The thermal effects of all porous solid oxide fuel cells
Source abstract
Abstract
Abstract All porous solid oxide fuel cells adopt a porous electrolyte to resist coking caused by hydrocarbon fuels such as methane. With O2 molecules coming from the cathode, chemical oxidation reactions occur at the anode, competing with the electrochemical oxidations with O2− ions. These reactions release a lot of heat, thus significantly affects the cell's power density and fuel efficiency. In this paper, we developed a 2D thermal-electrochemical model to study its thermal effects. After model validation, parametric studies are conducted to investigate the impact of operating condition and cell structure. Cell performance, including power density, coking resistance, peak cell temperature, heat source composition, and energy efficiency is analysed. Notably, the detailed heat-releasing processes at different operating conditions are discussed. A power density of 373 mW cm−2 is obtained when a CH4 and O2 concentration of 10% and an electrolyte thickness of 200 μm are adopted. This model can serve as a useful tool for the optimization of operating conditions and geometry design to improve the performance and coking resistance of solid oxide fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. The multiple effectiveness of state natural gas consumption constraint policies for achieving sustainable development targets in China10.1016/j.apenergy.2018.11.013 ↗
2. Double perovskites in catalysis, electrocatalysis, and photo(electro)catalysis10.1016/j.trechm.2019.05.006 ↗
3. Direct oxidation of hydrocarbons in a solid-oxide fuel cell10.1038/35005040 ↗
4. Solid oxide fuel cells10.1039/b105764m ↗
5. YSZ electrolyte support with novel symmetric structure by phase inversion process for solid oxide fuel cells10.1016/j.enconman.2018.09.051 ↗
6. Cobalt-free Ba0.5Sr0.5Fe0.8Cu0.1Ti0.1O3−δ as a bi-functional electrode material for solid oxide fuel cells10.1016/j.jpowsour.2015.08.064 ↗
7. A review of recent development: transport and performance modeling of PEM fuel cells10.1016/j.apenergy.2015.12.075 ↗
8. Modeling of an anode-supported Ni–YSZ|Ni–ScSZ|ScSZ|LSM–ScSZ multiple layers SOFC cell: Part I. Experiments, model development and validation10.1016/j.jpowsour.2007.04.037 ↗
9. Optimization and integration of hybrid renewable energy hydrogen fuel cell energy systems – a critical review10.1016/j.apenergy.2017.03.132 ↗
10. Advances in solid oxide fuel cell technology10.1016/S0167-2738(00)00452-5 ↗
11. Design and performance assessment of a combined heat, hydrogen and power (CHHP) system based on ammonia-fueled SOFC10.1016/j.apenergy.2018.09.138 ↗
12. Thermal modelling of ethanol-fuelled solid oxide fuel cells10.1016/j.apenergy.2019.01.025 ↗
13. Modeling of direct carbon solid oxide fuel cells with H2O and CO2 as gasification agents10.1016/j.ijhydene.2017.05.075 ↗
14. Solid oxide fuel cell operating with biomass derived producer gas: status and challenges10.1016/j.rser.2016.01.075 ↗
15. Comprehensive review of methane conversion in solid oxide fuel cells: prospects for efficient electricity generation from natural gas10.1016/j.pecs.2015.10.004 ↗
16. Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0.1Ce0.7Y0.2-xYbxO3-δ10.1126/science.1174811 ↗
17. An efficient carbon resistant composite Ni0.6Zn0.4O2-δ-GDC anode for biogas fuelled solid oxide fuel cell10.1016/j.jpowsour.2019.227042 ↗
18. On direct internal methane steam reforming kinetics in operating solid oxide fuel cells with nickel-ceria anodes10.1016/j.jpowsour.2017.09.082 ↗
19. An all porous solid oxide fuel cell (SOFC): a bridging technology between dual and single chamber SOFCs10.1039/c3ee40131f ↗
20. Coke-free operation of an all porous solid oxide fuel cell (AP-SOFC) used as an O2 supply device10.1039/C4TA05009F ↗
21. Direct methane fueled solid oxide fuel cell model with detailed reforming reactions10.1016/j.cej.2013.05.084 ↗
22. Modeling of all-porous solid oxide fuel cells with a focus on the electrolyte porosity design10.1016/j.apenergy.2018.10.069 ↗
23. Real-time optimization of an experimental solid-oxide fuel-cell system10.1016/j.jpowsour.2019.03.025 ↗
24. Thermo-electrochemical modeling of ammonia-fueled solid oxide fuel cells considering ammonia thermal decomposition in the anode10.1016/j.ijhydene.2010.11.100 ↗
25. Modeling of all porous solid oxide fuel cells10.1016/j.apenergy.2018.03.037 ↗
26. Performance improvement of a direct carbon solid oxide fuel cell system by combining with a Stirling cycle10.1016/j.energy.2017.09.036 ↗
27. Two-stage thermoelectric generators for waste heat recovery from solid oxide fuel cells10.1016/j.energy.2017.05.005 ↗
28. Energy, exergy and economic analysis of an integrated solid oxide fuel cell – gas turbine – organic Rankine power generation system10.1016/j.ijhydene.2016.01.146 ↗
29. Performance comparison of Fick's, dusty-gas and Stefan–Maxwell models to predict the concentration overpotential of a SOFC anode10.1016/S0378-7753(02)00724-3 ↗
30. A modified dusty gas model in the form of a Fick's model for the prediction of multicomponent mass transport in a solid oxide fuel cell anode10.1016/j.jpowsour.2012.01.107 ↗
31. NETL · 2004
32. Modeling of direct carbon solid oxide fuel cell for CO and electricity cogeneration10.1016/j.apenergy.2016.06.064 ↗
33. Experimental and simulation study on a catalyst packed tubular dense membrane reactor for partial oxidation of methane to syngas10.1016/S0009-2509(99)00542-4 ↗
34. Modeling of methane fed solid oxide fuel cells: comparison between proton conducting electrolyte and oxygen ion conducting electrolyte10.1016/j.jpowsour.2008.04.073 ↗
35. 2D thermal modeling of a solid oxide electrolyzer cell (SOEC) for syngas production by H2O/CO2 co-electrolysis10.1016/j.ijhydene.2012.01.072 ↗