Enhanced mass transfer and proton conduction of cathode catalyst layer for proton exchange membrane fuel cell through filling polyhedral oligomeric silsesquioxane
Source abstract
Abstract
Abstract Mass transfer and charge conduction are vital to proton exchange membrane fuel cell (PEMFC). A series of novel cathode catalyst layer (CCL) with various contents of hydrophobic and cage-structured polyhedral oligomeric silsesquioxane (POSS) is prepared. Compared with the common CCL, additional 15% POSS in CCL can increase 30.3% power density and achieve the maximum value of 965.2 mW cm−2 at 80% relative humidity (RH). Correspondingly, the Warburg admittance representing mass transfer increases by 2 times, and proton transfer resistance reduces 32.2%. Besides, the voltage drop of the optimized CCL with POSS at 1800 mA cm−2 is voided, though the voltage of pure CCL drops by 21 mV, as RH increases from 50% to 80%. We propose that the hydrophobic branches of POSS facilitate water to leave secondary pores. Moreover, the hydrophilic inner core of POSS can trap water and induce sulfonic acid group aggregation by hydrogen-bonding, which contributes to proton transfer through proton hopping mechanism. POSS-modified CCL exceedingly improves the reliability and performance to operate at a wide range of current density and RH conditions. We provide an available strategy to address the trade-off between proton conduction and mass transfer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Enhancing proton exchange membrane fuel cell performance via graphene oxide surface synergy10.1016/j.apenergy.2019.114277 ↗
2. Towards high-efficiency nanoelectrocatalysts for oxygen reduction through engineering advanced carbon nanomaterials10.1039/C5CS00414D ↗
3. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
4. Electrode for proton exchange membrane fuel cells: a review10.1016/j.rser.2018.03.007 ↗
5. Insight into the correlation of Pt-support interactions with electrocatalytic activity and durability in fuel cells10.1039/D0TA01530J ↗
6. Highly efficient nonprecious metal catalysts towards oxygen reduction reaction based on three-dimensional porous carbon nanostructures10.1039/C5CS00670H ↗
7. Development of highly stable and mass transfer-enhanced cathode catalysts: support-free electrospun intermetallic FePt nanotubes for polymer electrolyte membrane fuel cells10.1002/aenm.201402093 ↗
8. An overview of polymer electrolyte membrane electrolyzer for hydrogen production: modeling and mass transport10.1016/j.jpowsour.2016.01.012 ↗
9. Analysis and modeling of PEMFC degradation: effect on oxygen transport10.1016/j.jpowsour.2012.04.069 ↗
10. Effect of hydrophobic additive on oxygen transport in catalyst layer of proton exchange membrane fuel cells10.1016/j.jpowsour.2018.01.068 ↗
11. Post-synthetic modification of porous materials: superprotonic conductivities and membrane applications in fuel cells10.1039/D0TA01733G ↗
12. Degradation aspects of water formation and transport in proton exchange membrane fuel cell: a review10.1016/j.jpowsour.2013.04.044 ↗
13. Effects of an MPL on water and thermal management in a PEMFC10.1002/er.4262 ↗
14. Water transport in polymer electrolyte membrane fuel cells10.1016/j.pecs.2010.06.002 ↗
15. A novel experimental based statistical study for water management in proton exchange membrane fuel cells10.1016/j.apenergy.2020.114713 ↗
16. Novel approach to determine cathode two-phase-flow pressure drop of proton exchange membrane fuel cell and its application on water management10.1016/j.apenergy.2017.01.010 ↗
17. Optimized microporous layer for improving polymer exchange membrane fuel cell performance using orthogonal test design10.1016/j.apenergy.2019.113714 ↗
18. Effect of operational parameters on transport and performance of a PEM fuel cell with the best protrusive gas diffusion layer arrangement10.1016/j.apenergy.2018.03.030 ↗
19. Enhanced water management in the cathode of an air-breathing PEMFC using a dual catalyst layer and optimizing the gas diffusion and microporous layers10.1016/j.ijhydene.2015.01.091 ↗
20. Vertically aligned carbon nanotube electrodes for high current density operating proton exchange membrane fuel cells10.1016/j.jpowsour.2013.11.073 ↗
21. Effect of through-plane polytetrafluoroethylene distribution in gas diffusion layers on performance of proton exchange membrane fuel cells10.1016/j.jpowsour.2015.12.020 ↗
22. Effect of tunable hydrophobic level in the gas diffusion substrate and microporous layer on anion exchange membrane fuel cells10.1016/j.jpowsour.2018.09.053 ↗
23. Influence of PTFE on water transport in gas diffusion layer of polymer electrolyte membrane fuel cell10.20964/2018.04.53 ↗
24. A review of gas diffusion layer in PEM fuel cells: materials and designs10.1016/j.ijhydene.2011.12.148 ↗
25. Experimental study on the membrane electrode assembly of a proton exchange membrane fuel cell: effects of microporous layer, membrane thickness and gas diffusion layer hydrophobic treatment10.1016/j.electacta.2016.12.074 ↗
26. An ultra-thin, flexible, low-cost and scalable gas diffusion layer composed of carbon nanotubes for high-performance fuel cells10.1039/C9TA13944C ↗
