Optimization preparation of composite membranes as proton exchange membrane for gaseous acetone fed microbial fuel cells
Source abstract
Abstract
Abstract To synthesize a proton exchange membrane (PEM) with both low oxygen diffusivity and high proton conductivity (PC) for applications in microbial fuel cells (MFC), we produce composite membranes using different polyvinyl alcohol (PVA) and conductive carbon black (CCB) ratios. The CCB and PVA preparation ratios are used as the independent variables and oxygen diffusivity and PC as the response variables to calculate the optimal PEM by response surface methodology. The correlation coefficients of the experimental and predicted values for oxygen diffusivity and PC are all greater than 0.99. The optimum concentration of PVA and CCB is 10.04 % and 0.82 m3 g−1, respectively, with 62.9 % desirability. The oxygen diffusivity and PC of the modified PEM are better than those of the unmodified PEM. In particular, PC is increased by 20-fold. Applying the modified PEM to a biotrickling filter-MFC (BTF-MFC) improves removal efficiency of gaseous acetone to >97 %. To enhance BTF-MFC performance, we design a mode where the exhaust gas flowed from cathode to anode. We find that this mode not only provides the cathode with sufficient oxygen to facilitate reduction but also reduces the oxygen content in the anode tank.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microbial Fuel Cells and Bioremediation · Fuel Cells and Related Materials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Long-term performance of a 20-L continuous flow microbial fuel cell for treatment of brewery wastewater10.1016/j.jpowsour.2017.03.132 ↗
2. Long-term effect of biochar amendment on the biodegradation of petroleum hydrocarbons in soil microbial fuel cells10.1016/j.scitotenv.2018.09.098 ↗
3. Copper removal and microbial community analysis in single-chamber microbial fuel cell10.1016/j.biortech.2018.01.046 ↗
4. Bioremediation of wastewater through a quorum sensing triggered MFC: a sustainable measure for waste to energy concept10.1016/j.jenvman.2019.01.075 ↗
5. Combination of bioelectrochemical systems and electrochemical capacitors: principles, analysis and opportunities10.1016/j.biotechadv.2019.107456 ↗
6. Microbial fuel cells: from fundamentals to applications. A review10.1016/j.jpowsour.2017.03.109 ↗
7. A critical review on recent proton exchange membranes applied in microbial fuel cells for renewable energy recovery10.1016/j.jclepro.2020.121446 ↗
8. Biofouling of membranes in microbial electrochemical technologies: causes, characterization methods and mitigation strategies10.1016/j.biortech.2019.02.001 ↗
9. Stabilized heteropolyacid/Nafion® composite membranes for elevated temperature/low relative humidity PEFC operation10.1016/j.electacta.2004.08.015 ↗
10. Recent advances in the separators for microbial fuel cells10.1016/j.biortech.2010.03.090 ↗
11. A review into the use of ceramics in microbial fuel cells10.1016/j.biortech.2016.03.135 ↗
12. Integrating microbial fuel cells with anaerobic acidification and forward osmosis membrane for enhancing bio-electricity and water recovery from low-strength wastewater10.1016/j.watres.2016.12.012 ↗
13. Simultaneous wastewater treatment and electricity generation by microbial fuel cell: performance comparison and cost investigation of using Nafion 117 and SPEEK as separators10.1016/j.desal.2013.06.013 ↗
14. Synthesis of PVDF-g-PSSA proton exchange membrane by ozone-induced graft copolymerization and its application in microbial fuel cells10.1016/j.memsci.2016.12.065 ↗
15. A novel low cost polyvinyl alcohol-Nafion-borosilicate membrane separator for microbial fuel cell10.1016/j.matchemphys.2016.07.008 ↗
16. Investigation of a cation exchange membrane comprising sulphonated poly ether ether ketone and sulphonated titanium nanotubes in microbial fuel cell and preliminary insights on microbial adhesion10.1016/j.cej.2020.125558 ↗
17. Hassan · 2000 · 37
18. Enhancement of bioelectricity generation for an air-cathode microbial fuel cell using polyvinyl alcohol-membrane electrode assemblies10.1016/j.bej.2017.10.003 ↗
19. Crosslinked poly(vinyl alcohol) membrane as separator for domestic wastewater fed dual chambered microbial fuel cells10.1016/j.ijhydene.2020.11.213 ↗
20. Novel PVA/Methoxytrimethylsilane elastic composite membranes: preparation, characterization and DFT computation10.1016/j.molstruc.2021.130173 ↗
21. Preparation of sulfonated zeolite ZSM-5/sulfonated polysulfone composite membranes as PEM for direct methanol fuel cell application10.1016/j.ssi.2018.02.019 ↗
22. Improving the performances of Nafion™-based membranes for microbial fuel cells with silica-based, organically-functionalized mesostructured fillers10.1016/j.jpowsour.2016.10.014 ↗
23. Modifying proton exchange membrane in a microbial fuel cell by adding clay mineral to improve electricity generation without reducing removal of toluene10.1016/j.bej.2018.03.013 ↗
24. Observation of mechanical percolation in functionalized graphene oxide/elastomer composites10.1016/j.carbon.2012.05.029 ↗
