journal article·2019-10Open access

Ex-situ experimental benchmarking of solid oxide fuel cell metal interconnects

Manuel Bianco, Johan Tallgren, Jong-Eun Hong, Shicai Yang, Olli Himanen, Jyrki Mikkola, Jan Van herle, Robert Steinberger-Wilckens

Abstract

Solid oxide fuel cells (SOFCs) can convert hydrocarbon fuels, such as methane, into heat and electricity with a high conversion efficiency. The fuel flexibility of the SOFC derives from the high operating temperature (600-900 °C). Such a high temperature stresses the materials used in the SOFC stacks, notably the metals constituting the interconnect (IC). Research centres developed in last twenty years specific alloys and coatings compositions. This led to a vast literature production of solutions to mitigate the degradation of the metals used in SOFC stacks. Unfortunately, the testing method and conditions change from one laboratory to another making the comparison of the results often impossible. This article compares systematically more than sixty different solutions to limit the degradation in the IC. The samples differed for the steel composition, the coating deposition technique, and the coating composition. A modified 4-probe technique and SEM/EDS post-test characterization measure the area specific resistance and chromium retention of the samples. Testing results indicate that i) deposition technique is the most relevant parameter, ii) in presence of coatings, the performances are independent of the type of ferritic stainless steel substrate iii) nitriding helps to limit the outward chromium diffusion in case of porous coatings.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Development, manufacturing and deployment of SOFC-based products at SOLIDpower10.1149/07801.0117ecst ↗
2. A. Mai, F. Fleischhauer, R. Denzler, J.G. Grolig, M. Dold, A. Schuler, HEXIS galileo 1000 N and HEXIS’ next generation SOFC system, in: XIII Eur. SOFC SOEC Forum, Lucerne, n.D.: pp. 5–12.
3. WORLD ENERGY COUNCIL · 2016
4. Recent development of SOFC metallic interconnect10.1016/S1005-0302(10)60049-7 ↗
5. Development of interconnect materials for solid oxide fuel cells10.1016/S0921-5093(02)00736-0 ↗
6. Long term oxidation behaviour and compatibility with contact materials of newly developed ferritic interconnector steel
7. Chromium poisoning of LaMnO3-based cathode within generalized approach10.1002/fuce.201200164 ↗
8. A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects10.1016/j.jpowsour.2009.09.069 ↗
9. Mitigation of chromium poisoning of cathodes in solid oxide fuel cells employing CuMn1.8O4 spinel coating on metallic interconnect10.1016/j.jpowsour.2017.11.069 ↗
10. Sintering of MnCo2O4 coatings prepared by electrophoretic deposition10.1016/j.matlet.2017.12.046 ↗
11. Preparation and performances of CuCo spinel coating on ferritic stainless steel for solid oxide fuel cell interconnect10.1016/j.ijhydene.2017.12.133 ↗
12. Sol-gel synthesis of Mn1.5Co1.5O4 spinel nano powders for coating applications10.1016/j.materresbull.2018.02.040 ↗
13. Communication—reactive sintering of a CoFe2O4 coating on ferritic stainless steels for SOFC interconnect application10.1149/2.0521805jes ↗
14. Effect of precursor materials on the performance of the NiFe2O4-based spinel layer for SOFC cathode-side contact application10.1016/j.ssi.2018.05.030 ↗
15. Co- and Ce/Co-coated ferritic stainless steel as interconnect material for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2017.01.045 ↗
16. Structure and electrical properties of Cu-doped Mn-Co-O spinel prepared via soft chemistry and its application in intermediate-temperature solid oxide fuel cell interconnects10.1016/j.jpowsour.2016.09.136 ↗
17. Improvements in oxidation resistance and conductivity of Fe-Cr metallic interconnector by (La0.8Ca0.2)(Cr0.9Co0.1)O3 coating10.1007/s12540-014-1005-1 ↗
18. Electrophoretically deposited LaNi0.6Fe0.4O3 perovskite coatings on metallic interconnects for solid oxide fuel cells10.1149/2.1171610jes ↗
19. Oxidation properties of the Crofer 22 APU steel coated with La0.6Sr0.4Co0.2Fe0.8O3 for IT-SOFC interconnect applications10.1007/s10973-013-3594-1 ↗
