journal article·2008-05

Influence of micro-porous layer and operating conditions on the fluoride release rate and degradation of PEMFC membrane electrode assemblies

Sumit Kundu, Kunal Karan, Michael Fowler, Leonardo C. Simon, Brant Peppley, Ela Halliop

Journal of Power Sources· Volume 179· Issue 2
Publisher page

Abstract

In this study, the influence of micro-porous layers (MPL) on polymer electrolyte membrane fuel cell (PEMFC) durability was investigated. Two fuel cells were built, one with a micro-porous layer on the anode side, and a second cell with MPL on both sides. Experiments were conducted by varying operational parameters such as current density, reactant stoichiometry, and inlet relative humidity. Fuel cell degradation was evaluated by measuring fluoride release rates. The largest factor determining fluoride release rate was found to be the presence of MPL; the cell with MPLs on both sides exhibited significantly reduced fluoride release rates compared to that of cell with one MPL. Increasing the current density also reduced the fluoride release rate for cells with only one MPL whereas there was only a moderate effect on cells with two MPLs. Microscopy analysis showed small but significant changes in ionomer layer thickness. Polarization measurements indicated that there was little change in the performance for both cells over the test period.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Kundu · J. Power Sources · 2006 · 157 · 65010.1016/j.jpowsour.2005.12.027 ↗
2. LaConti · 2003 · 647
3. C.H. Paik, T. Skiba, V. Mittal, S. Motupally, T.D. Jarvi, Proceedings of the 207th Meeting of the Electrochemical Society—Meeting Abstracts, 2005, 771.10.1149/MA2005-01/18/771 ↗
4. Mathias · Electrochem. Soc. Interface · 2005 · 14 · 2410.1149/2.F05053IF ↗
5. Guo · J. Power Sources · 2006 · 160 · 126910.1016/j.jpowsour.2006.02.093 ↗
6. Endoh · Electrochem. Solid-State Lett. · 2004 · 7 · A20910.1149/1.1739314 ↗
7. St Pierre · J. New Mater. Electrochem. Syst. · 2000 · 3 · 99
8. Collier · Int. J. Hydrogen Energy · 2006 · 31 · 183810.1016/j.ijhydene.2006.05.006 ↗
9. Karan · Electrochem. Solid-State Lett. · 2007 · 10 · B3410.1149/1.2398728 ↗
10. Atiyeh · J. Power Sources · 2007 · 170 · 11110.1016/j.jpowsour.2007.04.016 ↗
11. Pharoah · ECS Trans. · 2006 · 3 · 122710.1149/1.2356242 ↗
12. Curtin · J. Power Sources · 2004 · 131 · 4110.1016/j.jpowsour.2004.01.023 ↗
13. Panchenko · Phys. Chem. Chem. Phys. · 2004 · 6 · 289110.1039/b404253k ↗
14. Inaba · 2005 · 395
15. Healy · Fuel Cells · 2005 · 5 · 30210.1002/fuce.200400050 ↗
16. Aoki · Electrochem. Commun. · 2006 · 8 · 150910.1016/j.elecom.2006.07.017 ↗
17. Kadjo · Russ. J. Electrochem. · 2006 · 42 · 46710.1134/S1023193506050041 ↗
18. Mittal · J. Electrochem. Soc. · 2006 · 153 · 175510.1149/1.2219708 ↗
19. Kinumoto · J. Power Sources · 2006 · 158 · 122210.1016/j.jpowsour.2005.10.043 ↗
20. Liu · ECS Trans. · 2006 · 3 · 49310.1149/1.2356171 ↗
21. Ohma · ECS Trans. · 2006 · 3 · 51910.1149/1.2356173 ↗
22. Ohma · J. Electrochem. Soc. · 2007 · 154 · 75710.1149/1.2741129 ↗
23. Pierpont · ECS Trans. · 2005 · 1 · 229
24. Rama · Proc. Inst. Mech. Eng. Part A: J. Power Energy · 2006 · 220 · 53510.1243/09576509JPE212 ↗