A proton conducting solid oxide fuel cell---implementation of the reduced order model in available software and verification based on experimental data
Source abstract
Abstract
Abstract The article provides an overview of knowledge on how to model fuel cells using software which is oriented to system modeling. The overview covers several types of fuel cell such as SOFC, MCFC and PEMFC. Fuel cells were modeled using mainly three types of software, i.e. Aspen Hysys, Aspen Plus and Matlab. Based on our literature review, we decided to use Aspen Hysys to create a proton conducting SOFC model. Model construction is based on a reduced order approach that we published earlier. We used available experimental data to verify the model we created on. The results generated by the model and the experimental data were then subjected to an error analysis. Only two of all the articles found contained a set of information that was fit for the purpose of validating the model. The model maps the work of the proton conducting SOFC with high accuracy, i.e., an error of 0.01 V.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Economics of innovative high capacity-to-power energy storage technologies pointing at 100% renewable micro-grids10.1016/j.est.2020.101198 ↗
2. Characterization of Sr2Fe1.5Mo0.5O6-δ -Gd0.1Ce0.9O1.95 symmetrical electrode for reversible solid oxide cells10.1016/j.ceramint.2019.02.179 ↗
3. Characterization of a circular 80 mm anode supported solid oxide fuel cell (AS-SOFC) with anode support produced using high-pressure injection molding (HPIM)10.1016/j.ijhydene.2018.02.143 ↗
4. Fabrication and structural properties of LaNb 1‐x as x O 4 ceramics
5. Health state prediction and analysis of SOFC system based on the data driven entire stage experiment10.1016/j.apenergy.2019.04.053 ↗
6. Advanced control system for grid-connected SOFC hybrid plants: experimental verification in cyber-physical mode10.1115/1.4044196 ↗
7. Coupling effect of operating parameters on performance of a biogas-fueled solid oxide fuel cell/gas turbine hybrid system10.1016/j.apenergy.2019.113675 ↗
8. Parameter extraction of fuel cells using hybrid interior search algorithm10.1002/er.4424 ↗
9. Effect of cell length on performance and transport phenomena in solid oxide fuel cells10.20964/2019.06.66 ↗
10. Maximizing SOFC performance through optimal parameters identification by modern optimization algorithms10.1016/j.renene.2019.01.072 ↗
11. Benchmarking of chemical flowsheeting software in fuel cell applications10.1016/S0378-7753(00)00632-7 ↗
12. Computer simulation of a biomass gasification-solid oxide fuel cell power system using Aspen Plus10.1016/j.energy.2010.04.051 ↗
13. Simulation of a tubular solid oxide fuel cell stack operating on biomass syngas using aspen Plus10.1149/1.3407524 ↗
14. An adaptable steady state aspen hysys model for the methane fuelled solid oxide fuel cell10.1016/j.cherd.2013.07.025 ↗
15. Modeling elementary heterogeneous chemistry and electrochemistry in solid-oxide fuel cells10.1149/1.2116607 ↗
16. Introducing, evaluation and exergetic performance assessment of a novel hybrid system composed of MCFC, methanol synthesis process, and a combined power cycle10.1016/j.enconman.2019.111878 ↗
17. Performance and efficiency analysis of an HT-PEMFC system with an absorption chiller for tri-generation applications10.3390/en12050905 ↗
18. Abbasi · 2019 · vol. 5
19. Modeling and techno-economic analysis of the heat pump-integrated PEMFC-based micro-CHP system10.1016/j.egypro.2018.09.063 ↗
20. Thermodynamic performance study of the integrated MR-SOFC-CCHP system10.1016/j.energy.2018.02.105 ↗
21. Thermodynamic performance study of the MR SOFC-HAT-CCHP system10.1016/j.ijhydene.2018.12.129 ↗
22. Performance assessment of a hybrid SOFC/MGT cogeneration power plant fed by syngas from a biomass down-draft gasifier10.1016/j.apenergy.2017.08.077 ↗
23. Tri-generation system based on municipal waste gasification, fuel cell and an absorption chiller10.13044/j.sdewes.d5.0172 ↗
24. Multi-objective optimization of sorption enhanced steam biomass gasification with solid oxide fuel cell10.1016/j.enconman.2018.12.047 ↗
