journal article·2019-05

Facile and scalable fabrication of high-energy-density sulfur cathodes for pragmatic lithium-sulfur batteries

Min-Seop Kim, Mun Sek Kim, Vandung Do, Yongyao Xia, Woong Kim, Won Il Cho

Publisher page

Abstract

Abstract Lithium-sulfur battery is garnering much of attention due to its high energy densities, low-cost active material of sulfur and variety of applications in portable electronics. High integrity and consistent qualities of the large-scale sulfur cathode with high energy have to be ensured to construct reliable and practical lithium-sulfur batteries that could supersede advancing lithium-ion batteries. Here, facile and productive approaches are developed to mass-produce functional sulfur hosts and to fabricate large-scale sulfur cathode with high sulfur loading. The functional sulfur host is synthesized by anchoring polyethylenimine at the surface of commercially available carbon at inert conditions with a scale of more than 10 g per batch via simple solution method. Combining the functionalized sulfur host with a polyacrylic acid binder allows high integrity and uniformity of the high sulfur loading cathode to be fabricated in large dimensions. Followed by this approach, the sulfur cathode, 70 × 6 cm2, is produced with the sulfur loading of >4.3 mg cm−2. It is found that 12 wt% of polyethylenimine in the functionalized sulfur host with polyacrylic acid is at optimal condition that presents stable electrochemical performances over 600 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries10.1038/nmat2460 ↗
2. Li–O2 and Li–S batteries with high energy storage10.1038/nmat3191 ↗
3. Sulphur-TiO 2 yolk-shell nanoarchitecture with internal void space for long-cycle lithium-sulphur batteries10.1038/ncomms2327 ↗
4. Sulfur nanocrystals confined in carbon nanotube network as a binder-free electrode for high performance lithium sulfur batteries10.1021/nl501486n ↗
5. A long-life, high-rate lithium/sulfur cell: a multifaceted approach to enhancing cell performance10.1021/nl402793z ↗
6. Trapping lithium polysulfides of a Li–S battery by forming lithium bonds in a polymer matrix10.1039/C5EE01809A ↗
7. Smaller sulfur molecules promise better lithium-sulfur batteries10.1021/ja308170k ↗
8. Synthesis of graphitic ordered mesoporous carbon with cubic symmetry and its application in lithium-sulfur batteries10.1088/0957-4484/27/12/125401 ↗
9. Enhanced Li-S batteries using amine-functionalized carbon nanotubes in the cathode10.1021/acsnano.5b06373 ↗
10. Sulfur/graphitic hollow carbon sphere nano-composite as a cathode material for high-power lithium-sulfur battery10.1186/1556-276X-8-343 ↗
11. Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries10.1002/anie.201100637 ↗
12. Safety issues caused by internal short circuits in lithium-ion batteries10.1039/C8TA08997C ↗
13. Unlocking the coupling mechanical-electrochemical behavior of lithium-ion battery upon dynamic mechanical loading10.1016/j.energy.2018.10.142 ↗
14. More reliable lithium-sulfur batteries: status, solutions and prospects10.1002/adma.201606823 ↗
15. High energy density lithium-sulfur batteries: challenges of thick sulfur cathodes10.1002/aenm.201402290 ↗
16. Structural design of lithium–sulfur batteries: from fundamental Research to practical application10.1007/s41918-018-0010-3 ↗
17. A lithium-sulfur cathode with high sulfur loading and high capacity per area: a binder-free carbon fiber cloth-sulfur material10.1039/C4CC03410D ↗
18. Hierarchical free-standing carbon-nanotube paper electrodes with ultrahigh sulfur-loading for lithium-sulfur batteries10.1002/adfm.201401501 ↗
19. A facile layer-by-layer approach for high-areal-capacity sulfur cathodes10.1002/adma.201405689 ↗
20. Pie-like electrode design for high-energy density lithium-sulfur batteries10.1038/ncomms9850 ↗
21. A graphene foam electrode with high sulfur loading for flexible and high energy Li-S batteries10.1016/j.nanoen.2014.11.025 ↗
22. A rGO-CNT aerogel covalently bonded with a nitrogen-rich polymer as a polysulfide adsorptive cathode for high sulfur loading lithium sulfur batteries10.1039/C7TA03552G ↗
23. Strong lithium polysulfide chemisorption on electroactive sites of nitrogen-doped carbon composites for high-performance lithium-sulfur battery cathodes10.1002/anie.201411109 ↗
24. Review on high-loading and high-energy lithium–sulfur batteries10.1002/aenm.201700260 ↗
25. Development of 2.8 V Ketjen black supercapacitors with high rate capabilities for AC line filtering10.1016/j.jpowsour.2017.06.032 ↗
26. Optimization of air electrode for Li/air batteries10.1149/1.3314375 ↗
27. Lithium sulfur primary battery with super high energy density: based on the cauliflower-like structured C/S cathode10.1038/srep14949 ↗
28. Effective polysulfide rejection by dipole-aligned BaTiO3 coated separator in lithium–sulfur batteries10.1002/adfm.201602498 ↗
29. Polyethylenimine-enhanced electrocatalytic reduction of CO2 to formate at nitrogen-doped carbon nanomaterials10.1021/ja5031529 ↗
30. Polyethylenimine–carbon nanotube nanohybrids for siRNA-mediated gene silencing at cellular level10.1039/c0nr01005g ↗
31. Understanding and controlling the rest potential of carbon nanotube-based supercapacitors for energy density enhancement10.1016/j.apsusc.2017.10.044 ↗
32. Designing solid-electrolyte interphases for lithium sulfur electrodes using ionic shields10.1016/j.nanoen.2017.10.018 ↗
33. Raman spectroscopy of graphene and graphite: disorder, electron-phonon coupling, doping and nonadiabatic effects10.1016/j.ssc.2007.03.052 ↗
34. Raman spectroscopy as a versatile tool for studying the properties of graphene10.1038/nnano.2013.46 ↗
35. Graphene supported nickel nanoparticle as a viable replacement for platinum in dye sensitized solar cells10.1039/C2NR11127F ↗
36. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity10.1351/pac198557040603 ↗
37. On the micro-, meso-, and macroporous structures of polymer electrolyte membrane fuel cell catalyst layers10.1021/am900600y ↗
38. Lowell · 2004
39. Covalent bond glued sulfur nanosheet-based cathode integration for long-cycle-life Li-S batteries10.1021/nl403715h ↗
40. In situ characterization of the initial effect of water on molecular interactions at the interface of organic/inorganic hybrid systems10.1038/srep45123 ↗
41. Toward efficient binders for Li-ion battery Si-based anodes: polyacrylic acid10.1021/am100871y ↗
42. A comparative study of different binders and their effects on electrochemical properties of LiMn2O4 cathode in lithium ion batteries10.1016/j.jpowsour.2013.08.051 ↗
43. Understanding the role of different conductive polymers in improving the nanostructured sulfur cathode performance10.1021/nl403130h ↗
44. New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy10.1016/j.jpowsour.2008.10.033 ↗
45. A simple, experiment-based model of the initial self-discharge of lithium-sulphur batteries10.1016/j.jpowsour.2015.12.031 ↗
46. The gap between long lifespan Li-S coin and pouch cells: the importance of lithium metal anode protection10.1016/j.ensm.2016.09.003 ↗