Effect of the specific surface area on thermodynamic and kinetic properties of nanoparticle anatase TiO2 in lithium-ion batteries
Source abstract
Abstract
Abstract Anatase TiO2 nanoparticles with a specific surface area of 100 m2 g−1 and 300 m2 g−1 have been investigated as negative insertion electrode material for lithium-ion batteries. Galvanostatic intermittent titration (GITT) and electrochemical impedance spectroscopy (EIS) were used to investigate the effect of the specific surface area on the performance of the material. GITT was performed at C/10 rate, followed by an EIS measurement after each relaxation step. Separation of kinetic and thermodynamic contributions to the overpotential of the phase transformation on Li+ (de-)insertion allowed revealing a dependency of both terms on the specific surface area. The material with higher surface area undergoes intrinsic transformation during the initial cycles affecting the thermodynamics of (de-)insertion while the sample with lower surface area shows large and asymmetric kinetic hindrances. For the material with 15 nm particles, Li+ de-insertion appears to have a higher resistance than lithium insertion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Nanostructures and lithium electrochemical reactivity of lithium titanites and titanium oxides: a review10.1016/j.jpowsour.2009.02.038 ↗
2. Green energy storage materials: nanostructured TiO2 and Sn-based anodes for lithium-ion batteries10.1039/b823474d ↗
3. Nano dimensionality: a way towards better Li-ion storage10.2174/22106812112029990012 ↗
4. CNTs grown on oxygen-deficient anatase TiO2−δ as high-rate composite electrode material for lithium ion batteries10.1016/j.elecom.2012.09.031 ↗
5. A carbon-coated TiO2(B) nanosheet composite for lithium ion batteries10.1039/c4cc01888e ↗
6. Ammonia-annealed TiO2 as a negative electrode material in Li-Ion batteries: n doping or oxygen deficiency?10.1002/chem.201302306 ↗
7. TiO2 (B)/anatase composites synthesized by spray drying as high performance negative electrode material in Li-ion batteries10.1002/cssc.201300439 ↗
8. Advanced titania nanostructures and composites for lithium ion battery10.1007/s10853-011-5974-x ↗
9. Lithium insertion into mesoporous anatase with an ordered 3D pore structure10.1002/ange.200907099 ↗
10. In situ structural changes upon electrochemical lithium insertion in nanosized anatase TiO210.1021/jp908786t ↗
11. Mesoporous TiO2 with high packing density for superior lithium storage10.1039/c003630g ↗
12. Properties and promises of nanosized insertion materials for Li-ion batteries10.1021/ar2001793 ↗
13. Aging effects of anatase TiO2 nanoparticles in Li-ion batteries10.1039/c4cp00630e ↗
14. In situ visualization of Li-ion insertion and formation of the solid electrolyte interphase on TiO2 based paste electrodes using scanning electrochemical microscopy10.1039/c3cc44576c ↗
15. Large impact of particle size on insertion reactions. A case for anatase LixTiO210.1021/ja067733p ↗
16. Particle size dependence of the lithium storage capability and high rate performance of nanocrystalline anatase TiO2 electrode10.1016/j.jpowsour.2007.01.004 ↗
17. Pseudocapacitive contributions to electrochemical energy storage in TiO2 (Anatase) nanoparticles10.1021/jp074464w ↗
18. Simple synthesis and particle size effects of TiO2 nanoparticle anodes for rechargeable lithium ion batteries10.1016/j.electacta.2012.11.104 ↗
19. The electronic structure and ionic diffusion of nanoscale LiTiO2 anatase10.1039/b823142g ↗
20. The importance of cell geometry for electrochemical impedance spectroscopy in three-electrode lithium ion battery test cells10.1016/j.elecom.2012.06.010 ↗
21. Experimental limitations in impedance spectroscopy: part I—simulation of reference electrode artifacts in three-point measurements
22. Experimental limitations in impedance spectroscopy: part III. Effect of reference electrode geometry/position10.1016/S0167-2738(97)00073-8 ↗
23. Analysis of three-electrode setups for AC-impedance measurements on lithium-ion cells by FEM simulations10.1149/2.100202jes ↗
24. FEM modelling of a coaxial three-electrode test cell for electrochemical impedance spectroscopy in lithium ion batteries10.1016/j.jpowsour.2013.03.186 ↗
25. Equilibrium lithium transport between nanocrystalline phases in intercalated TiO2 anatase10.1038/nature00901 ↗
26. One-step hydrothermal synthesis of mesoporous anatase TiO2 microsphere and interfacial control for enhanced lithium storage performance10.1021/am200872c ↗
27. SEI formation on TiO2 rutile10.1149/2.085206jes ↗
28. TiO2 rutile – an alternative anode material for safe lithium-ion batteries10.1016/j.jpowsour.2010.09.109 ↗
29. Sandwich-like, graphene-based titania nanosheets with high surface area for fast lithium storage10.1002/adma.201101599 ↗
30. Facile synthesis of nanocrystalline TiO2 mesoporous microspheres for lithium-ion batteries10.1021/jp1087509 ↗
31. Preparation and electrochemical performance of TiO2/C composite nanotubes as anode materials of lithium-ion batteries10.1016/j.jpowsour.2011.09.039 ↗
32. Reliable reference electrodes for lithium-ion batteries10.1016/j.elecom.2013.03.015 ↗
33. Reliable benchmark material for anatase TiO2 in Li-ion batteries: on the role of dehydration of commercial TiO210.1016/j.jpowsour.2014.05.018 ↗
34. Impact of the specific surface area on the memory effect in Li-ion batteries: the case of anatase TiO210.1002/aenm.201400829 ↗
35. A thermodynamic model of hysteresis in phase transitions and its application to rare earth oxide systems10.1063/1.434557 ↗
36. Scanning electrochemical microscopy applied to the investigation of lithium (de-)insertion in TiO210.1002/elan.201400613 ↗
37. Impedance spectroscopy on porous materials: a general model and application to graphite electrodes of lithium-ion batteries10.1016/j.electacta.2007.12.060 ↗