journal article·2023-10

The efficient solid electrochemical corrosion prelithiation of graphite and SiOx/C anodes for longer-lasting lithium ion batteries

Yuke Wang, Jia Lu, Yan Qiao, Wangqi Dai, Heyi Xia, Changrong Yu, Yiwen Hu, Ziqiang Ma, Zhengwen Fu

Publisher page

Abstract

In order to avoid side reactions with liquid electrolyte for the prelithiation method using metal lithium for the improvement of initial coulombic efficiency and prelithiation efficiency, we propose the solid electrochemical corrosion (SEC) of lithium replacing liquid electrolyte with solid electrolyte of lithium phosphorus oxynitride (LiPON) in previous works. However, the low prelithiation rate of solid electrochemical corrosion with LiPON interlayer between anode and lithium hinders its possible large-scale application. Here, an ultrathin film of Bi 2O 3 is introduced as the interface layer to improve the prelithiation rate of SEC, the prelithiation effects are investigated on both graphite and SiO x/C anodes by morphological, spectroscopic and electrochemical characterizations. The initial coulombic efficiencies of graphite and SiO x/C anodes can be respectively increased by about 5.1% and 9.7% after the prelithiation. The prelithiation efficiency values are as high as 79.3% for graphite and 86.7% for SiO x/C with SEC prelithiation. Our results demonstrate that SEC prelithiation with Bi 2O 3 interface layer could be applied to improve the capacity and cycling performance of lithium-ion batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Building better batteries10.1039/C8SE00436F ↗
2. The success story of graphite as a lithium-ion anode material-fundamentals, remaining challenges, and recent developments including silicon (oxide) composites10.1039/D0SE00175A ↗
3. Mechanistic insight into the impact of pre-lithiation on the cycling stability of lithium-ion battery10.1016/j.mattod.2022.07.008 ↗
4. Mitigating irreversible capacity loss for higher-energy lithium batteries10.1016/j.ensm.2022.03.004 ↗
5. A new strategy to mitigate the initial capacity loss of lithium ion batteries10.1016/j.jpowsour.2016.05.063 ↗
6. Role of Li6CoO4 cathode additive in Li-ion cells containing low coulombic efficiency anode material10.1149/2.085208jes ↗
7. Sacrificial salts: compensating the initial charge irreversibility in lithium batteries10.1016/j.elecom.2010.07.016 ↗
8. Li3N as a cathode additive for high-energy-density lithium-ion batteries10.1002/aenm.201502534 ↗
9. Stabilized Li3N for efficient battery cathode prelithiation10.1016/j.ensm.2016.10.004 ↗
10. Battery prelithiation enabled by lithium fixation on cathode10.1016/j.jpowsour.2020.229109 ↗
11. High-efficiency sacrificial prelithiation of lithium-ion capacitors with superior energy-storage performance10.1016/j.ensm.2019.08.023 ↗
12. DMF stabilized Li3N slurry for manufacturing self-prelithiatable lithium-ion capacitors10.1016/j.scib.2019.11.014 ↗
13. Li2O removal from Li5FeO4: a cathode precursor for lithium-ion batteries10.1021/cm902713m ↗
14. Improving the cyclability of silicon anodes for lithium-ion batteries using a simple pre-lithiation method10.1016/j.jpowsour.2020.228066 ↗
15. Toward practical application of functional conductive polymer binder for a high-energy lithium-ion battery design10.1021/nl503490h ↗
16. Application of Stabilized Lithium Metal Powder (SLMP®) in graphite anode - a high efficient prelithiation method for lithium-ion batteries10.1016/j.jpowsour.2014.02.112 ↗
17. Recent advances in prelithiation materials and approaches for lithium-ion batteries and capacitors10.1016/j.ensm.2020.07.009 ↗
18. Recent advances and perspectives on prelithiation strategies for lithium-ion capacitors10.1007/s12598-022-02050-w ↗
