Strategic implementation of pulsed oxidation for mitigation of CO poisoning in polymer electrolyte fuel cells
Source abstract
Abstract
Abstract Hydrogen generated by reforming various hydrocarbons contains impurities such as carbon monoxide (CO) and carbon dioxide (CO2) in varying concentrations. These impurities are known to poison the platinum and platinum alloy catalysts used in polymer electrolyte fuel cells (PEFCs) even at elevated temperatures. Amongst other approaches, pulsed oxidation for CO conversion has been proposed to enable usage of impure hydrogen fuel in PEFC applications. The present work evaluates the pulsed oxidation technique experimentally for practical implementation under high CO contamination levels. The implementation and effects of key operating parameters such as pulse width, current, and threshold potential for activation are systematically analyzed in terms of CO mitigation effectiveness. These parameters determine the extent of CO stripping and consequently the performance and energy conversion efficiency of the PEFC. Implementation of pulsing at set threshold potential rather than at fixed time intervals is shown to improve performance recovery up to 95% of the baseline performance under pure hydrogen. Technical means of utilizing the electrical energy generated during pulsing are discussed and measured, indicating a boost in the overall energy efficiency of the cell. Extended duration testing shows the feasibility of this technique to sustain CO poisoning in PEFCs at practical current densities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Hydrogen production from renewable and sustainable energy resources: promising green energy carrier for clean development10.1016/j.rser.2015.12.112 ↗
2. From hydrocarbon to hydrogen-carbon to hydrogen economy10.1016/j.ijhydene.2004.03.033 ↗
3. Mitigation of chemical membrane degradation in fuel cells: understanding the effect of cell voltage and iron ion redox cycle10.1002/cssc.201402957 ↗
4. Membrane degradation during combined chemical and mechanical accelerated stress testing of polymer electrolyte fuel cells10.1016/j.jpowsour.2014.01.106 ↗
5. Accelerated membrane durability testing of heavy duty fuel cells10.1149/2.0671501jes ↗
6. Life cycle assessment of processes for hydrogen production. Environmental feasibility and reduction of greenhouse gases emissions10.1016/j.ijhydene.2008.11.053 ↗
7. Poisoning of proton exchange membrane fuel cells by contaminants and impurities: review of mechanisms, effects, and mitigation strategies10.1016/j.jpowsour.2019.03.097 ↗
8. Effect of carbon monoxide on polymer electrolyte fuel cell performance with a hydrogen circulation system10.1149/1945-7111/ab732c ↗
9. Adsorption behavior of low concentration carbon monoxide on polymer electrolyte fuel cell anodes for automotive applications10.1016/j.jpowsour.2016.03.104 ↗
10. Effect of fuel utilization on the carbon monoxide poisoning dynamics of PEMFC10.1016/j.jpowsour.2014.02.016 ↗
11. Performance data of a proton exchange membrane fuel cell using H2/CO as fuel gas10.1149/1.1837305 ↗
12. Zhang · 2004 · 1
13. Sustained potential oscillations in proton exchange membrane fuel cells with PtRu as anode catalyst10.1149/1.1511752 ↗
14. Modeling the spatial and temporal distribution of current in a carbon monoxide poisoned polymer electrolyte fuel cell using a dynamic pseudo 1-D approach10.1149/2.0191907jes ↗
15. Investigation of the CO tolerance mechanism at several Pt-based bimetallic anode electrocatalysts in a PEM fuel cell10.1016/j.electacta.2008.07.003 ↗
16. Electrocatalysis of CO tolerance by carbon-supported PtMo electrocatalysts in PEMFCs10.1149/1.1759363 ↗
17. Preparation and electrochemical activities of Pt-Ti alloy PEFC electrocatalysts10.1149/1.2756369 ↗
18. A transient PEMFC model with CO poisoning and mitigation by O2 bleeding and Ru-containing catalyst10.1016/j.jpowsour.2007.01.020 ↗
19. Experimental evaluation of CO poisoning on the performance of a high temperature proton exchange membrane fuel cell10.1016/j.jpowsour.2009.04.021 ↗
20. Modeling of CO influence in PBI electrolyte pem fuel cells
21. Design and experimental characterization of a high-temperature proton exchange membrane fuel cell stack10.1115/1.4003753 ↗
22. The effect of internal air bleed on CO poisoning in a proton exchange membrane fuel cell10.1016/j.jpowsour.2009.02.058 ↗
23. Comprehensive study of an air bleeding technique on the performance of a proton-exchange membrane fuel cell subjected to CO poisoning10.1016/j.jpowsour.2013.05.042 ↗
24. Effects of nitrogen and carbon monoxide concentrations on performance of proton exchange membrane fuel cells with Pt-Ru anodic catalyst10.1016/j.jpowsour.2013.06.003 ↗
25. Ru-decorated Pt surfaces as model fuel cell electrocatalysts for CO electrooxidation10.1021/jp052277x ↗
26. H2 and H2/CO oxidation mechanism on Pt/C, Ru/C and Pt-Ru/C electrocatalysts10.1023/A:1017595920726 ↗
27. Enhanced CO-tolerance of carbon-supported platinum and molybdenum oxide anode catalyst10.1149/1.1598211 ↗
28. Investigation of PtNi/C as methanol tolerant electrocatalyst for the oxygen reduction reaction10.1016/j.jelechem.2015.12.044 ↗
29. Investigation of carbon supported PtW catalysts as CO tolerant anodes at high temperature in proton exchange membrane fuel cell10.1016/j.jpowsour.2016.06.043 ↗
30. The effect of temperature and pressure on the performance of a PEMFC exposed to transient CO concentrations10.1149/1.1522383 ↗
31. Enhancing the CO tolerance of PEMFC MEAs by combining sputter-deposited and direct-printed composite anode catalyst layers10.1016/j.ijhydene.2007.05.013 ↗
32. A new approach to the problem of carbon monoxide poisoning in fuel cells operating at low temperatures10.1149/1.2095401 ↗
33. Gottesfeld · 1990
34. Improvement of CO tolerance of proton exchange membrane (PEM) fuel cells by a pulsing technique10.1039/b005843m ↗
35. Enhancement of the performance and reliability of CO poisoned PEM fuel cells10.1016/j.jpowsour.2004.12.049 ↗
36. Experimental and modelling studies of CO poisoning in PEM fuel cells10.1016/j.jpowsour.2007.07.006 ↗
37. Electrochemical separation of hydrogen from reformate using PEM fuel cell technology10.1016/j.jpowsour.2007.06.020 ↗
38. Effect of current pulsing and “self-oxidation” on the CO tolerance of a PEM fuel cell10.1016/j.jpowsour.2004.03.070 ↗
39. An advanced power converter topology to significantly improve the CO tolerance of the PEM fuel cell power systems
40. Barbir · 2013
41. PEM fuel cell open circuit voltage (OCV) in the temperature range of 23 °C to 120 °C10.1016/j.jpowsour.2006.09.026 ↗