journal article·2019-11Open access

Effective yttrium based coating for steel interconnects of solid oxide cells: Corrosion evaluation in steam-hydrogen atmosphere

S. Molin, Å.H. Persson, T.L. Skafte, A.L. Smitshuysen, S.H. Jensen, K.B. Andersen, H. Xu, M. Chen, P.V. Hendriksen

Abstract

This work describes manufacture, analysis and test of a new well conducting corrosion-protection coating that can be applied on steel types with high chromium content. Electrolytic deposition of yttrium salts is used to form thin (<100 nm) coatings on both flat steel sheets (material: Crofer 22 APU) and its properties are proven on woven wire-meshes (materials from two different sources: SUS316 and SUS316L). The oxide scale on the coated Crofer 22 APU sheet remains intact after 2000 h operation at 750 °C in H 2 with 90% H 2 O. The corrosion rate at 750 °C of the coated Crofer 22 APU sheets is compared with that of uncoated samples and of samples with a commercial magneton sputtered CGO coating revealing that the coatings reduce the parabolic rate constant characteristic of the corrosion by a factor of 10 and 20 for the CGO and the Y, respectively. The coated meshes also exhibit high corrosion resistance and long-term-stable low electrical resistance at 650 °C, both in 90% H 2O in H 2, and in air. In addition to the experimental work, Y–Cr–O 2 phase diagrams are constructed illustrating the high stability of the YCrO 3 phase (that forms during corrosion) over a wide temperature and pO 2 range.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects10.1016/j.jpowsour.2009.09.069 ↗
2. Interconnect materials for next-generation solid oxide fuel cells10.1007/s10800-008-9743-8 ↗
3. Study on component interface evolution of a solid oxide fuel cell stack after long term operation10.1016/j.jpowsour.2018.03.040 ↗
4. Oxidation behavior of metallic interconnect in solid oxide fuel cell stack10.1016/j.jpowsour.2017.03.092 ↗
5. Degradation of ferritic stainless steels under conditions used for solid oxide fuel cells and electrolyzers at varying oxygen pressures10.1016/j.corsci.2016.04.030 ↗
6. Oxidation study of coated Crofer 22 APU steel in dry oxygen10.1016/j.jpowsour.2013.09.100 ↗
7. Corrosion stability of ferritic stainless steels for solid oxide electrolyser cell interconnects10.1016/j.corsci.2010.06.006 ↗
8. Metallic interconnects for solid oxide fuel cells10.1016/j.msea.2005.02.047 ↗
9. The oxidation behaviour of metals and alloys at high temperatures in atmospheres containing water vapour: a review10.1016/j.pmatsci.2007.11.001 ↗
10. MnCo1.9Fe0.1O4 spinel protection layer on commercial ferritic steels for interconnect applications in solid oxide fuel cells10.1016/j.jpowsour.2008.05.081 ↗
11. Effect of coating density on oxidation resistance and Cr vaporization from solid oxide fuel cell interconnects10.1016/j.jpowsour.2017.04.023 ↗
12. Self-healing atmospheric plasma sprayed Mn1.0Co1.9Fe0.1O4 protective interconnector coatings for solid oxide fuel cells10.1016/j.jpowsour.2017.07.072 ↗
13. Low temperature processed MnCo2O4 and MnCo1.8Fe0.2O4 as effective protective coatings for solid oxide fuel cell interconnects at 750 °C10.1016/j.jpowsour.2016.11.011 ↗
14. Interaction mechanisms between slurry coatings and solid oxide fuel cell interconnect alloys during high temperature oxidation10.1016/j.jallcom.2011.12.095 ↗
15. Coated stainless steel 441 as interconnect material for solid oxide fuel cells: evolution of electrical properties10.1016/j.jpowsour.2015.03.029 ↗
16. What did we learn on the reactive element effect in chromia scale since Pfeil ’s patent?10.1002/maco.201307310 ↗
17. Yttrium implantation effect on 304L stainless steel high temperature oxidation at 1000°C10.1023/A:1019667825476 ↗
18. Effect of reactive element oxide coating on the high temperature oxidation behaviour of FeCrAl alloys10.1016/j.apsusc.2004.01.072 ↗
19. Yttrium sol-gel coating effects on the cyclic oxidation behaviour of 304 stainless steel10.1016/S0010-938X(03)00114-8 ↗
20. Metallic interconnects for SOFC: characterisation of corrosion resistance and conductivity evaluation at operating temperature of differently coated alloys10.1016/j.jpowsour.2007.06.255 ↗
21. Improving the oxidation resistance and electrical properties of ferritic stainless steels for application in SOFC interconnects10.1007/s11085-015-9605-9 ↗
22. Improving the physicochemical properties of Fe–25Cr ferritic steel for SOFC interconnects via Y-implantation and Y2O3-deposition10.1007/s11085-012-9345-z ↗
23. Characterization of a Cr 2 O 3 scale formed on chromium with implanted yttrium ions by advanced electron microscopy10.1016/j.surfcoat.2019.03.081 ↗
24. Electrodeposition of yttria/cobalt oxide and yttria/gold coatings onto ferritic stainless steel for SOFC interconnects10.1016/j.jpowsour.2010.02.055 ↗
25. Anode side diffusion barrier coating for solid oxide fuel cells interconnects10.1115/1.3182731 ↗
26. Electrolytic and electrophoretic deposition of CeO2 films10.1016/S0167-577X(99)00087-7 ↗