27. Effective factors improving catalyst layers of PEM fuel cell10.1016/j.ijhydene.2017.12.055 ↗
28. Optimization of the microstructure of the cathode catalyst layer of a PEMFC for two-phase flow10.1149/1.3264628 ↗
29. Optimized catalyst layer structure for PEM fuel cells10.1149/1.2214520 ↗
30. Influence of FEP nanoparticles in catalyst layer on water management and performance of PEM fuel cell with high Pt loading10.1016/j.ijhydene.2016.11.037 ↗
31. Effects of hydrophobicity of the cathode catalyst layer on the performance of a PEM fuel cell10.1016/j.electacta.2009.12.048 ↗
32. PEMFC catalyst layer modification with the addition of different amounts of PDMS polymer in order to improve water management10.1002/er.4704 ↗
33. Advanced functional materials based on polyhedral oligomeric silsesquioxane (POSS)10.1039/C1JM14231C ↗
34. Polyhedral oligosilsesquioxane tethered perylene diimide for application in optical limiting and rapid detection of fluoride ions10.1039/C8CC09725A ↗
35. Facile synthesis and self-assembly of amphiphilic polyether-octafunctionalized polyhedral oligomeric silsesquioxane via thiol-ene click reaction10.3390/polym9070251 ↗
36. POSS-functionalized graphene oxide hybrids with improved dispersive and smoke-suppressive properties for epoxy flame-retardant application10.1016/j.eurpolymj.2019.109383 ↗
37. Fluorinated polyhedral oligomeric silsesquioxanes (F-POSS)10.1002/anie.200705355 ↗
38. Morphology, dynamics, and order development in a thermoplastic polyurethane with melt blended POSS10.1002/polb.24868 ↗
39. Fabrication of superhydrophobic cotton fabrics by grafting of POSS-based polymers on fibers10.1016/j.apsusc.2018.09.156 ↗
40. Recent developments in the chemistry of cubic polyhedral oligosilsesquioxanes10.1021/cr900201r ↗
41. Mixed matrix proton exchange membranes for fuel cells: state of the art and perspectives10.1016/j.progpolymsci.2015.11.004 ↗
42. Preparation and characterization of Nafion/sPOSS polyelectrolyte nanocomposite membranes for direct methanol fuel cell applications10.1016/j.jiec.2011.02.024 ↗
43. Progression from polyimide to polyimide composite in proton-exchange membrane fuel cell: a review10.1080/03602559.2016.1275688 ↗
44. Sulfonated poly(etheretherketone) based nanocomposite membranes containing POSS-SA for polymer electrolyte membrane fuel cells (PEMFC)10.1016/j.memsci.2018.08.040 ↗
45. Polydopamine-modified sulfonated polyhedral oligomeric silsesquioxane: an appealing nanofiller to address the trade-off between conductivity and stabilities for proton exchange membrane10.1016/j.memsci.2019.117734 ↗
46. Highly stable membranes of poly(phenylene sulfide benzimidazole) cross-linked with polyhedral oligomeric silsesquioxanes for high-temperature proton transport10.1021/acsaem.0c01285 ↗
47. In situ synthesis of star copolymers consisting of a polyhedral oligomeric silsesquioxane core and poly(2,5-benzimidazole) arms for high-temperature proton exchange membrane fuel cells10.1002/er.5571 ↗
48. Design of stable and durable polymer electrolyte membrane fuel cells by embedding hydrophobic cage-structured material in cell components10.1016/j.fuel.2018.08.051 ↗
49. Analysis of oxygen-transport diffusion resistance in proton-exchange-membrane fuel cells10.1149/1.3546038 ↗
50. Synergistically improving the activity, antipoisonous ability, and long-term stability of Pt to methanol oxidation through developing favorable graphene-based supports10.1021/acs.langmuir.6b03733 ↗
51. Linear sulfonated polyimides containing polyhedral oligomeric silsesquioxane (POSS) in main chain for proton exchange membranes10.1016/j.jpowsour.2015.04.174 ↗
52. Recent progress in the use of electrochemical impedance spectroscopy for the measurement, monitoring, diagnosis and optimization of proton exchange membrane fuel cell performance10.1016/j.jpowsour.2020.228361 ↗
53. Nafion/sPOSS hybrid membranes for PEMFC. Single cell performance and electrochemical characterization at different humidity conditions10.1016/j.ijhydene.2013.12.008 ↗
54. Theory of impedance response of porous electrodes: simplifications, inhomogeneities, non-stationarities and applications10.1149/2.0901609jes ↗
55. Quantitative analysis effect of the cathode catalyst layer with various ionomer ratio on PEMFC by protonic resistance10.1149/08907.0023ecst ↗
56. On the micro-, meso- and macroporous structures of polymer electrolyte membrane fuel cell catalyst layers10.1021/am900600y ↗
57. On the water transport behavior and phase transition mechanisms in cold start operation of PEM fuel cell10.1016/j.apenergy.2018.10.068 ↗
58. Analysis of water adsorption and condensation in catalyst layers for polymer electrolyte fuel cells10.1016/j.electacta.2014.07.058 ↗
59. Proton conductivity: materials and applications10.1021/cm950192a ↗
60. Modification of Nafion membrane with biofunctional SiO2 nanofiber for proton exchange membrane fuel cells10.1016/j.jpowsour.2016.11.072 ↗
61. Energy efficiency improvements by investigating the water flooding management on proton exchange membrane fuel cell (PEMFC)10.1016/j.energy.2019.04.074 ↗