Thermo-electrochemical simulation of the cooling process in a compact battery pack considering various configurations
Source abstract
Abstract
Lithium-ion battery (LIB) packs with high power density are necessary in battery-powered system development. In this study, we investigated LIB packs made of compact cylindrical Li-ion batteries. We arranged the batteries in various patterns, including square, lozenge, elliptical, and circular, with all patterns occupying the same total area. We solved the thermal and electrochemical equations governing the batteries using the finite-element method (FEM), and we coupled the airflow around the batteries, meant to lower their temperature, with the LIB equations and solved them using the same method. The results reveal that LIB cooling enhancement and a smaller temperature gradient occur with an increase in the LIB distribution at the center, reducing their outward dissemination and shortening the LIB length. Additionally, increasing the cross-sectional area and airflow velocity enhanced heat transfer from the batteries and decreased their temperature. Finally, we demonstrated that better cooling enhances the cells’ long-term performance. With a circular configuration, the pressure drop and heat transfer rise by 48.01% and 85.14%, respectively, with an increase in the inlet cross-section area. Furthermore, the pressure drop and heat transfer in this configuration increased by 89.09% and 66.90%, respectively, when the velocity increases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advanced battery technologies research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. What do we really know about the acceptance of battery electric vehicles?–Turns out, not much
2. Introducing electric vehicles? Impact of network effect on profits and social welfare10.1016/j.energy.2021.123002 ↗
3. Technology development of electric vehicles: a review10.3390/en13010090 ↗
4. A review on electric vehicles: technologies and challenges10.3390/smartcities4010022 ↗
5. Nilsson · 2011
6. Dhameja · 2001
7. Electric vehicle battery technologies
8. Comparison of different cooling methods for lithium ion battery cells10.1016/j.applthermaleng.2015.10.015 ↗
9. Effects of different coolants and cooling strategies on the cooling performance of the power lithium ion battery system: a review10.1016/j.applthermaleng.2018.06.043 ↗
10. A review of air-cooling battery thermal management systems for electric and hybrid electric vehicles10.1016/j.jpowsour.2021.230001 ↗
11. Review on battery thermal management system for electric vehicles10.1016/j.applthermaleng.2018.12.020 ↗
12. A review of MHP technology and its research status in cooling of Li-ion power battery and PEMFC10.1021/acs.energyfuels.0c02661 ↗
13. A review on hybrid thermal management of battery packs and it's cooling performance by enhanced PCM10.1016/j.rser.2021.111513 ↗
14. Battery thermal management in EV and HEVs: issues and solutions
15. A comprehensive review on a passive (phase change materials) and an active (thermoelectric cooler) battery thermal management system and their limitations10.1016/j.jpowsour.2018.08.094 ↗
16. Combining an active method and a passive method in cooling lithium-ion batteries and using the generated heat in heating a residential unit10.1016/j.est.2022.104181 ↗
17. Air and PCM cooling for battery thermal management considering battery cycle life10.1016/j.applthermaleng.2020.115154 ↗
18. A novel battery thermal management system coupling with PCM and optimized controllable liquid cooling for different ambient temperatures10.1016/j.enconman.2019.112280 ↗
19. Thermal management of densely-packed EV battery with forced air cooling strategies10.1016/j.egypro.2016.06.098 ↗
20. Experimental study of the cooling effect of water mist on 18650 lithium-ion battery at different initial temperatures10.1016/j.psep.2021.10.034 ↗
21. Investigation of a water-NEPCM cooling thermal management system for cylindrical 18650 Li-ion batteries10.1016/j.energy.2021.122570 ↗
22. On-board monitoring of 2-D spatially-resolved temperatures in cylindrical lithium-ion batteries: Part II. State estimation via impedance-based temperature sensing10.1016/j.jpowsour.2016.06.104 ↗
23. On-board monitoring of 2-D spatially-resolved temperatures in cylindrical lithium-ion batteries: Part I. Low-order thermal modelling10.1016/j.jpowsour.2016.06.103 ↗
24. Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity10.1016/j.jpowsour.2011.02.076 ↗
