journal article·2021-02

Sensor based in-operando lithium-ion battery monitoring in dynamic service environment

Bing Li, Casey M. Jones, Thomas E. Adams, Vikas Tomar

Publisher page

Abstract

Abstract In this work, a dynamic testing platform to analyze lithium-ion battery (LIB) performance degradation and safety during in-service vibration and impacts is presented. The LIBs are cycled until end of life (EOL) under various dynamic conditions, providing in-operando battery performance examination. A sensor network constructed consisting of a resistance temperature detector (RTD), an accelerometer, an eddy current sensor and a shunt resistor is incorporated into the setup. Mechanisms of LIB capacity fade, temperature rise, and deformation from cycling in representative dynamic environments are analyzed and compared with results from theoretical analyses as well as with electrode structure evaluation. The sensor network identifies critical periods with high heat generation and stress accumulation rates. By comparing single cell and battery pack performances, complex effects of examined boundary conditions on LIB heat generation are analyzed. Using the sensor network, an approach to identify critical cell(s) with the highest risk of safety hazards without the need for electrochemical modeling is presented. Raman spectroscopy analyses, SEM imaging, and electrochemical impedance spectroscopy (EIS) analyses are also applied to support the observations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. Lessons learned from the 787 dreamliner issue on lithium-ion battery reliability10.3390/en6094682 ↗
2. Reliability and failure analysis of Lithium Ion batteries for electronic systems
3. Effects of vibrations and shocks on lithium-ion cells10.1016/j.jpowsour.2015.04.107 ↗
4. Dynamic impact of LiCoO2 electrodes for Li-ion battery aging evaluation10.1016/j.electacta.2018.08.101 ↗
5. Damage of cells and battery packs due to ground impact10.1016/j.jpowsour.2014.05.078 ↗
6. Europe · 2015
7. Doughty · 2005
8. Command · 2010
9. Reaction temperature sensing (RTS)-based control for Li-ion battery safety10.1038/srep18237 ↗
10. Lithium-ion Battery thermal Safety by early internal Detection, prediction and prevention
11. Investigation of response of LiCoO 2 cathode to dynamic impact using Raman imaging-based analyses10.1007/s11837-018-2941-x ↗
12. Vibration durability testing of nickel manganese cobalt oxide (NMC) lithium-ion 18,650 battery cells10.3390/en9010052 ↗
13. Characterising the in-vehicle vibration inputs to the high voltage battery of an electric vehicle10.1016/j.jpowsour.2013.06.150 ↗
14. Improved high-temperature performance of lithium-ion batteries through use of a thermally stable co-polyimide-based cathode binder10.1016/j.jpowsour.2013.12.015 ↗
15. SPH-4 helmet damage and head injury correlation
16. Optimal control of vehicle random vibration with constrained suspension deflection10.1006/jsvi.1996.0036 ↗
17. Experimental investigation of the lithium-ion battery impedance characteristic at various conditions and aging states and its influence on the application10.1016/j.apenergy.2012.09.030 ↗
18. Methods for state-of-charge determination and their applications10.1016/S0378-7753(01)00560-2 ↗
19. Effect of electrode porosity on the performance of natural Brazilian graphite electrodes10.1016/0378-7753(95)02268-6 ↗
20. Cell degradation in commercial LiFePO4 cells with high-power and high-energy designs10.1016/j.jpowsour.2014.02.052 ↗
21. Interface modifications by anion receptors for high energy lithium ion batteries10.1016/j.jpowsour.2013.10.071 ↗
22. Modeling Li-ion battery capacity depletion in a particle filtering framework