27. Application of electrophoretic and electrolytic deposition techniques in ceramics processing10.1016/S1359-0286(02)00080-3 ↗
28. Electrochemical deposition of yttrium oxide10.1039/b000311p ↗
29. Cathodic electrodeposition of ceramic and organoceramic materials. Fundamental aspects10.1016/S0001-8686(01)00068-9 ↗
30. Severe dual atmosphere effect at 600 °C for stainless steel 44110.1016/j.jpowsour.2015.10.001 ↗
31. Ceria based protective coatings for steel interconnects prepared by spray pyrolysis10.1016/j.proeng.2014.12.493 ↗
32. Long-term behaviour of solid oxide fuel cell interconnect materials in contact with Ni-mesh during exposure in simulated anode gas at 700 and 800°C10.1016/j.jpowsour.2014.07.189 ↗
33. Oxidation of La–Sr–Mn-coated interconnector alloys for steam electrolysis under pressure in pure oxygen and in pure steam
34. Electrically conductive diffusion barrier layers for metal-supported SOFC10.1016/j.ssi.2008.03.002 ↗
35. Screen-printed (La,Sr)CrO3 coatings on ferritic stainless steel interconnects for solid oxide fuel cells using nanopowders prepared by means of ultrasonic spray pyrolysis10.1016/j.jpowsour.2012.02.015 ↗
36. Effect of coatings on long term behaviour of a commercial stainless steel for solid oxide electrolyser cell interconnect application in H2/H2O atmosphere10.1016/j.ijhydene.2014.07.058 ↗
37. Coated interconnects development for high temperature water vapour electrolysis: study in anode atmosphere10.1016/j.ijhydene.2013.10.026 ↗
38. Corrosion study of ceria protective layer deposited by spray pyrolysis on steel interconnects10.1002/9781119320197.ch7 ↗
39. Diffusion of nickel into ferritic steel interconnects of solid oxide fuel/electrolysis stacks10.1149/05701.2245ecst ↗
40. Modeling of Ni diffusion induced austenite formation in ferritic stainless steel interconnects10.1149/06801.1691ecst ↗
41. Oxidation behaviour and phase transformations of an interconnect material in simulated anode environment of intermediate temperature solid oxide fuel cells, Mater10.1080/09603409.2016.1244373 ↗
42. Testing of Ni‐plated ferritic steel interconnect in SOFC stacks10.1002/fuce.200500114 ↗
43. Interface resistance between FeCr interconnects and Ni/YSZ
44. High temperature stability of porous metal substrates under highly humidified hydrogen conditions for metal supported Solid Oxide Fuel Cells10.1016/j.ssi.2012.06.014 ↗
45. Interconnect corrosion in steam containing fuel gas10.1149/07801.1543ecst ↗
46. Oxidation kinetics of some nickel-based superalloy foils in humidified hydrogen and electronic resistance of the oxide scale formed Part II10.1149/1.1354611 ↗
47. The oxidation of coated SOFC interconnects in fuel side environments10.1002/fuce.201500066 ↗
48. Strontium diffusion in magnetron sputtered gadolinia-doped ceria thin film barrier coatings for solid oxide fuel cells10.1002/aenm.201300003 ↗
49. Magnetron sputtered gadolinia-doped ceria diffusion barriers for metal-supported solid oxide fuel cells10.1016/j.jpowsour.2014.05.101 ↗
50. High performance metal-supported solid oxide fuel cells with Gd-doped ceria barrier layers10.1016/j.jpowsour.2011.07.014 ↗
51. Thermodynamic reassessment of the Cr-O system in the framework of solid oxide fuel cell (SOFC) research
52. Thermodynamic modeling of the ZrO2-YO1.5system10.1016/j.ssi.2004.02.017 ↗
53. Heat capacity of Ysub(1-x)Casub(x)CrOsub(3) in the temperature interval of 4.6-310 K
54. Thermodynamic functions of yttrium chromite in the temperature range of 5-310K
55. Chemical thermodynamic considerations in sintering of LaCrO[sub 3]-based perovskites10.1149/1.2085708 ↗
56. Heat capacities of LnCrO3 (Ln=rare earth)10.1016/S0925-8388(97)00053-4 ↗
57. Specific heat of a YCrO3 single crystal as investigated by a Si-N membrane based microcalorimeter10.1016/j.tca.2006.12.007 ↗
58. Study of magnetism and specific-heat properties for multiferroic YCrO3chromites
59. Thermal properties and thermochemistry of lanthanide chromates10.1007/s11172-005-0251-2 ↗
60. The equilibrium oxygen pressure over the Cr-Y2O3-YCrO3 coexistence measured with the galvanic cell using stabilized ZrO2 solid electrolyte10.1007/BF02660971 ↗
61. Thermodynamics of some new oxide reference materials for electrochemical oxygen sensors10.1016/0956-716X(93)90504-L ↗
62. Thermodynamic Modelling of the Chromium-Yttrium-Oxygen System
63. Performance evaluation of a new Fe-Cr-Mn alloy in the reducing atmosphere of solid oxide fuel cells10.1016/j.jallcom.2018.08.002 ↗
64. Comparison of iron and copper doped manganese cobalt spinel oxides as protective coatings for solid oxide fuel cell interconnects10.1016/j.jpowsour.2017.10.060 ↗
65. High temperature oxidation of ferritic steels for solid oxide electrolysis stacks10.1149/05030.0011ecst ↗
66. Physical, chemical and electrochemical properties of pure and doped ceria10.1016/S0167-2738(99)00318-5 ↗
67. Size of oxide vacancies in fluorite and perovskite structured oxides10.1007/s10832-014-9916-2 ↗