25. Experimental investigation on thermal runaway propagation of 18,650 lithium-ion battery modules with two cathode materials at low pressure10.1016/j.energy.2022.123925 ↗
26. Method of liquid-cooled thermal control for a large-scale pouch lithium-ion battery10.1016/j.applthermaleng.2022.118417 ↗
27. Mini-channel liquid cooling system for large-sized lithium-ion battery packs by integrating step-allocated coolant scheme10.1016/j.applthermaleng.2022.118798 ↗
28. Liquid cooling vs hybrid cooling for fast charging lithium-ion batteries: a comparative numerical study10.1016/j.applthermaleng.2022.118226 ↗
29. Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack10.1016/j.ijthermalsci.2016.05.009 ↗
30. Numerical simulation of thermal behavior of lithium-ion secondary batteries using the enhanced single particle model10.1016/j.jpowsour.2013.11.111 ↗
31. Effect analysis on heat dissipation performance enhancement of a lithium-ion-battery pack with heat pipe for central and southern regions in China10.1016/j.energy.2021.120336 ↗
32. Evaluation of lithium battery thermal management using sealant made of boron nitride and silicone10.1016/j.jpowsour.2020.227820 ↗
33. Selection of thermal management system for modular battery packs of electric vehicles: a review of existing and emerging technologies10.1016/j.jpowsour.2018.08.020 ↗
34. Energy density of cylindrical Li-ion cells: a comparison of commercial 18650 to the 21700 cells10.1149/2.0281814jes ↗
35. Accurate determination of battery discharge characteristics – a comparison between two battery temperature control methods10.1016/j.jpowsour.2013.09.060 ↗
36. A review on thermal management of lithium-ion batteries for electric vehicles10.1016/j.energy.2021.121652 ↗
37. Investigation on thermal management performance of PCM-fin structure for Li-ion battery module in high-temperature environment10.1016/j.enconman.2018.09.025 ↗
38. Virtual prototyping approach to evaluate the thermal management of Li-ion batteries
39. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
40. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
41. Full-cycle electrochemical-thermal coupling analysis for commercial lithium-ion batteries10.1016/j.applthermaleng.2020.116258 ↗
42. Phrenic motoneuron discharge patterns following chronic cervical spinal cord injury10.1016/j.expneurol.2013.08.003 ↗
43. Bernardi · 1984
44. Heat‐generation rate and general energy balance for insertion battery systems10.1149/1.1837884 ↗
45. Simplified electrochemical lithium-ion battery model with variable solid-phase diffusion and parameter identification over wide temperature range10.1016/j.jpowsour.2021.229900 ↗
46. Polynomial approximation pseudo-two-dimensional battery model for online application in embedded battery management system10.1016/j.energy.2017.10.097 ↗
47. Electrochemical–thermal modeling of automotive Li-ion batteries and experimental validation using a three-electrode cell10.1002/er.1652 ↗
48. Solid-state diffusion limitations on pulse operation of a lithium ion cell for hybrid electric vehicles10.1016/j.jpowsour.2006.03.050 ↗
49. Solid-state diffusion limitations on pulse operation of a lithium ion cell for hybrid electric vehicles10.1016/j.jpowsour.2006.03.050 ↗
50. Modeling internal shorting process in large-format Li-ion cells10.1149/2.1031507jes ↗
51. Three-dimensional modeling of electrochemical performance and heat generation of spirally and prismatically wound lithium-ion batteries10.1149/2.023311jes ↗
52. Research on the thermal characteristics of an 18650 lithium-ion battery based on an electrochemical–thermal flow coupling model10.3390/wevj12040250 ↗
53. Temperature field evolution of cylindrical battery: in-situ visualizing experiments and high fidelity internal morphology simulations10.1016/j.jpowsour.2021.229910 ↗
54. A computationally efficient coupled electrochemical-thermal model for large format cylindrical lithium ion batteries10.1149/2.1241913jes ↗
55. Electrochemical thermal modeling and experimental measurements of 18650 cylindrical lithium-ion battery during discharge cycle for an EV10.1016/j.applthermaleng.2018.02.046 ↗
56. Thermal analyses of LiFePO4/graphite battery discharge processes10.1016/j.jpowsour.2013.05.089 ↗
57. Effect of parallel connection topology on air-cooled lithium-ion battery module: inconsistency analysis and comprehensive evaluation10.1016/j.apenergy.2022.118758 ↗