Effects of LiNi0.8Co0.15Al0.05O2 electrodes on the conduction mechanism of Sm0.2Ce0.8O2−δ electrolyte and performance of low-temperature solid oxide fuel cells
Source abstract
Abstract
In this study, three low-temperature solid oxide fuel cells are constructed using Ce 0.8Sm 0.2O 2−δ (SDC) as the electrolyte and Ni–LiNi 0.8Co 0.15Al 0.05O 2 (Ni–NCAL) and Ni–Ag as the electrodes. Cell A with symmetrical Ni–NCAL electrodes exhibits the best electrochemical performance. During operation, the Ni–NCAL anode is reduced by H 2 atmosphere to form LiOH and Li 2CO 3. The Li 2CO 3 –LiOH melt produced at >450 °C permeates the SDC electrolyte layer, causing its densification and grain growth in addition to the Li + -ion doping of SDC grains. The maximum electrical conductivity of the Li +-ion-doped SDC at 550 °C is at least one order of magnitude smaller than that of the SDC–Li 2CO 3–LiOH composite electrolyte (0.331 S cm −1). The ohmic and polarization resistances of Cell A at 550 °C are 0.168 and 0.256 Ω cm 2, respectively, and its open-circuit voltage is 1.065 V, indicating the presence of dense SDC electrolyte and electron-blocking layers . The maximum power density of the cell at 550 °C is 535.2 mW·cm −2 , which is primarily due to the high catalytic activity for the hydrogen oxidation and oxygen reduction reactions at the electrodes and large electrical conductivity of the SDC–Li 2CO 3–LiOH composite electrolyte at low temperatures.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Solid oxide fuel cell: decade of progress, future perspectives and challenges10.1016/j.ijhydene.2021.06.020 ↗
2. Low temperature solid oxide electrolytes (LT-SOE): a review10.1016/j.jpowsour.2016.11.019 ↗
3. Wachsman · Lowering Temp. Solid Oxide Fuel Cell. Sci. · 2011 · 334 · 935
4. Exploiting rare-earth-abundant layered perovskite cathodes of LnBa0.5Sr0.5Co1.5Fe0.5O5+δ (Ln=La and Nd) for10.1016/j.ijhydene.2020.11.031 ↗
5. A novel facile strategy to suppress Sr segregation for high-entropy stabilized La0.8Sr0.2MnO3-δ cathode10.1016/j.jpowsour.2020.228959 ↗
6. Variability and origins of grain boundary electric potential detected by electron holography and atom-probe tomography10.1038/s41563-020-0656-1 ↗
7. Role of nanostructures on SOFC performance at reduced temperatures10.1557/mrs.2014.193 ↗
8. Functional ceria-based nanocomposites for advanced low-temperature (300-600 °C) solid oxide fuel cell: a comprehensive review
9. A bulk-heterostructure nanocomposite electrolyte of Ce0.8Sm0.2O2-δ–SrTiO3 for low-temperature solid oxide fuel cells10.1007/s40820-020-00574-3 ↗
10. Proton transport enabled by a field-induced metallic state in a semiconductor heterostructure10.1126/science.aaz9139 ↗
11. Junction and energy band on novel semiconductor-based fuel cells10.1016/j.isci.2021.102191 ↗
12. PN heterostructure interface-facilitated proton conduction in 3C-SiC/Na0.6CoO2 electrolyte for fuel cell application10.1021/acsaem.1c01633 ↗
13. Enhanced Ionic conductivity and durability of novel solid oxide fuel cells by constructing a heterojunction based on transition and rare earth metal Co-doped ceria” ACS10.1021/acsaem.1c01873 ↗
14. High-performance NdSrCo2O5+δ–Ce0.8Gd0.2O2-δ composite cathodes for electrolyte-supported microtubular solid oxide fuel cells10.1016/j.ijhydene.2021.07.049 ↗
15. High-performance anode-supported solid oxide fuel cells with co-fired Sm0.2Ce0.8O2-δ/La0.8Sr0.2Ga0.8Mg0.2O3−δ/Sm0.2Ce0.8O2-δ sandwiched electrolyte10.1016/j.ijhydene.2021.11.132 ↗
16. The sintering temperature effect on electrochemical properties of Ce0.8Sm0.05Ca0.15O2-δ (SCDC)-La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) heterostructure pellet10.1186/s11671-019-2979-x ↗
