journal article·2019-07Open access

Investigation on part-load performances of combined cooling and power system primed by solid oxide fuel cell with different bottoming cycles

X.J. Luo, K.F. Fong

Abstract

Abstract In hot-humid cities, conventional trigeneration can be reduced to combined cooling and power system. Solid oxide fuel cell is a high-temperature prime mover with high electrical efficiency, its efficiency may be further boosted up with bottoming cycle like gas turbine, Stirling engine and organic Rankine cycle. Besides using waste heat recovered from the prime mover to energize absorption chiller, the surplus electricity can be used to drive the conventional compression chiller as supplement. However, there is little knowledge about the effectiveness of such combined cooling and power system under different operating conditions. System models with various bottoming cycles are therefore developed, and their part-load performances are investigated. The effects of fuel inlet temperature and current density of fuel cell stack; compression ratio of gas turbine; Stirling engine type; working fluid of organic Rankine cycle; and fuel cell stack part-load ratio are explored. It is found that the combined cooling and power system with bottoming cycles of gas turbine and Stirling engine have higher boost of electrical efficiency. Gas turbine bottoming cycle is recommended when building energy demands are relatively constant, while Stirling engine bottoming cycle is suggested for variable energy demands.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Adsorption and Cooling Systems · Thermodynamic and Exergetic Analyses of Power and Cooling Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Achenbach · 1996
2. Braun · 2013 · 327
3. Simulation and exergy analysis of a hybrid solid oxide fuel cell (SOFC)–gas turbine system10.1016/j.energy.2006.03.006 ↗
4. Optimal integration strategies for a syngas fuelled SOFC and gas turbine hybrid10.1016/j.jpowsour.2011.07.044 ↗
5. Networked solid oxide fuel cell stacks combined with a gas turbine cycle10.1016/S0378-7753(01)01051-5 ↗
6. The hybrid solid oxide fuel cell (SOFC) and gas turbine (GT) systems steady state modeling10.1016/j.ijhydene.2012.03.005 ↗
7. Application oriented multiple-objective optimization, analysis and comparison of solid oxide fuel cell systems with different configurations10.1016/j.apenergy.2018.11.038 ↗
8. Energy analysis and techno-economic assessment of a co-gasification of woody biomass and animal manure, solid oxide fuel cells and micro gas turbine hybrid system10.1016/j.energy.2018.02.057 ↗
9. Multi-level modeling of SOFC–gas turbine hybrid system10.1016/S0360-3199(02)00160-X ↗
10. Part load operation of SOFC/GT hybrid systems: stationary analysis10.1016/j.ijhydene.2012.08.015 ↗
11. Modelling for part-load operation of solid oxide fuel cell–gas turbine hybrid power plant10.1016/S0378-7753(02)00613-4 ↗
12. Feasibility study for SOFC-GT hybrid locomotive power: Part I. Development of a dynamic 3.5 MW SOFC-GT FORTRAN model10.1016/j.jpowsour.2012.04.024 ↗
13. Single-level optimization of a hybrid SOFC–GT power plant10.1016/j.jpowsour.2005.11.108 ↗
14. Design and part-load performance of a hybrid system based on a solid oxide fuel cell reactor and a micro gas turbine10.1016/S0378-7753(00)00668-6 ↗
15. Solid oxide fuel cell/gas turbine trigeneration system for marine applications10.1016/j.jpowsour.2010.11.099 ↗
16. Thermodynamic and exergoeconomic assessments of a new solid oxide fuel cell-gas turbine cogeneration system10.1016/j.enconman.2016.06.017 ↗
17. 4E analysis and multi objective optimization of a micro gas turbine and solid oxide fuel cell hybrid combined heat and power system10.1016/j.jpowsour.2013.08.065 ↗
