result, high specific discharge capacity of 1300 mAhg−1 at 0.2 C, an outstanding rate performance (846 mAhg−1 at 2 C) and an areal capacity of up to 3.352 mAhcm−2 with a sulfur loading mass of 3.8 mg were achieved. Increasing the sulfur loading mass to 7 mg (areal capacity of up to 4.24 mAhcm−2) still resulted in a desirable discharge capacity of 928 mAhg−1. This work provides a promising path towards practical lithium sulfur batteries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
2. The path towards sustainable energy10.1038/nmat4834 ↗
3. Li-O2 and Li-S batteries with high energy storage10.1038/nmat3191 ↗
4. Nanostructured sulfur cathodes10.1039/c2cs35256g ↗
5. 3D interconnected porous carbon aerogels as sulfur immobilizers for sulfur impregnation for lithium-sulfur batteries with high rate capability and cycling stability10.1002/adfm.201303080 ↗
6. Design of structural and functional nanomaterials for lithium-sulfur batteries10.1016/j.nantod.2017.12.010 ↗
7. Suppressed polysulfide crossover in Li–S batteries through a high-flux graphene oxide membrane supported on a sulfur cathode10.1021/acsnano.6b03285 ↗
8. Challenges and prospects of lithium–sulfur batteries10.1021/ar300179v ↗
9. New approaches for high energy density lithium–sulfur battery cathodes10.1021/ar3001348 ↗
10. Lithium/sulfur cell discharge mechanism: an original approach for intermediate species identification10.1021/ac2032244 ↗
11. Advances in Li–S batteries10.1039/b925751a ↗
12. Carbon–sulfur composites for Li–S batteries: status and prospects10.1039/c3ta11045a ↗
13. In operando X-ray diffraction and transmission X-ray microscopy of lithium sulfur batteries10.1021/ja2121926 ↗
14. Porous hollow Carbon@Sulfur composites for high-power lithium–sulfur batteries10.1002/anie.201100637 ↗
15. Composite of sulfur impregnated in porous hollow carbon spheres as the cathode of Li-S batteries with high performance10.1007/s12274-012-0279-1 ↗
16. Sulfur-impregnated activated carbon fiber cloth as a binder-free cathode for rechargeable Li-S batteries10.1002/adma.201103274 ↗
17. Graphene-wrapped sulfur particles as a rechargeable lithium–sulfur battery cathode material with high capacity and cycling stability10.1021/nl200658a ↗
18. Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries10.1038/ncomms2327 ↗
19. Two-dimensional layered transition metal disulphides for effective encapsulation of high-capacity lithium sulphide cathodes10.1038/ncomms6017 ↗
20. A soft approach to encapsulate sulfur: polyaniline nanotubes for lithium-sulfur batteries with long cycle life10.1002/adma.201103392 ↗
21. A thin multifunctional coating on a separator improves the cyclability and safety of lithium sulfur batteries10.1039/C7SC01961K ↗
22. A two-dimensional porous carbon-modified separator for high-energy-density Li-S batteries10.1016/j.joule.2017.12.003 ↗
23. Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer10.1038/ncomms2163 ↗
24. Conductive graphene oxide-polyacrylic acid (GOPAA) binder for lithium-sulfur battery10.1016/j.nanoen.2016.12.002 ↗
25. Acacia Senegal–inspired bifunctional binder for longevity of lithium–sulfur batteries10.1002/aenm.201500878 ↗
26. Solid-state lithium–sulfur batteries operated at 37 °C with composites of nanostructured Li 7 La 3 Zr 2 O 12/carbon foam and polymer10.1021/acs.nanolett.7b00221 ↗
27. Interconnected hollow carbon nanospheres for stable lithium metal anodes10.1038/nnano.2014.152 ↗
28. Review on high-loading and high-energy lithium–sulfur batteries10.1002/aenm.201700260 ↗
29. Research progress toward the practical applications of lithium–sulfur batteries10.1021/acsami.7b06208 ↗
30. Lithium–sulfur cells: the gap between the state-of-the-art and the requirements for high energy battery cells10.1002/aenm.201401986 ↗
31. Structural design of cathodes for Li-S batteries10.1002/aenm.201500124 ↗
32. Highly reversible lithium/dissolved polysulfide batteries with carbon nanotube electrodes10.1002/anie.201301250 ↗
33. A high energy lithium-sulfur battery with ultrahigh-loading lithium polysulfide cathode and its failure mechanism10.1002/aenm.201502459 ↗
34. Revisiting the positive roles of liquid polysulfides in alkali metal–sulfur electrochemistry: from electrolyte additives to active catholyte10.1039/C9NR07416C ↗
35. Long-life Li/polysulphide batteries with high sulphur loading enabled by lightweight three-dimensional nitrogen/sulphur-codoped graphene sponge10.1038/ncomms8760 ↗
36. Pie-like electrode design for high-energy density lithium–sulfur batteries10.1038/ncomms9850 ↗
37. Three-dimensional carbon nanotubes forest/carbon cloth as an efficient electrode for lithium–polysulfide batteries10.1021/acsami.6b14687 ↗
38. Enhanced cyclability of Li/polysulfide batteries by a polymer-modified carbon paper current collector10.1021/acsami.5b06214 ↗
39. Mitigation of shuttle effect in Li–S battery using a self-assembled ultrathin molybdenum disulfide interlayer10.1021/acsami.8b19354 ↗
40. Electrocatalytic polysulfide traps for controlling redox shuttle process of Li–S batteries10.1021/jacs.5b04472 ↗
41. Surface-activated graphite paper for high-performance lithium-polysulfide batteries10.1021/acssuschemeng.8b03193 ↗
42. Free-standing nitrogen-doped graphene paper as electrodes for high-performance lithium/dissolved polysulfide batteries10.1002/cssc.201402329 ↗
43. Toward high energy organic cathodes for Li-ion batteries: a case study of vat dye/graphene composites10.1002/adfm.201603603 ↗
44. Housing sulfur in polymer composite frameworks for Li–S batteries10.1007/s40820-019-0249-1 ↗
45. Enhanced Li–S batteries using amine-functionalized carbon nanotubes in the cathode10.1021/acsnano.5b06373 ↗
46. In situ observation of the electrochemical lithiation of a single SnO2 nanowire electrode10.1126/science.1195628 ↗
47. Liu, X. H.; Liu, Y.; Kushima, A.; Zhang, S.; Zhu, T.; Li, J.; Huang, J. Y. In Situ TEM Experiments of Electrochemical Lithiation and Delithiation of Individual Nanostructures. Adv. Energy Mater. https://doi.org/10.1002/aenm.201200024.10.1002/aenm.201200024 ↗
48. In situ TEM observation of electrochemical lithiation of sulfur confined within inner cylindrical pores of carbon nanotubes10.1002/aenm.201501306 ↗
49. Phase separation of Li2S/S at nanoscale during electrochemical lithiation of the solid-state lithium–sulfur battery using in situ TEM10.1002/aenm.201600806 ↗
50. In situ TEM study of volume expansion in porous carbon nanofiber/sulfur cathodes with exceptional high-rate performance10.1002/aenm.201602078 ↗
51. Sulfur speciation in Li–S batteries determined by operando X-ray absorption spectroscopy10.1021/jz401763d ↗
52. In situ TEM observations of discharging/charging of solid-state lithium-sulfur batteries at high temperatures10.1002/smll.202001899 ↗
53. Toward practical high-energy batteries: a modular-assembled oval-like carbon microstructure for thick sulfur electrodes10.1002/adma.201700598 ↗