17. Conductivity enhancement in carbonate-based composite electrolytes: an ongoing illusion Experimental Procedure10.1007/s11581-015-1616-7 ↗
18. Comments on “Enhanced ionic conductivity of yttria-stabilized ZrO2 with natural CuFe-oxide mineral heterogeneous composite for low temperature solid oxide fuel cells10.1016/j.ijhydene.2017.05.218 ↗
19. Interface engineering towards low temperature in-situ densification of SOFC10.1016/j.ijhydene.2020.01.193 ↗
20. Layer-structured LiNi0.8Co0.2O2: a new triple (H+/O-2/e-) conducting cathode for low temperature proton conducting solid oxide fuel cells10.1016/j.jpowsour.2015.12.015 ↗
21. Progress in electrolyte-free fuel cells10.3389/fenrg.2016.00017 ↗
22. Tuning the energy band structure at interfaces of the SrFe0.75Ti0.25O3−δ–Sm0.25Ce0.75O2−δ heterostructure for fast ionic transport10.1021/acsami.9b13044 ↗
23. Mechanism for major improvement in SOFC electrolyte conductivity when using lithium compounds as anode10.1021/acsaem.0c00364 ↗
24. Investigation of the sudden drop of electrolyte conductivity at low temperature in ceramic fuel cell with Ni0·8Co0·15Al0·05LiO2 electrode
25. A review of AC impedance modeling and validation in SOFC diagnosis10.1016/j.electacta.2007.05.071 ↗
26. Synergistic effect of lithium and calcium for low temperature densification and grain boundary scavenging doped ceria electrolyte10.1016/j.matchemphys.2019.121900 ↗
27. Investigation of layered Ni0.8Co0.15Al0.05LiO2 in electrode for low temperature solid oxide fuel cells10.1016/j.ijhydene.2017.11.056 ↗
28. Electrochemical study of lithiated transition metal oxide composite as symmetrical electrode for low temperature ceramic fuel cells10.1016/j.ijhydene.2013.06.050 ↗
29. Partially reduced Ni0.8Co0.15Al0.05LiO2-δ for low-temperature SOFC cathode10.1016/j.ijhydene.2020.05.150 ↗
30. Electrochemical open circuit voltage (OCV) characterization of SOFC materials10.1007/s11581-013-0843-z ↗
31. Solid oxide fuel cells 12 (SOFC–XII)
32. Ionic conductivity in Li5AlO4 and LiOH10.1016/0025-5408(77)90066-6 ↗
33. Toward understanding of temperature dependence of an advanced ceramic fuel cell with Ni0.8Co0.15Al0.05LiO2 as, an electrode10.1021/acsaem.1c01613 ↗
34. Effect of Li2CO3 and LiOH on the ionic conductivity of BaCe0.9Y0.1O3 electrolyte in SOFCs with a lithium compound electrode10.1016/j.ijhydene.2020.04.192 ↗
35. Chemical stability and compatibility of double perovskite anode materials for SOFCs10.1016/j.ssi.2013.03.005 ↗
36. Revised effective ionic radii and systematic studies of interatomie distances in halides and chaleogenides10.1107/S0567739476001551 ↗
37. Low temperature densification by lithium co-doping and its effect on ionic conductivity of samarium doped ceria electrolyte10.1016/j.ceramint.2018.11.251 ↗
38. A review of defect structure and chemistry in ceria and its solid solutions10.1039/C9CS00588A ↗
39. Role of trivalent La and Nd dopants in lattice distortion and oxygen vacancy generation in cerium oxide nanoparticles10.1063/1.2210795 ↗
40. The role of oxygen vacancies and their location in the magnetic properties of Ce1−xCuxO2−δ nanorods10.1039/C4CP04879B ↗
41. Gittleson · 2015 · vol. 2 · 1446
42. Unravelling the synergistic effect on ionic transport and sintering temperature of nanocrystalline CeO2 tri-doped with Li, Bi and Gd as dense electrolyte for solid oxide fuel cells10.1016/j.jallcom.2021.162880 ↗
43. Lithium carbon as solid electrolyte
44. Novel proton conductors in the layered oxide material LixAl0.5Co0.5O210.1002/aenm.201301683 ↗
45. Proton transfer in molten lithium carbon: mechanism and kinetics by density functional theory calculations10.1038/s41598-017-07726-3 ↗