journal article·2020-01Open access

Detailed electrochemical performance and microstructural characterization of nickel – Yttria stabilized zirconia cermet anodes infiltrated with nickel, gadolinium doped ceria, and nickel – Gadolinium doped ceria nanoparticles

Paul J. Gasper, Yanchen Lu, Alexey Y. Nikiforov, Soumendra N. Basu, Srikanth Gopalan, Uday B. Pal

Abstract

Abstract Infiltration of nickel nanoparticles into nickel – yttria-stabilized-zirconia (Ni-YSZ) cermet anodes improves anode performance by reducing the average nickel feature size of the electrode, thus increasing the density of triple phase boundaries (TPBs). However, the TPBs of nickel nanoparticles are not fully utilized because there is no conductive pathway between nanoparticles, and nickel nanoparticles suffer from rapid coarsening during operation. This work explores the infiltration of Gd0.1Ce0.9O2-δ (GDC) as a material for connecting and stabilizing infiltrated nickel nanoparticles. Anodes were infiltrated with Ni, GDC, and Ni-GDC to study their stability and electrochemical performance. Measurements show that the simultaneous infiltration of nickel and GDC results in a greater performance improvement than either nickel or GDC alone. From this result, it is speculated that GDC provides a conducting pathway between nickel nanoparticles, better utilizing their TPBs. Fitting of electrochemical impedance spectra with an equivalent circuit model is used to measure individual cell resistances, revealing that infiltration of GDC reduces the activation energy of the anodic charge transfer reaction from 1.29 eV to 0.74 eV. The Ni-GDC nanoparticles are also more durable than nickel nanoparticles, demonstrating microstructural stability after 120 h of constant current at 800 °C, while nickel alone shows extensive coarsening.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Advanced battery technologies research · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Nanoscale and nano-structured electrodes of solid oxide fuel cells by infiltration: advances and challenges10.1016/j.ijhydene.2011.09.067 ↗
2. Review Fabrication and modification of solid oxide fuel cell anodes via wet impregnation/infiltration technique10.1016/j.jpowsour.2013.03.025 ↗
3. Evolution of the electrochemical interface in high-temperature fuel cells and electrolysers10.1038/nenergy.2015.14 ↗
4. Tailoring SOFC electrode microstructures for improved performance10.1002/aenm.201800120 ↗
5. Enhanced coking tolerance of a MgO-modified Ni cermet anode for hydrocarbon fueled solid oxide fuel cells10.1039/C6TA08031F ↗
6. Carbon formation mechanism of C2H2 in Ni-based catalysts revealed by in situ electron microscopy and molecular dynamics simulations10.1021/acsomega.9b00958 ↗
7. Recent anode advances in solid oxide fuel cells10.1016/j.jpowsour.2007.06.086 ↗
8. Direct operation of methane fueled solid oxide fuel cells with Ni cermet anode via Sn modification10.1016/j.ijhydene.2016.04.252 ↗
9. Microstructural modeling and effective properties of infiltrated SOFC electrodes10.1149/05701.2527ecst ↗
10. Quantitative relationships between composition, particle size, triple phase boundary length and surface area in nickel-cermet anodes for Solid Oxide Fuel Cells10.1016/j.jpowsour.2010.08.006 ↗
11. Alternative Ni-impregnated mixed ionic-electronic conducting anode for SOFC operation at high fuel utilization10.1149/2.0071710jes ↗
12. Improved microstructure and performance of Ni-based anode for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2013.08.060 ↗
13. Optimization of infiltration techniques used to construct Ni/YSZ anodes10.1149/2.056405jes ↗
