journal article·2020-12Open access

A simplified electrochemical model for modelling Li-ion batteries comprising blend and bidispersed electrodes for high power applications

Martin Petit, Elisa Calas, Julien Bernard

Abstract

Abstract A fast computing electrochemical model has been developed in order to account for the electrothermal behavior of Li-ion batteries with multiple and/or multidispersed active materials in each electrode. In this study, the cell studied is a high power cell with lithium manganese spinel and lithium cobalt oxide at the positive and Lithium titanate at the negative with 2 particle populations. The model has been calibrated on the said cell and validated on realistic duty profile. It has been then compared against a state-of-the-art Newmann model that showed similar results for both global and inner behavior. However, due to the simplifications adopted for our modelling approach, calculation times of the newly developed model are significantly lower allowing to specific use where fast computing modelling approaches are required. Finally, this model has been used in order to understand the inner behavior of each electrode during constant current charge and discharges as well as hybrid electric vehicle duty cycles and further calculations have been performed to understand the impact of active material repartition in each electrode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. A review of blended cathode materials for use in Li-ion batteries10.1016/j.jpowsour.2013.09.052 ↗
2. Experiments on and modeling of positive electrodes with multiple active materials for lithium-ion batteries10.1149/1.3129656 ↗
3. Optimization of Graphite–SiO blend electrodes for lithium-ion batteries: stable cycling enabled by single-walled carbon nanotube conductive additive10.1016/j.jpowsour.2020.227711 ↗
4. Investigations on the effective electric loads in blended insertion electrodes for lithium‐ion batteries10.1002/celc.201901554 ↗
5. Internal dynamics of blended Li-insertion electrodes10.1016/j.est.2018.09.003 ↗
6. Li-ion thermal issues and modeling in nominal and extreme operating conditions for HEV/PHEV's
7. Impedance of constant phase element (CPE)-blocked diffusion in film electrodes10.1016/S0022-0728(98)00115-6 ↗
8. Controls-oriented models of lithium-ion cells having blend electrodes. Part 1: equivalent circuits10.1016/j.est.2017.02.004 ↗
9. Controls-oriented models of lithium-ion cells having blend electrodes. Part 2: physics-based reduced-order models10.1016/j.est.2017.02.006 ↗
10. Porous-electrode theory with battery applications10.1002/aic.690210103 ↗
11. Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles10.1016/j.jpowsour.2006.01.038 ↗
12. Including double-layer capacitance in lithium-ion battery mathematical models10.1016/j.jpowsour.2013.11.044 ↗
13. Modeling of a commercial graphite/LiFePO(4) cell10.1149/1.3567007 ↗
14. Modeling of lithium plating induced aging of lithium-ion batteries: transition from linear to nonlinear aging10.1016/j.jpowsour.2017.05.110 ↗
15. A simplified electrochemical and thermal aging model of LiFePO4-graphite Li-ion batteries: power and capacity fade simulations10.1149/2.053304jes ↗
16. Simulation-based analysis of aging phenomena in a commercial graphite/LiFePO(4) cell10.1149/2.103112jes ↗
17. Parameter sensitivity analysis of a simplified electrochemical and thermal model for Li-ion batteries aging10.1016/j.jpowsour.2016.06.030 ↗
18. Lithium-ion battery state of charge and critical surface charge estimation using an electrochemical model-based extended kalman filter
19. Simplified electrochemical and thermal model of LiFePO4-graphite Li-ion batteries for fast charge applications10.1149/2.064209jes ↗
20. Multi-particle model for a commercial blended lithium-ion electrode10.1149/2.0321603jes ↗
21. Dynamics of a blended lithium-ion battery electrode during galvanostatic intermittent titration Technique10.1016/j.electacta.2016.11.169 ↗
22. Modeling and experimental validation of a high-power lithium-ion pouch cell with LCO/NCA blend cathode10.1149/2.0301913jes ↗
23. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
24. Challenges in modeling high power lithium titanate oxide cells in battery management systems10.1016/j.est.2019.101189 ↗
25. EiG
26. FreedomCAR Program Electrochemical Energy Storage Team · 2003
27. Siemens Digital Industry Software
28. Single-particle model for a lithium-ion cell: thermal behavior10.1149/1.3521314 ↗
29. Capacity fade model for spinel LiMn 2 O 4 electrode10.1149/2.026302jes ↗
30. Thermal properties of Li4/3Ti5/3O4/LiMn2O4 cell10.1016/j.jpowsour.2007.06.199 ↗
31. Transport properties of LiPF[sub 6]-based Li-ion battery electrolytes10.1149/1.1872737 ↗
32. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
33. Nano-particle size effect on the performance of Li 4 Ti 5 O 12 spinel10.1016/j.electacta.2016.02.153 ↗