19. Prelithiated silicon nanowires as an anode for lithium ion batteries10.1021/nn2017167 ↗
20. Investigation of pre-lithiation in graphite and hard-carbon anodes using different lithium source structures10.1149/2.1511714jes ↗
21. High-performance lithiated SiOx anode obtained by a controllable and efficient prelithiation strategy10.1021/acsami.9b12086 ↗
22. Ambient-air stable lithiated anode for rechargeable Li-ion batteries with high energy density10.1021/acs.nanolett.6b03655 ↗
23. Controlled prelithiation of silicon monoxide for high performance lithium-ion rechargeable full cells10.1021/acs.nanolett.5b03776 ↗
24. Graphite prelithiation by solid electrochemical corrosion of lithium metal with a superficial mosaic structure10.1039/D1CC04217C ↗
25. Solid-state corrosion of lithium for prelithiation of SiOx-C composite anode with carbon-incorporated lithium phosphorus oxynitride
26. Composite lithium with high ionic conducting Li3Bi alloy enabled high-performance garnet-type solid-state lithium batteries10.1016/j.cej.2023.142895 ↗
27. Lithium transport and intermetallic generation in Li–Bi liquid metal batteries10.1016/j.electacta.2021.139779 ↗
28. Effect of Fe3+ doping on structural, optical and electrical properties δ-Bi2O3 thin films10.1016/j.cap.2009.06.060 ↗
29. Enhanced electrochemical performances of Bi2O3/rGO nanocomposite via chemical bonding as anode materials for lithium ion batteries10.1021/acsami.7b00996 ↗
30. In situ synchrotron wide-angle X-ray scattering study on rapid lithiation of graphite anode via direct contact method for Li-ion capacitors10.1016/j.jpowsour.2015.01.193 ↗
31. Operando NMR and XRD study of chemically synthesized LiCx oxidation in a dry room environment10.1016/j.jpowsour.2015.04.035 ↗
32. On the practical applicability of the Li metal-based thermal evaporation prelithiation technique on Si anodes for lithium ion batteries
33. Long-life and high volumetric capacity Bi2Sn2O7 anode with interpenetrating Bi-O and Sn-O networks10.1016/j.xcrp.2022.101109 ↗
34. Synthesis of graphene and recovery of lithium from lithiated graphite of spent Li-ion battery10.1016/j.wasman.2021.01.017 ↗
35. Solid electrolyte interphase on native oxide-terminated silicon anodes for Li-ion batteries10.1016/j.joule.2018.12.013 ↗
36. Analysis of hard carbon for lithium-ion batteries by hard X-ray photoelectron spectroscopy10.1016/j.jpowsour.2013.05.160 ↗
37. Role of the LiPF6 salt for the long-term stability of silicon electrodes in Li-ion batteries - a photoelectron spectroscopy study10.1021/cm303399v ↗
38. Electrochemical properties and Li deposition morphologies of surface modified graphite after grinding10.1016/j.jpowsour.2008.08.048 ↗
39. New insight on graphite anode degradation induced by Li-plating10.1002/eem2.12334 ↗
40. Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries
41. A growing appreciation for the role of LiF in the solid electrolyte interphase10.1002/aenm.202100046 ↗
42. Evolving affinity between Coulombic reversibility and hysteretic phase transformations in nano-structured silicon-based lithium-ion batteries10.1038/s41467-018-02824-w ↗
43. Dual-functional cathodic prelithiation reagent of Li3P in lithium-ion battery for compensating initial capacity loss and enhancing safety10.1021/acsaem.1c00773 ↗
44. The roles of intermediate phases of Li-Si alloy as anode materials for lithium-ion batteries10.1016/S1875-5372(11)60003-9 ↗
45. Confronting issues of the practical implementation of Si anode in high-energy lithium-ion batteries10.1016/j.joule.2017.07.006 ↗
46. Electrochemical impedance study on the low temperature of
47. EIS and GITT studies on oxide cathodes, O2-Li(2/3)+x(Co0.15Mn0.85)O2 (x = 0 and 1/3)10.1016/S0013-4686(03)00317-7 ↗