14. Stability of nickel-infiltrated anodes in intermediate temperature SOFCs10.1149/06801.1245ecst ↗
15. Grafting doped manganite into nickel anode enables efficient and durable energy conversions in biogas solid oxide fuel cells10.1016/j.apcatb.2016.07.001 ↗
16. Enhancing sulfur tolerance of Ni-based cermet anodes of solid oxide fuel cells by ytterbium-doped barium cerate infiltration10.1021/acsami.6b00925 ↗
17. In-situ nano-alloying Pd-Ni for economical control of syngas production from high-temperature thermo-electrochemical reduction of steam/CO210.1016/j.apcatb.2016.07.008 ↗
18. Anode-supported solid oxide fuel cells with ion conductor infiltration10.1002/er.1832 ↗
19. Enhancing sulfur tolerance of a Ni-YSZ anode through BaZr0.1Ce0.7Y0.1Yb0.1O3- infiltration10.1149/2.068405jes ↗
20. Improving intermediate temperature performance of Ni-YSZ cermet anodes for solid oxide fuel cells by liquid infiltration of nickel nanoparticles10.1016/j.jpowsour.2018.06.027 ↗
21. Effect of anodic current density on the spreading of infiltrated nickel nanoparticles in nickel-yttria stabilized zirconia cermet anodes10.1016/j.jpowsour.2018.11.002 ↗
22. Infiltration of SOFC stacks: evaluation of the electrochemical performance enhancement and the underlying changes in the microstructure
23. Reactivating the Ni-YSZ electrode in solid oxide cells and stacks by infiltration10.1016/j.jpowsour.2018.01.021 ↗
24. An effective property model for infiltrated electrodes in solid oxide fuel cells10.1149/2.036401jes ↗
25. Effect of fuel composition on performance of single-step cofired SOFCs10.1149/1.2769826 ↗
26. Modeling mass transfer in solid oxide fuel cell anode: I. Comparison between Fickian, Stefan-Maxwell and dusty-gas models10.1016/j.jpowsour.2016.01.099 ↗
27. Electronic conductivity measurement of Gd- and Sm-doped ceria ceramics by Hebb-Wagner method10.1016/j.ssi.2004.07.025 ↗
28. Lowering the temperature of solid oxide fuel cells10.1126/science.1204090 ↗
29. Advanced impedance modelling of Ni/8YSZ cermet anodes10.1016/j.electacta.2017.12.029 ↗
30. Comprehensive understanding of the active thickness in solid oxide fuel cell anodes using experimental, numerical and semi-analytical approach10.1016/j.jpowsour.2014.05.112 ↗
31. Investigations of mesoporous CeO2–Ru as a reforming catalyst layer for solid oxide fuel cells10.1016/j.elecom.2006.03.018 ↗
32. High electrochemical activity of the oxide phase in model ceria-Pt and ceria-Ni composite anodes10.1038/nmat3184 ↗
33. Nanostructured ceria-based materials: synthesis, properties, and applications10.1039/c2ee22310d ↗
34. Stability of Ni-yttria stabilized zirconia anodes based on Ni-impregnation10.1016/j.jpowsour.2010.05.047 ↗
35. Detailed impedance characterization of a well performing and durable Ni:CGO infiltrated cermet anode for metal-supported solid oxide fuel cells10.1016/j.jpowsour.2012.07.031 ↗
36. Development of planar metal supported SOFC with novel cermet anode10.1149/1.3205585 ↗
37. Characterization of Ni-infiltrated GDC electrodes for solid oxide cell applications10.1149/2.0501409jes ↗
38. A solid oxide fuel cell with a gadolinia-doped ceria anode: preparation and performance10.1016/S0167-2738(99)00111-3 ↗
39. Gadolinium doped ceria-impregnated nickel-yttria stabilised zirconia cathode for solid oxide electrolysis cell10.1016/j.ijhydene.2011.04.199 ↗
40. Performance of GDC-impregnated Ni anodes of SOFCs10.1149/1.1783112 ↗
41. Comprehensive quantification of Ni-Gd0.1Ce0.9O 1.95 anode functional layer microstructures by three-dimensional reconstruction using a FIB/SEM dual beam system10.1016/j.jpowsour.2012.11.117 ↗
