journal article·2022-05

Performance and design optimization of different numbers and bolt torque for air-cooled open-cathode proton exchange membrane fuel cells

Chen Zhao, Baozhu Li, Shuang Xing, Ruichao Wei, Heran Song, Haijiang Wang

Publisher page

Abstract

Air-cooled open-cathode polymer electrolyte fuel cells have attracted increasing attention in the field of portable energy equipment. This study explores the influence of the number of single cells, and bolt torque on stack performance based on the measurements of polarization curves, the single-cell voltage, and temperature distribution . The stack bolt torque and the number of single cells present a linear relationship and should be reasonably matched to improve the stack performance. Remarkably, the more cells, the greater bolt torque is required to achieve better stack performance. The results show that the optimal range of the number of single cells for the air-cooled open-cathode polymer electrolyte fuel cells is 20–25. When the cell number increases to 32–40, stack operating temperature exceeds the optimal range, thus reducing the output power and mass power density. A novel modularized design for the stack with the optimal number of single cells is firstly proposed which effectively improves the thermal management and power performance index of the stack. The work conducted could provide the reference and guidance for the stack design and accelerate the application of air-cooled open-cathode fuel cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Core–shell-structured low-platinum electrocatalysts for fuel cell applications10.1007/s41918-018-0013-0 ↗
2. Modeling of PEM fuel cell catalyst layers: status and outlook10.1007/s41918-019-00043-5 ↗
3. An overview of fuel cell technology: fundamentals and applications10.1016/j.rser.2014.01.012 ↗
4. Prospects of different fuel cell technologies for vehicle applications10.1016/S0378-7753(02)00029-0 ↗
5. Tools for designing the cooling system of a proton exchange membrane fuel cell10.1016/j.applthermaleng.2012.02.008 ↗
6. Numerical investigation of innovative 3D cathode flow channel in proton exchange membrane fuel cell10.1002/er.4086 ↗
7. Numerical investigation on the characteristics of mass transport and performance of PEMFC with baffle plates installed in the flow channel10.1016/j.ijhydene.2018.03.037 ↗
8. Carlstrom · 2001
9. Experimental study of clamping effects on the performances of a single proton exchange membrane fuel cell and a 10-cell stack10.1016/j.jpowsour.2009.03.058 ↗
10. An experimental analysis of PEMFC stack assembly using strain gage sensors10.1016/j.ijhydene.2014.01.033 ↗
11. Influence of the bolt torque on PEFC performance with different gasket materials10.1016/j.ijhydene.2011.07.066 ↗
12. Effects of assembly torque on a proton exchange membrane fuel cell with stamped metallic bipolar plates10.1016/j.energy.2018.06.168 ↗
13. Composite endplates with pre-curvature for PEMFC (polymer electrolyte membrane fuel cell)10.1016/j.compstruct.2009.10.023 ↗
14. Stresses and their impacts on proton exchange membrane fuel cells: a review10.1016/j.ijhydene.2017.12.033 ↗
15. Investigation of contact pressure distribution over the active area of PEM fuel cell stack10.1016/j.ijhydene.2015.12.057 ↗
16. Effect of clamping pressure on liquid-cooled PEMFC stack performance considering inhomogeneous gas diffusion layer compression10.1016/j.apenergy.2019.114073 ↗
17. Effects of assembly pressure on PEM fuel cell performance by taking into accounts electrical and thermal contact resistances10.1016/j.energy.2019.05.031 ↗
18. A systematic review for structure optimization and clamping load design of large proton exchange membrane fuel cell stack
19. Effects of mechanical compression on the performance of polymer electrolyte fuel cells and analysis through in-situ characterisation techniques - a review10.1016/j.jpowsour.2019.03.071 ↗
20. Impacts of inhomogeneous clamping force on local performance and liquid water formation in polymer electrolyte fuel cells10.1016/j.ijhydene.2017.06.139 ↗
21. 3D numerical investigation of clamping pressure effect on the performance of proton exchange membrane fuel cell with interdigitated flow field10.1016/j.energy.2017.10.020 ↗
22. A high efficient assembly technique for large PEMFC stacks: Part I. Theory10.1016/j.jpowsour.2009.04.068 ↗
23. Effect of GDL permeability on water and thermal management in PEMFCs—II. Clamping force10.1016/j.ijhydene.2008.04.023 ↗
24. Effects of clamping force on the water transport and performance of a PEM (proton electrolyte membrane) fuel cell with relative humidity and current density10.1016/j.energy.2015.10.045 ↗
25. Optimization of contact resistance with better gasketing for a unitized regenerative fuel cell10.1016/j.ijhydene.2018.09.090 ↗
26. An experimental study on pressure distribution and performance of end-plate with different optimization parameters for air-cooled open-cathode LT-PEMFC10.1016/j.ijhydene.2020.04.270 ↗
27. Effects of bolt torque and gasket geometric parameters on open-cathode polymer electrolyte fuel cells10.1016/j.apenergy.2021.117632 ↗
28. A numerical investigation of the effects of compression force on PEM fuel cell performance10.1016/j.jpowsour.2008.04.060 ↗
29. A study of the effect of compression on the performance of polymer electrolyte fuel cells using electrochemical impedance spectroscopy and dimensional change analysis10.1016/j.ijhydene.2013.04.021 ↗
30. Effect of nonuniformity of the contact pressure distribution on the electrical contact resistance in proton exchange membrane fuel cells10.1016/j.ijhydene.2011.01.080 ↗
31. Experimental and numerical studies of portable PEMFC stack10.1016/j.electacta.2008.11.008 ↗
32. Numerical analysis of air-cooled proton exchange membrane fuel cells with various cathode flow channels
33. Parametric study of passive air-cooled polymer electrolyte membrane fuel cell stacks10.1016/j.ijheatmasstransfer.2020.119886 ↗
34. Experimental investigation of the thermal response of open-cathode proton exchange membrane fuel cell stack10.1016/j.ijhydene.2018.05.097 ↗
35. Experimental study on temperature characteristics of an air-cooled proton exchange membrane fuel cell stack10.1016/j.renene.2019.05.085 ↗