25. Protonic conductivity and thermal properties of cross-linked PVA/TiO2 nanocomposite polymer membranes10.1016/j.jnoncrysol.2019.119520 ↗
26. Synthesis and characterization of bisulfonated poly(vinyl alcohol)/graphene oxide composite membranes with improved proton exchange capabilities10.1016/j.polymertesting.2020.106752 ↗
27. Graphene oxide: a promising membrane material for fuel cells10.1016/j.rser.2017.09.081 ↗
28. Fabrication and characterization of poly (vinyl alcohol) – graphene nanoplatelets (GNPs) proton exchange membrane for direct methanol fuel cells
29. Electrical conductivity of conductive carbon blacks: influence of surface chemistry and topology10.1016/S0169-4332(03)00550-6 ↗
30. Modifying membrane anode in a microbial fuel cell to improve removal of gaseous ethyl acetate without reducing generation of electricity10.1016/j.jtice.2016.02.001 ↗
31. Crosslinked sulfonated poly(vinyl alcohol)/graphene oxide electrospun nanofibers as polyelectrolytes10.3390/nano9030397 ↗
32. Crosslinked sulfonated poly(vinyl alcohol)/sulfonated multi-walled carbon nanotubes nanocomposite membranes for direct methanol fuel cells10.1016/j.memsci.2011.07.010 ↗
33. Myers · 2016
34. Response surface methodology (RSM) as a tool for optimization in analytical chemistry10.1016/j.talanta.2008.05.019 ↗
35. Optimization of process parameters using response surface methodology (RSM) for power generation via electrooxidation of glycerol in T-Shaped air breathing microfluidic fuel cell (MFC)10.1016/j.ijhydene.2020.09.023 ↗
36. Towards the optimisation of ceramic-based microbial fuel cells: a three-factor three-level response surface analysis design10.1016/j.bej.2019.01.015 ↗
37. Statistical optimization of process parameters in microbial fuel cell for enhanced power production using Sulphonated Polyhedral Oligomeric Silsesquioxane dispersed Sulphonated Polystyrene Ethylene Butylene Polystyrene nanocomposite membranes10.1016/j.jpowsour.2020.228400 ↗
38. Synthesis, characterization and application of S-TiO2/PVDF-g-PSSA composite membrane for improved performance in MFCs10.1016/j.fuel.2019.116847 ↗
39. Enhancement of power generation by microbial fuel cells in treating toluene-contaminated groundwater: developments of composite anodes with various compositions10.1016/j.apenergy.2018.10.105 ↗
40. Structural organization of poly(vinyl alcohol) hydrogels obtained by freezing and thawing Techniques: A SANS study10.1021/cm048632y ↗
41. Montgomery · 2017
42. Theodor von Grotthuss' contribution to electrochemistry10.1016/j.electacta.2017.03.128 ↗
43. The effect of ferric ions on the conductivity of various types of polymer cation exchange membranes10.1007/s10008-007-0306-4 ↗
44. Enhanced gaseous ethyl acetate degradation and power generation by a bioelectrochemical system10.1016/j.cej.2018.03.093 ↗
45. Microbial fuel cell performance of graphitic carbon functionalized porous polysiloxane based ceramic membranes10.1016/j.bioelechem.2019.06.002 ↗
46. Proton conducting poly(vinyl alcohol) (PVA)/poly(2-acrylamido-2-methylpropane sulfonic acid) (PAMPS)/zeolitic imidazolate framework (ZIF) ternary composite membrane10.1016/j.memsci.2015.10.032 ↗
47. Kinetic studies of the degradation of poly(vinyl alcohol)-based proton-conducting membranes at low temperatures10.1016/j.tca.2011.04.016 ↗
48. Dielectric relaxations and conductivity of cross-linked PVA/SSA/GO composite membranes for fuel cells10.1016/j.polymertesting.2018.01.024 ↗
49. Insight from perfectly selective and ultrafast proton transport through anhydrous asymmetrical graphene oxide membranes under Grotthuss mechanism10.1016/j.memsci.2020.118735 ↗
50. Addition of reduced graphene oxide to an activated-carbon cathode increases electrical power generation of a microbial fuel cell by enhancing cathodic performance10.1016/j.electacta.2018.12.024 ↗
51. Sulfonated poly(ether ether ketone)/poly(ether sulfone) composite membranes as an alternative proton exchange membrane in microbial fuel cells10.1016/j.ijhydene.2012.04.155 ↗
52. Preparation of ion exchange membranes for fuel cell based on crosslinked poly(vinyl alcohol) with poly(styrene sulfonic acid-co-maleic acid)10.1016/j.memsci.2006.03.025 ↗
53. Nanohybrids of graphene oxide chemically-bonded with Nafion: preparation and application for proton exchange membrane fuel cells10.1016/j.memsci.2016.04.062 ↗
54. Continuous production of power using microbial fuel cells with integrated biotrickling filter for ethyl acetate-contaminated air stream treatment10.1016/j.ijhydene.2016.08.186 ↗
55. Acid catalysed cross-linking of poly vinyl alcohol (PVA) by glutaraldehyde: effect of crosslink density on the characteristics of PVA membranes used in single chambered microbial fuel cells10.1039/C5RA16068E ↗
56. Novel low cost proton exchange membrane made from sulphonated biochar for application in microbial fuel cells10.1016/j.matchemphys.2019.122025 ↗
57. Increased power generation from a new sandwich-type microbial fuel cell (ST-MFC) with a membrane-aerated cathode10.1016/j.biombioe.2020.105781 ↗
58. Current advances of VOCs degradation by bioelectrochemical systems: a review10.1016/j.cej.2017.11.014 ↗