journal article·2017-07Open access

Energy harvesting influences electrochemical performance of microbial fuel cells

Fernanda Leite Lobo, Xin Wang, Zhiyong Jason Ren

Abstract

Abstract Microbial fuel cells (MFCs) can be effective power sources for remote sensing, wastewater treatment and environmental remediation, but their performance needs significant improvement. This study systematically analyzes how active harvesting using electrical circuits increased MFC system outputs as compared to passive resistors not only in the traditional maximal power point (MPP) but also in other desired operating points such as the maximum current point (MCP) and the maximum voltage point (MVP). Results show that active harvesting in MPP increased power output by 81–375% and active harvesting in MCP increased Coulombic efficiency by 207–805% compared with resisters operated at the same points. The cyclic voltammograms revealed redox potential shifts and supported the performance data. The findings demonstrate that active harvesting is a very effective approach to improve MFC performance across different operating points.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microbial Fuel Cells and Bioremediation · Electrochemical sensors and biosensors · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Bioelectrochemical system platform for sustainable environmental remediation and energy generation10.1016/j.biotechadv.2015.04.003 ↗
2. Environmental Science towards Sustainable Wastewater Treatment by Using Microbial Fuel Cells-centered Technologies10.1039/C3EE43106A ↗
3. Alternative power sources for remote sensors: a review10.1016/j.jpowsour.2013.06.081 ↗
4. Exoelectrogenic bacteria that power microbial fuel cells10.1038/nrmicro2113 ↗
5. The power of glove: soft microbial fuel cell for low-power electronics10.1016/j.jpowsour.2013.10.096 ↗
6. Practical energy harvesting for microbial fuel cells: a review10.1021/es5047765 ↗
7. Capturing power at higher voltages from arrays of microbial fuel cells without voltage reversal10.1039/c1ee02451e ↗
8. Hysteresis-controller-based energy harvesting scheme for microbial fuel cells with parallel operation capability10.1109/TEC.2012.2196044 ↗
9. Microbial fuel cell energy harvesting using synchronous flyback converter10.1016/j.jpowsour.2013.09.017 ↗
10. The electrochemical behavior of three air cathodes for microbial electrochemical system (MES) under meter scale water pressure10.1016/j.jpowsour.2014.05.028 ↗
11. Power electronic converters for microbial fuel cell energy extraction: effects of inductance, duty ratio, and switching frequency10.1016/j.jpowsour.2012.07.092 ↗
12. Electrical energy generation from a large number of microbial fuel cells operating at maximum power point electrical load10.1016/j.jpowsour.2012.01.082 ↗
13. The effect of real-time external resistance optimization on microbial fuel cell performance10.1016/j.watres.2010.11.033 ↗
14. High performance monolithic power management system with dynamic maximum power point tracking for microbial fuel cells10.1021/es501426j ↗
15. Hysteresis controller based maximum power point tracking energy harvesting system for microbial fuel cells10.1016/j.jpowsour.2012.01.053 ↗
16. Active energy harvesting from microbial fuel cells at the maximum power point without using resistors10.1021/es300313d ↗
17. Microbial electrolysis cells for waste biorefinery: a state of the art review10.1016/j.biortech.2016.03.034 ↗
18. Use of a liter-scale microbial desalination cell as a platform to study bioelectrochemical desalination with salt solution or artificial seawater10.1021/es200127p ↗
19. Characterization of microbial fuel cells at microbially and electrochemically meaningful time scales10.1021/es103115a ↗
20. Is resistance futile? Changing external resistance does not improve microbial fuel cell performance10.1016/j.bioelechem.2009.09.001 ↗
21. Increased performance of single-chamber microbial fuel cells using an improved cathode structure10.1016/j.elecom.2006.01.010 ↗
22. Enhanced bioremediation of hydrocarbon-contaminated soil using pilot-scale bioelectrochemical systems10.1016/j.jhazmat.2014.03.060 ↗
23. Nickel based catalysts for highly efficient H2 evolution from wastewater in microbial electrolysis cells10.1016/j.electacta.2016.04.167 ↗
24. Alternating current influences anaerobic electroactive biofilm activity10.1021/acs.est.6b00813 ↗
25. Microbial fuel Cells;: methodology and technology10.1021/es0605016 ↗
26. Electrochemical corrosion of carbon steel exposed to biodiesel/simulated seawater mixture10.1016/j.corsci.2011.12.015 ↗
27. Methods for understanding microbial community structures and functions in microbial fuel cells: a review10.1016/j.biortech.2014.08.096 ↗
28. Pluggable microbial fuel cell stacks for septic wastewater treatment and electricity production10.1016/j.biortech.2014.12.100 ↗
29. Adaptation to high current using low external resistances eliminates power overshoot in microbial fuel cells10.1016/j.bios.2011.06.045 ↗
30. Influence of anode potentials on selection of Geobacter strains in microbial electrolysis cells10.1016/j.biortech.2013.04.047 ↗