18. Multi-objective optimization of an indirectly integrated solid oxide fuel cell-gas turbine cogeneration system10.1016/j.ijhydene.2016.09.023 ↗
19. Multi-criteria optimization of a district cogeneration plant integrating a solid oxide fuel cell–gas turbine combined cycle, heat pumps and chillers10.1016/S0360-5442(02)00161-5 ↗
20. Performance analysis and multi-objective optimization of an irreversible solid oxide fuel cell-stirling heat engine hybrid system10.1016/S1452-3981(23)13147-6 ↗
21. Exergy assessment and optimization of a cogeneration system based on a solid oxide fuel cell integrated with a Stirling engine10.1016/j.enconman.2017.04.021 ↗
22. Performance improvement of a direct carbon solid oxide fuel cell system by combining with a Stirling cycle10.1016/j.energy.2017.09.036 ↗
23. Biomass gasification integrated with a solid oxide fuel cell and Stirling engine10.1016/j.energy.2014.01.078 ↗
24. Thermodynamic and thermoeconomic analysis of a system with biomass gasification, solid oxide fuel cell (SOFC) and Stirling engine10.1016/j.energy.2014.01.106 ↗
25. Rokni · 2012 · 269
26. Thermodynamic analysis of SOFC (solid oxide fuel cell)–Stirling hybrid plants using alternative fuels10.1016/j.energy.2013.06.001 ↗
27. Multi-objective optimization of biomass-based solid oxide fuel cell integrated with Stirling engine and electrolyzer10.1016/j.enconman.2018.06.061 ↗
28. Options for using solid oxide fuel cell technology in complex integrated biomass gasification cogeneration plants10.1016/j.biombioe.2019.02.009 ↗
29. Combined solid oxide fuel cell, micro-gas turbine and organic Rankine cycle for power generation (SOFC–MGT–ORC)10.1016/j.enconman.2016.02.080 ↗
30. A study on performance of solid oxide fuel cell‐organic Rankine cycle combined system10.1002/er.1490 ↗
31. Thermodynamic analysis of an integrated gasification solid oxide fuel cell plant combined with an organic Rankine cycle10.1016/j.renene.2013.05.021 ↗
32. Energy analysis of a trigeneration plant based on solid oxide fuel cell and organic Rankine cycle10.1016/j.ijhydene.2009.09.047 ↗
33. Exergy analysis of an integrated solid oxide fuel cell and organic Rankine cycle for cooling, heating and power production10.1016/j.jpowsour.2009.10.075 ↗
34. Design and modeling of a hybrid reversible solid oxide fuel cell–organic Rankine cycle10.1016/j.egypro.2017.09.202 ↗
35. Thermoeconomic assessment of a novel integrated biomass based power generation system including gas turbine cycle, solid oxide fuel cell and Rankine cycle10.1016/j.enconman.2018.01.071 ↗
36. Thermo-environmental and economic analysis of an integrated municipal waste-to-energy solid oxide fuel cell, gas-, steam-, organic fluid-and absorption refrigeration cycle thermal power plants10.1016/j.apenergy.2019.02.032 ↗
37. Gas turbine configuration for improving the performance of combined cycle power plant10.1016/j.proeng.2011.08.791 ↗
38. Development of 2D dynamic model for hydrogen-fed and methane-fed solid oxide fuel cells10.1016/j.jpowsour.2016.08.005 ↗
39. Luo · 2017 · 1883
40. Luo · 2018
41. Analytical solutions and typical characteristics of part-load performances of single shaft gas turbine and its cogeneration10.1016/S0196-8904(02)00018-3 ↗
42. Application of the multi-objective optimization method for designing a powered Stirling heat engine: design with maximized power, thermal efficiency and minimized pressure loss10.1016/j.renene.2013.05.005 ↗
43. Working fluids for high-temperature organic Rankine cycles10.1016/j.energy.2010.10.051 ↗
44. Holman · 1997
45. Comparison of the solid oxide fuel cell system for micro CHP using natural gas with a system using a mixture of natural gas and hydrogen10.1016/j.apenergy.2019.01.039 ↗