25. Generation and selection of Pareto-optimal solution for the sorption enhanced steam biomass gasification system with solid oxide fuel cell10.1016/j.enconman.2019.06.033 ↗
26. Combined ammonia recovery and solid oxide fuel cell use at wastewater treatment plants for energy and greenhouse gas emission improvements10.1016/j.apenergy.2019.02.029 ↗
27. Process development and exergy analysis of a novel hybrid fuel cell-absorption refrigeration system utilizing nanofluid as the absorbent liquid10.1016/j.ijrefrig.2018.09.011 ↗
28. Aspen Plus model of an alkaline electrolysis system for hydrogen production10.1016/j.ijhydene.2019.12.027 ↗
29. Matlab/simulink based-study on PEM fuel cell and battery hybrid system
30. Interface design and software development for PEM fuel cell modeling based on Matlab/Simulink environment. 2009 WRI World Congr
31. Matlab/simulink based-study on PEM fuel cell and nonlinear control
32. MATLAB-based simulator of a 5 kW fuel cell for power electronics design10.1016/j.ijhydene.2013.04.123 ↗
33. Grid connected fuel cell and PV hybrid power generating system design with Matlab Simulink10.1016/j.ijhydene.2013.12.029 ↗
34. PEM fuel cell model and simulation in Matlab–Simulink based on physical parameters10.1016/j.energy.2016.10.033 ↗
35. Optimization of flow channel design and operating parameters on proton exchange membrane fuel cell using MATLAB10.3311/PPch.8461 ↗
36. Modelling and simulation of Proton Exchange Membrane fuel cell with serpentine bipolar plate using MATLAB10.1016/j.ijhydene.2017.06.091 ↗
37. Dynamic modelling of a direct internal reforming solid oxide fuel cell stack based on single cell experiments10.1016/j.apenergy.2019.05.053 ↗
38. Parameter identification of solid oxide fuel cell by Chaotic Binary Shark Smell Optimization method10.1016/j.energy.2019.07.100 ↗
39. Singh · 2015 · vol. 127 · 743
40. An inverse-problem approach: estimating multi-physiochemical properties of porous electrodes of single cell of a hydrogen-fueled solid oxide fuel cell by applying the pattern-search optimization to a pseudo-2D numerical model10.1016/j.jpowsour.2019.227437 ↗
41. Extensive analysis of SOFC fed by direct syngas at different anodic compositions by using two numerical approaches10.1016/j.enconman.2020.112664 ↗
42. Constrained computationally efficient nonlinear predictive control of Solid Oxide Fuel Cell: tuning, feasibility and performance10.1016/j.isatra.2019.10.009 ↗
43. Operating limitation and degradation modeling of micro solid oxide fuel cell-combined heat and power system10.1016/j.apenergy.2019.113444 ↗
44. Recent advances in material and performance aspects of solid oxide fuel cells10.1016/j.jelechem.2019.113315 ↗
45. Chemical synthesis of materials based on calcium zirconate for solid oxide fuel cells (SOFC)10.1002/ep.13243 ↗
46. Preparation, characterization and intermediate-temperature electrochemical properties of Er3+-doped barium cerate–sulphate composite electrolyte10.3390/ma12172752 ↗
47. Corporation H. HYSYS.Plant 2.1 User Guide 1996.
48. Modeling and optimum design of hybrid solid oxide fuel cell-gas turbine power plants10.1016/j.ijhydene.2014.10.077 ↗
49. Dynamic numerical analysis of cross-, co-, and counter-current flow configuration of a 1 kw-class solid oxide fuel cell stack10.1016/j.ijhydene.2015.07.008 ↗
50. Manual H. Hyprotech. Ltd, Calgary, Canada 1998.
51. Conduction pathways and mixed ionic-electronic conductivity below 500 degrees C in CaxY3-xFe5O12-delta materials
52. Intermediate temperature anode-supported fuel cell based on BaCe0. 9Y0. 1O3 electrolyte with novel Pr2NiO4 cathode10.1002/fuce.200900033 ↗
53. Evaluation of SrSc0. 175Nb0. 025Co0. 8O3-$\delta$ perovskite as a cathode for proton-conducting solid oxide fuel cells: the possibility of in situ creating protonic conductivity and electrochemical performance10.1016/j.electacta.2017.11.037 ↗
54. Evaluation of {BaZr}0.1Ce0.7Y0.2O3-$\updelta$-based proton-conducting solid oxide fuel cells fabricated by a one-step co-firing process10.1016/j.electacta.2010.10.048 ↗