23. Analyses of the role of the second phase SiC particles in microstructure dependent fracture resistance variation of SiC-Si3N4 nanocomposites10.1088/0965-0393/16/3/035001 ↗
24. Dynamic impact tests on lithium-ion cells10.1016/j.ijimpeng.2017.04.025 ↗
25. Characterization and modeling of the mechanical properties of lithium-ion batteries10.3390/en10111730 ↗
26. Fracture of electrodes in lithium-ion batteries caused by fast charging10.1063/1.3492617 ↗
27. Deterministic and stochastic analyses of fracture processes in a brittle microstructure system10.1016/j.engfracmech.2004.06.006 ↗
28. Analyses of the role of grain boundaries in mesoscale dynamic fracture resistance of SiC–Si3N4 intergranular nanocomposites10.1016/j.engfracmech.2008.04.020 ↗
29. Analysis of the heat generation of lithium-ion battery during charging and discharging considering different influencing factors10.1007/s10973-013-3599-9 ↗
30. State-of-health monitoring of 18650 4S packs with a single-point impedance diagnostic10.1016/j.jpowsour.2014.05.033 ↗
31. Temperature rise in prismatic polymer lithium-ion batteries: an analytic approach10.4271/2012-01-0334 ↗
32. Heat dissipation design for lithium-ion batteries10.1016/S0378-7753(02)00048-4 ↗
33. Determination of the optimum heat transfer coefficient and temperature rise analysis for a lithium-ion battery under the conditions of Harbin city bus driving cycles10.3390/en10111723 ↗
34. Capacity fade analysis of a lithium ion cell10.1016/j.jpowsour.2008.01.028 ↗
35. A general energy balance for battery systems10.1149/1.2113792 ↗
36. A forced gas cooling circle packaging with liquid cooling plate for the thermal management of Li-ion batteries under space environment10.1016/j.applthermaleng.2017.05.159 ↗
37. Thermal modeling of cylindrical lithium ion battery during discharge cycle10.1016/j.enconman.2011.04.013 ↗
38. A comparative study of commercial lithium ion battery cycle life in electrical vehicle: aging mechanism identification10.1016/j.jpowsour.2013.11.029 ↗
39. Thermal parameters determination of battery cells by local heat flux measurements10.1016/j.jpowsour.2014.07.117 ↗
40. Methodology to determine the heat capacity of lithium-ion cells10.1016/j.jpowsour.2018.05.084 ↗
41. Coupled thermal–electrochemical modelling of uneven heat generation in lithium-ion battery packs10.1016/j.jpowsour.2013.05.164 ↗
42. An alternative cooling system to enhance the safety of Li-ion battery packs10.1016/j.jpowsour.2009.06.074 ↗
43. Experimental investigation on thermal management of cylindrical Li-ion battery pack based on vapor chamber combined with fin structure10.1016/j.applthermaleng.2019.114272 ↗
44. Thermal management of lithium-ion battery pack with liquid cooling
45. Temperature distribution optimization of an air-cooling lithium-ion battery pack in electric vehicles based on the response surface method10.1115/1.4042922 ↗
46. Modeling, validation and analysis of mechanical stress generation and dimension changes of a pouch type high power Li-ion battery10.1016/j.jpowsour.2012.09.096 ↗
47. Insight into the gassing problem of Li-ion battery10.3389/fenrg.2014.00059 ↗
48. One-pot synthesis of dimethyl carbonate from carbon dioxide, cyclohexene oxide, and methanol10.1007/s11164-013-1514-4 ↗
49. Study of the charging process of a LiCoO2-based Li-ion battery10.1016/j.jpowsour.2006.02.087 ↗
50. A high precision study of the Coulombic efficiency of Li-ion batteries10.1149/1.3487637 ↗
51. A new approach to surface properties of solid electrolyte interphase on a graphite negative electrode10.1016/j.jpowsour.2013.08.105 ↗
52. Impact of vibration on the surface film of lithium-ion cells10.3390/en10060741 ↗
