journal article·2017-10Open access

The role of water management on the oxygen transport resistance in polymer electrolyte fuel cell with ultra-low precious metal loading

A.K. Srouji, L.J. Zheng, R. Dross, D. Aaron, M.M. Mench

Abstract

Abstract Limiting current measurements are used to evaluate oxygen transport resistance in the catalyst layer of a polymer electrolyte fuel cell (PEFC). The pressure independent oxygen transport resistance in the electrode is quantified for two cell architectures and two cathode Pt loadings (0.4 and 0.07 mgPt.cm −2 ). The compounded effect of the flow field and Pt loading is used to shed light on the nature of the observed transport resistance, especially its response to fundamentally different flow fields, which is shown to directly or indirectly scale with Pt loading in the open literature. By varying gas pressure and using low oxygen concentrations, the total oxygen transport resistance is divided into intermolecular gas diffusion (a pressure-dependent component) and a pressure independent component, which can be attributed to Knudsen diffusion or dissolution film resistance. The pressure-independent oxygen transport resistance in the catalyst layer varies between 13.3 and 34.4 s/m. It is shown that the pressure independent oxygen transport resistance increases with reduced Pt loading, but that effect is greatly exacerbated by using conventional channel/lands. The results indicate that open metallic element architecture improves the oxygen transport resistance in ultra-low Pt loading electrodes, likely due to enhanced water management at the catalyst layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Toyota Motors Co., Detroit MI. [press release]. “Toyota confirms hydrogen fuel-cell sedan due out in 2015” Aug. 8 2012. Retrieved from: http://www.insideline.com/toyota/toyota-confirms-hydrogen-fuel-cell-sedan-due-out-in-2015.html.
2. Toyota Motors Co. Detroit Auto Show [press release]. “Toyota: $50,000 fuel cell sedan on track to launch in 2015, or sooner”. Retrieved from: http://green.autoblog.com/2011/01/14/toyota-fuel-cell-sedan-on-track-for-2015/.
3. Nissan Motor Co. Japan [press release]. “By 2016 […] all-new fuel cell electric vehicle (FCEV) together with strategic partner, Daimler”. Retrieved from: http://green.autoblog.com/2011/11/29/nissan-fuel-cell-vehicle-on-track-for-2015/.
4. General Motors. Detroit MI. [press release]. “We do believe fuel cells can be commercialized by (the) 2015/2016 time frame”. Retrieved from: http://www.earthtechling.com/2012/09/gm-keeps-2015-in-its-sights-for-fuel-cell-vehicles/.
5. Performance and mass transport in open metallic element architecture fuel cells at ultra-high current density10.1016/j.jpowsour.2012.06.075 ↗
6. Computational exploration of ultra-high current PEFC operation with porous flow field10.1149/2.048207jes ↗
7. High platinum utilization in ultra-low Pt loaded PEM fuel cell cathodes prepared by electrospraying10.1016/j.ijhydene.2010.07.069 ↗
8. Characterization of gas diffusion layers for PEMFC10.1149/1.1764779 ↗
9. Influence of pore-size distribution of diffusion layer on mass-transport problems of proton exchange membrane fuel cells10.1016/S0378-7753(02)00028-9 ↗
10. Analysis of reactant gas transport in a catalyst layer component10.1149/1.2780966 ↗
11. Analysis of reactant gas transport in catalyst layers; effect of Pt-loadings10.1149/1.3210674 ↗
12. The analysis of performance loss with low platinum loaded cathode catalyst layers10.1149/1.3496614 ↗
13. Measurement of oxygen transport resistance in PEM fuel cells by limiting current methods10.1149/1.3152226 ↗
14. The impact of platinum loading on oxygen transport resistance10.1149/2.061212jes ↗
15. Analysis of oxygen dissolution rate from gas phase into Nafion surface and development of an agglomerate model10.1149/1.3484642 ↗
16. Analysis of oxygen transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗
17. Experimental method to determine the mass transport resistance of a polymer electrolyte fuel cell10.1149/1.2218760 ↗
18. Effect of electrode surface area distribution on high current density performance of PEM fuel cells10.1149/2.032201jes ↗
19. Modeling transport in polymer electrolyte fuel cells10.1021/cr020729l ↗
20. Modeling low-platinum-loading effects in fuel cell catalyst layers10.1149/1.3597644 ↗
21. Effects of an agglomerate size distribution on the PEFC agglomerate model10.1016/j.ijhydene.2012.02.099 ↗
22. Depression of proton conductivity in recast Nafion film measured on flat surface10.1016/j.jpowsour.2008.12.141 ↗
23. Gas transport resistance in polymer electrolyte thin films on oxygen reduction reaction catalysts10.1021/acs.langmuir.5b02487 ↗
24. Passive control of liquid water storage and distribution in a PEFC through flow field design10.1016/j.jpowsour.2008.02.028 ↗
25. Impact of channel wall hydrophobicity on through-plane water distribution and flooding behavior in a polymer electrolyte fuel cell10.1016/j.electacta.2009.11.095 ↗
26. Effect of material properties on evaporative water removal from polymer electrolyte fuel cell diffusion media10.1016/j.jpowsour.2010.03.094 ↗
27. The impact of platinum reduction on oxygen transport in proton exchange membrane fuel cells10.1016/j.electacta.2013.11.179 ↗
28. The use of limiting current to determine transport resistance in PEM fuel cells10.1149/1.2356218 ↗
29. Cussler · 1997
30. Computational engineering of porous flow field PEFCs to enable high temperature high power density operation10.1149/2.056302jes ↗
31. Ultra-high current density water management in polymer electrolyte fuel cell with porous metallic flow field10.1016/j.jpowsour.2013.03.145 ↗
32. Performance modeling of the Ballard Mark IV solid polymer electrolyte fuel cell: 1. Mechanistic model development10.1149/1.2043866 ↗
33. Coupled effects of flow field geometry and diffusion media material structure on evaporative water removal from polymer electrolyte fuel cells10.1016/j.ijhydene.2010.07.156 ↗
34. Water management in polymer electrolyte fuel cells through asymmetric thermal and mass transport engineering of the microporous layers10.1149/2.1331608jes ↗