20. Oxidation of La–Sr–Mn-coated interconnector alloys for steam electrolysis under pressure in pure oxygen and in pure steam10.1007/s11085-017-9736-2 ↗
21. Composite Cu-LaFeO3 conversion coatings on a 18Cr ferritic stainless steel for IT-SOFC interconnects: effect of long-term air exposure at 700°C on Cr diffusion barrier and electrical properties10.1149/2.0101803jes ↗
22. Synthesis, processing and properties of calcium- and nickel-doped yttrium chromates(III) Y0.8Ca0.2Cr1−xNixO3 (x = 0-0.3) and studies on their potential application as coatings for SOFC interconnects10.1007/s11665-018-3422-7 ↗
23. Evaluation of pulse electroplated cobalt/yttrium oxide composite coating on the Crofer 22 APU stainless steel interconnect10.1016/j.ijhydene.2018.12.062 ↗
24. Low temperature processed MnCo2O4 and MnCo1.8Fe0.2O4 as effective protective coatings for solid oxide fuel cell interconnects at 750 °C10.1016/j.jpowsour.2016.11.011 ↗
25. Multilayered PVD coating for interconnector steel
26. K41 technical data sheet, ArcelorMittal, n.d. http://www.aperam.com/uploads/stainlesseurope/TechnicalDataSheet/FT_K41X_Eng.pdf (accessed November 15, 2017).
27. Comparison of different manganese-cobalt-iron spinel protective coating for SOFC interconnects
28. Evaluation of protective coatings for SOFC interconnects10.1149/06801.1597ecst ↗
29. Development of high strength ferritic steel for interconnect application in SOFCs10.1016/j.jpowsour.2007.12.028 ↗
30. The reactive element effect; ionic processes of grain-boundary segregation and diffusion in chromium oxide scales10.1088/0953-8984/1/28/001 ↗
31. A direct manufacturing cost model for solid‐oxide fuel cell stacks10.1002/fuce.201700012 ↗
32. 2014 · 43
33. Electrical conductivity of Cr2O3 doped with TiO210.1016/S0167-2738(98)00244-6 ↗
34. Assessment of thermal nitridation to protect metal bipolar plates in polymer electrolyte membrane fuel cells10.1149/1.1509561 ↗
35. Spinel and perovskite functional layers between plansee metallic interconnect (Cr‐5 wt % Fe‐1 wt % Y 2 O 3) and ceramic ( La0.85Sr0.15 ) 0.91MnO3 cathode materials for solid oxide fuel cells10.1149/1.1393891 ↗
36. Steinberger-Wilckens · 2016 · 41
37. Recent results in Jülich solid oxide fuel cell technology development10.1016/j.jpowsour.2013.04.110 ↗
38. Diffusion phenomena in atomic layer deposition10.1088/0268-1242/27/7/074001 ↗
39. Post-test characterization of metallic materials and adjacent components in an SOFC stack after 34,000 h operation at 700 °C10.1002/fuce.201800050 ↗
40. Influence of pre-reduction on microstructure homogeneity and electrical properties of APS Mn1.5Co1.5O4 coatings for SOFC interconnects10.1016/j.ijhydene.2017.09.073 ↗
41. Microstructural and electrical characterization of plasma sprayed Cu-Mn oxide spinels as coating on metallic interconnects for stacking solid oxide fuel cells10.1002/fuce.201400189 ↗
42. Influence of powder composition and manufacturing method on electrical and chromium barrier properties of atmospheric plasma sprayed spinel coatings prepared from MnCo2O4 and Mn2CoO4 + Co powders on Crofer 22 APU interconnectors10.1016/j.ijhydene.2014.08.016 ↗
43. Use of SOFC metallic interconnect coated with spinel protective layers using the APS technology10.1149/1.2729362 ↗
44. Deposition and evaluation of protective PVD coatings on ferritic stainless steel SOFC interconnects10.1149/1.2266244 ↗
45. Oxidation behavior of (Co,Mn)3O4 coatings on preoxidized stainless steel for solid oxide fuel cell interconnects10.1016/j.ijhydene.2011.09.028 ↗
46. Magnetron-sputtered cobalt-based protective coatings on ferritic steels for solid oxide fuel cell interconnect applications10.1016/j.corsci.2011.08.051 ↗
47. EB-PVD deposition of spinel coatings on metallic materials and silicon wafers10.1016/j.ijhydene.2014.07.115 ↗
48. Spinel coatings on metallic interconnects: effect of reduction heat treatment on performance10.1016/j.surfcoat.2014.05.049 ↗
49. Development of Cu1.3Mn1.7O4 spinel coating on ferritic stainless steel for solid oxide fuel cell interconnects10.1016/j.jpowsour.2014.10.017 ↗