42. Ni/YSZ patterned anode modelling study of surface reactions, diffusion, and spillover at a modelling study of surface reactions, diffusion, and spillover at a Ni/YSZ patterned anode10.1149/1.3095477 ↗
43. Model anodes and anode models for understanding the mechanism of hydrogen oxidation in solid oxide fuel cells10.1039/c0cp00541j ↗
44. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
45. Electrochemical analysis of reformate-fuelled anode supported SOFC10.1149/1.3597177 ↗
46. Combined deconvolution and CNLS fitting approach applied on the impedance response of technical Ni/8YSZ cermet electrodes10.1149/1.2908860 ↗
47. Metal-supported solid oxide electrolysis cell with significantly enhanced catalysis10.1002/ente.201801154 ↗
48. Gas diffusion impedance in characterization of solid oxide fuel cell anodes10.1149/1.1392015 ↗
49. Analysis and application of distribution of relaxation times in solid state ionics10.1016/j.ssi.2016.10.009 ↗
50. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
51. Yoon · 2008
52. Polarization measurements on single-step co-fired solid oxide fuel cells (SOFCs)10.1016/j.jpowsour.2007.03.003 ↗
53. A linear kronig-kramers transform test for immittance data validation10.1149/1.2044210 ↗
54. A method for improving the robustness of linear kramers-kronig validity tests10.1016/j.electacta.2014.01.034 ↗
55. Approximability of impedance spectra by RC elements and implications for impedance analysis10.1016/j.elecom.2015.05.018 ↗
56. Schönleber
57. Practical guidelines for reliable electrochemical characterization of solid oxide fuel cells10.1016/j.electacta.2016.12.148 ↗
58. Advanced impedance modeling of solid oxide electrochemical cells
59. More accurate macro-models of solid oxide fuel cells through electrochemical and microstructural parameter estimation - Part I: Experimentation10.1016/j.jpowsour.2015.06.118 ↗
60. More accurate macro-models of solid oxide fuel cells through electrochemical and microstructural parameter estimation - Part II: parameter estimation10.1016/j.jpowsour.2015.03.129 ↗
61. Ni/YSZ electrodes structures optimized for increased electrolysis performance and durability10.1016/j.ssi.2016.06.003 ↗
62. Impedance of SOFC electrodes: a review and a comprehensive case study on the impedance of LSM:YSZ cathodes10.1016/j.electacta.2013.10.053 ↗
63. Electrochemical responses of porous and rough electrodes
64. Impedance of solid oxide fuel cell LSM/YSZ composite cathodes10.1149/1.1360203 ↗
65. High-performance electrode for medium-temperature solid oxide fuel cells: control of microstructure of ceria-based anodes with highly dispersed ruthenium electrocatalysts10.1149/1.1391825 ↗
66. High performance electrode for medium-temperature solid oxide fuel cells: mixed conducting ceria-based anode with highly dispersed Ni electrocatalysts10.1149/1.1592371 ↗
67. Effect of precious-metal dopants on SOFC anodes for direct utilization of hydrocarbons10.1149/1.1613231 ↗
68. A strategy for achieving high performance with SOFC ceramic anodes10.1149/1.2432942 ↗
69. In situ study of activation and de-activation of LSM fuel cell cathodes – electrochemistry and surface analysis of thin-film electrodes10.1016/j.jcat.2012.07.010 ↗
70. Evidence for two activation mechanisms in LSM SOFC cathodes10.1149/1.3231500 ↗
71. Activation of LSM electrode related to the potential oscillation under cathodic polarization10.1149/1.3374407 ↗
72. Electrode activation of anode-supported SOFCs with LSM- or LSCF-type cathodes10.1016/j.ssi.2005.12.038 ↗
73. Carbon deposition and cell performance of Ni-YSZ anode support SOFC with methane fuel10.1016/S0167-2738(02)00243-6 ↗