53. Mechanical failure analysis of graphite anode particles with PVDF binders in Li-ion batteries10.1149/2.0111810jes ↗
54. Phase field modeling of lithium diffusion, finite deformation, stress evolution and crack propagation in lithium ion battery10.1016/j.eml.2016.03.008 ↗
55. Role of plastic deformation of binder on stress evolution during charging and discharging in lithium-ion battery negative electrodes10.1149/2.046308jes ↗
56. Investigation of the deformation mechanisms of lithium-ion battery components using in-situ micro tests10.1016/j.apenergy.2018.05.007 ↗
57. Volume changes of graphite anodes revisited: a combined operando X-ray diffraction and in situ pressure analysis study10.1021/acs.jpcc.8b01873 ↗
58. Compressive stress-strain characteristics of nuclear-grade graphite IG-11 effects of specimen size and strain rate10.3327/taesj.J07.014 ↗
59. Stress-strain relations for materials with different moduli in tension and compression10.2514/3.7297 ↗
60. Influence of interfacial interactions on deformation mechanism and interface viscosity in α-chitin–calcite interfaces10.1016/j.actbio.2015.06.034 ↗
61. An investigation into mechanical strength of exoskeleton of hydrothermal vent shrimp (Rimicaris exoculata) and shallow water shrimp (Pandalus platyceros) at elevated temperatures10.1016/j.msec.2015.01.003 ↗
62. Kim · 2009
63. On the stress characteristics of graphite anode in commercial pouch lithium-ion battery10.1016/j.jpowsour.2012.12.110 ↗
64. Raman spectroscopy of graphite10.1098/rsta.2004.1454 ↗
65. Development of a universal stress sensor for graphene and carbon fibres10.1038/ncomms1247 ↗
66. Raman modes and Grüneisen parameters of graphite under compressive biaxial stress10.1016/j.carbon.2012.05.046 ↗
67. In situ Raman study on electrochemical Li intercalation into graphite10.1149/1.2043869 ↗
68. In situ Raman study of lithium-ion intercalation into microcrystalline graphite10.1039/C4FD00079J ↗
69. Effect of uniaxial stress on the Raman spectra of graphite fibers10.1063/1.340975 ↗
70. Studying disorder in graphite-based systems by Raman spectroscopy10.1039/B613962K ↗
71. Surface structural disordering in graphite upon lithium intercalation/deintercalation10.1016/j.jpowsour.2009.12.034 ↗
72. Measuring Li+ inventory losses in LiCoO2/graphite cells using Raman microscopy10.1149/2.1111606jes ↗
73. Raman study of layered rock‐salt LiCoO2 and its electrochemical lithium deintercalation10.1002/(SICI)1097-4555(199708)28:8<613::AID-JRS138>3.0.CO;2-T ↗
74. Effect of pressure on the structural properties and Raman modes of LiCoO 210.1103/PhysRevB.72.224102 ↗
75. Baccouche · 2018
76. On information divergence measures and a unified typicality10.1109/TIT.2010.2080431 ↗
77. Decision table reduction based on conditional information entropy
78. Uncertainty relations for information entropy in wave mechanics10.1007/BF01608825 ↗
79. A variable fidelity model management framework for designing multiphase materials
80. Modeling and applications of electrochemical impedance spectroscopy (EIS) for lithium-ion batteries10.33961/jecst.2019.00528 ↗
81. Effects of nanoparticle geometry and size distribution on diffusion impedance of battery electrodes10.1149/2.023301jes ↗
82. Effect of vinyl acetate plus vinylene carbonate and vinyl ethylene carbonate plus biphenyl as electrolyte additives on the electrochemical performance of Li-ion batteries10.1016/j.electacta.2007.07.026 ↗
83. Electrochemical impedance spectroscopy analysis with a symmetric cell for LiCoO2 cathode degradation correlated with Co dissolution10.3934/matersci.2016.2.448 ↗
84. The Raman spectra of Co3O410.1088/0022-3719/21/7/007 ↗
85. Influence of the PVdF binder on the stability of LiCoO2 electrodes10.1016/j.elecom.2005.09.010 ↗