Study of superhydrophobic electrosprayed catalyst layers using a localized reference electrode technique
Source abstract
Abstract
The performance of electrosprayed cathode catalyst layers in a polymer electrolyte membrane fuel cell (PEMFC) is studied using a localized reference electrode technique. Single cells with an electrosprayed cathode catalyst layer show an increase of >20% in maximum power density under standard testing conditions, compared with identical cells assembled with a conventional, state-of-the-art, gas diffusion cathode. When operated at high current density (1.2 A cm −2 ) the electrosprayed catalyst layers show more homogeneous distribution of the localized cathode potential, with a standard deviation from inlet to outlet of <50 mV, compared with 79 mV for the conventional gas diffusion cathode. Higher performance and homogeneity of cell response is attributed to the superhydrophobic nature of the macroporous electrosprayed catalyst layer structure, which enhances the rate of expulsion of liquid water from the cathode. On the other hand, at low current densities (<0.5 A cm −2 ), the electrosprayed layers exhibit more heterogeneous distribution of cathode potential than the conventional cathodes; this behavior is attributed to less favorable kinetics for oxygen reduction in very hydrophobic catalyst layers. The optimum performance may be obtained with electrosprayed catalyst layers employing a high Pt/C catalyst ratio.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Electrochemical sensors and biosensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Local characterization of PEFCs by differential cells: systematic variations of current and asymmetric relative humidity10.1149/2.080401jes ↗
2. Local flooding phenomena in channel and land areas occurring during dynamic operation of a PEFC10.1002/fuce.201200030 ↗
3. Current distribution mapping for PEMFCs10.1016/j.electacta.2015.06.081 ↗
4. The role of nanostructure in the electrochemical oxidation of model-carbon materials in acidic environments10.1149/1.3374662 ↗
5. Effects of operating conditions on durability of polymer electrolyte membrane fuel cell Pt cathode catalyst layer10.1016/j.jpowsour.2010.12.068 ↗
6. A reverse-current decay mechanism for fuel cells10.1149/1.1896466 ↗
7. Damage to the cathode catalyst of a PEM fuel cell caused by localized fuel starvation’10.1149/1.2167930 ↗
8. A mechanistic model for pinhole growth in fuel-cell membranes during cyclic loads10.1149/2.036408jes ↗
9. Water management in cathode catalyst layers of PEM fuel cells10.1149/1.2160435 ↗
10. Water transport mechanisms in PEMFC gas diffusion layers10.1149/1.3468615 ↗
11. Effect of the PTFE content in the gas diffusion layer on water transport in polymer electrolyte fuel cells (PEFCs)10.1016/j.jpowsour.2013.06.138 ↗
12. Cross-sectional visualization and analysis of droplet behavior in gas flow channel in PEFC10.1149/2.055401jes ↗
13. Effect of channel material on water droplet dynamics in a PEMFC gas channel10.1149/2.030306jes ↗
14. Atomic force microscopy and infrared analysis of aging processes of polymer electrolyte membrane fuel cell components10.1016/j.jelechem.2011.07.014 ↗
15. Computational engineering of porous flow field PEFCs to enable high temperature high power density operation10.1149/2.056302jes ↗
16. Damage to the cathode catalyst of a PEM fuel cell caused by localized fuel starvation10.1149/1.2167930 ↗
17. Dynamic characteristics of local current densities and temperatures in proton exchange membrane fuel cells during reactant starvations10.1016/j.ijhydene.2011.04.120 ↗
18. Water uptake of fuel-cell catalyst layers10.1149/2.031209jes ↗
19. Analysis of capillary flow driven model for water transport in PEFC cathode catalyst layer: consideration of mixed wettability and pore size distribution
20. Experimental analysis of the reaction layer structure in a gas diffusion electrode10.1016/0022-0728(85)80007-3 ↗
21. Investigation of the microstructure in the catalyst layer and effects of both perfluorosulfonate ionomer and PTFE-loaded carbon on the catalyst layer of polymer electrolyte fuel cells10.1149/1.2048477 ↗
22. Effect of pore structure of catalyst layer in a PEMFC on its performance10.1016/S0360-3199(02)00156-8 ↗
23. Optimal catalyst layer structure of polymer electrolyte membrane fuel cell10.1016/j.ijhydene.2011.05.073 ↗
24. Properties of catalyst layers for PEMFC electrodes prepared by electrospray deposition10.1149/1.3425740 ↗
25. New preparation method for polymer-electrolyte fuel cells10.1149/1.2044068 ↗
26. PEMFC electrode preparation by electrospray: optimization of catalyst load and ionomer content10.1016/j.cattod.2008.12.003 ↗
27. In situ mapping of electrode potential in a PEM fuel cell10.1016/j.elecom.2012.01.007 ↗
28. Catalyst layers for proton exchange membrane fuel cells prepared by electrospray deposition on Nafion membrane10.1016/j.jpowsour.2010.09.096 ↗
29. Study of the constrained expansion of Nafion within the hardware of a PEMFC10.1149/06403.0729ecst ↗
30. In situ mapping of potential transients during start-up and shut-down of a polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2014.05.040 ↗
31. Improvement of water management in polymer electrolyte membrane fuel cell thanks to cathode cracks10.1016/j.jpowsour.2010.03.025 ↗
32. Microstructural and mechanical characterization of catalyst coated membranes subjected to in situ hygrothermal fatigue10.1149/2.0471514jes ↗
33. Contact angle and wetting properties
34. Superhydrophobic surfaces: beyond lotus effect
35. Characterization of polymer electrolyte fuel cells using AC impedance spectroscopy10.1149/1.1836485 ↗
36. Lasia · 2014
37. M.A. Folgado, P. Ferreira-Aparicio, A.M. Chaparro, in preparation.
38. A microelectrode study of oxygen reduction at the platinum/recast-Nafion film interface10.1149/1.2069299 ↗