Constructing high performance Li-rich Mn-based cathode via surface phase structure controlling and ion doping
Source abstract
Abstract
Li-rich Mn-based cathode materials are one kind of the promising potential candidates to electric vehicles powered by high-energy density lithium-ion batteries due to its much higher theoretical energy density. Unfortunately, the rapid capacity fading and voltage decay are the most critical factors affecting its practical application. Herein, Li 1 · 17Na 0 · 02Mn 0 · 54Ni 0 · 13Co 0 · 13O 2 (PN-LMNCO) is prepared via surface phase structure controlling and ion doping through an architecture strategy of surface lithium deficiency. It is found that the existence of lithium deficiencies can induce surface phase transformation, and thus resulting in an in-situ spinel surface conversion film, which can restrain the structure degradation during subsequent charge/discharge process. In addition, because of the larger ion radius than Li +, Na + doping can effectively increase the spacing between Li layers, and thus improve the rate capacity. Accordingly, the as-prepared sample displays as a significantly higher initial coulombic efficiency (91.2%). After 200 cycles at 1 C, the PN-LMNCO can retain 94.7% discharge specific capacity. Furthermore, PN-LMNCO can still show a good discharge capacity of 214 mA h g −1 even at a high current rate of 5 C. Therefore, this work can preferably meet the need of the development of electric vehicle for high-energy density Lithium-ion battery.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Sufficient oxygen redox activation against voltage decay in Li-rich layered oxide cathode materials10.1021/acsmaterialslett.1c00088 ↗
2. Revealing the thermodynamics and kinetics of in-plane disordered Li2MnO3 structure in Li-Rich cathodes10.1021/acsenergylett.1c01904 ↗
3. A universal strategy toward the precise regulation of initial coulombic efficiency of Li-rich Mn-based cathode materials10.1002/adma.202103173 ↗
4. Ni/Mn and Al dual concentration-gradients to mitigate voltage decay and capacity fading of Li-Rich layered cathodes10.1021/acsenergylett.1c01215 ↗
5. Restraining oxygen release and suppressing structure distortion in single-crystal Li-Rich layered cathode materials
6. Improved electrochemical performance of Li-Rich layered oxide cathodes enabled by a two-step heat treatment10.1021/acsami.1c00723 ↗
7. Phase compatible NiFe2O4 coating tunes oxygen redox in Li-Rich layered oxide10.1021/acsnano.1c02023 ↗
8. Long-term cycle stability enabled by the incorporation of Ni into Li2MnO3 phase in the Mn-based Li-Rich layered materials10.1021/acsenergylett.1c00057 ↗
9. Phase transformation of lithium-rich oxide cathode in full cell and its suppression by solid electrolyte interphase on graphite anode10.1002/eem2.12034 ↗
10. Anionic redox in rechargeable lithium batteries
11. Temperature-sensitive structure evolution of lithium-manganese-rich layered oxides for lithium-ion batteries10.1021/jacs.8b07858 ↗
12. Mitigating voltage and capacity fading of lithium-rich layered cathodes by lanthanum doping10.1016/j.jpowsour.2016.10.042 ↗
13. Mechanisms and applications of layer/spinel phase transition in Li- and Mn-rich cathodes for lithium-ion batteries10.1007/s12598-021-01896-w ↗
14. Remaining Li-content dependent structural evolution during high temperature re-heat treatment of quantitatively delithiated Li-Rich cathode materials with surface defect-spinel phase10.1021/acsami.0c05756 ↗
15. Regulating anion redox and cation migration to enhance the structural stability of Li-Rich layered oxides10.1021/acsami.1c01351 ↗
16. Suppressing surface lattice oxygen release of Li-Rich cathode materials via heterostructured spinel Li4Mn5O12 coating
17. Layered lithium-rich oxide nanoparticles doped with spinel phase: acidic sucrose-assistant synthesis and excellent performance as cathode of lithium ion battery10.1021/acsami.5b10219 ↗
18. Suppression of structural phase transformation of Li-rich Mn-based layered cathode materials with Na ion substitution strategy10.1016/j.electacta.2020.136402 ↗
19. Host structural stabilization of Li1.232Mn0.615Ni0.154O2 through K-doping attempt: toward superior electrochemical performances10.1016/j.electacta.2015.12.021 ↗
20. Lithium deficiencies engineering in Li-Rich layered oxide Li1.098Mn0.533Ni0.113Co0.138O2 for high-stability cathode10.1021/jacs.9b04974 ↗
21. Heating-temperature-dependent electrochemical-performance-enhanced surface structural evolution during chemical treatment of Li-rich layered material by sodium thiosulfate10.1016/j.jpowsour.2020.227795 ↗
22. A Li-rich layered-spinel cathode material for high capacity and high rate lithium-ion batteries fabricated via a gas-solid reaction10.1007/s40843-020-1433-4 ↗
23. Multiscale deficiency integration by Na-Rich engineering for high-stability Li-Rich layered oxide cathodes10.1021/acsami.0c19040 ↗
24. Spinel/layered heterostructured lithium-rich oxide nanowires as cathode material for high-energy lithium-ion batteries10.1021/acsami.7b11942 ↗
25. Combustion synthesis and electrochemical performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2 with improved rate capability10.1016/j.jpowsour.2012.11.091 ↗
26. Influence of morphology and compositional mixing on the electrochemical performance of Li-Rich layered oxides derived from nanoplatelet-shaped transition metal oxide–hydroxide precursors10.1021/acs.energyfuels.0c04061 ↗
27. Morphology control and Na+ doping toward high-performance Li-Rich layered cathode materials for lithium-ion batteries10.1021/acssuschemeng.0c06595 ↗
28. Revealing the role of spinel phase on Li-rich layered oxides: a review10.1016/j.cej.2021.131978 ↗
29. Kinetic rejuvenation of Li-Rich Li-ion battery cathodes upon oxygen redox10.1021/acsaem.0c01315 ↗
30. Tuning the nanoarea interfacial properties for the improved performance of Li-Rich polycrystalline Li-Mn-O spinel10.1021/acsami.9b01651 ↗
31. Manipulating the local electronic structure in Li-Rich layered cathode towards superior electrochemical performance10.1002/adfm.202100783 ↗
32. Origin of extra capacity in advanced Li–Rich cathode materials for rechargeable Li–ion batteries10.1016/j.cej.2021.130293 ↗
33. Evolution mechanism of phase transformation of Li-rich cathode materials in cycling10.1016/j.electacta.2019.135109 ↗
34. Surface spinel and interface oxygen vacancies enhanced lithium-rich layered oxides with excellent electrochemical performances10.1016/j.cej.2022.136434 ↗
35. High-capacity cathode material with high voltage for Li-ion batteries10.1002/adma.201705575 ↗
36. Improving the electrochemical performance of Li1.2Mn0.54Ni0.13Co0.13O2 cathode through sodium doping10.1016/j.electacta.2021.139775 ↗
37. Inhibiting oxygen release from Li-rich, Mn-rich layered oxides at the surface with a solution processable oxygen scavenger polymer10.1002/aenm.202100552 ↗
38. Reinforcing Li-rich layer cathode via artificial surface reconstruction of spinel shell containing Ni3+10.1016/j.apsusc.2021.149626 ↗