Anisotropy of the mechanical properties of Li1·3Al0·3Ti1·7(PO4)3 solid electrolyte material
Source abstract
Abstract
Abstract Solid state lithium ion batteries have high potential for future energy storage since they promise high energy density and safety, latter being related to the mechanical properties of the materials. For example the micro-battery, being one application of the solid state batteries, requires a thin solid electrolyte, which renders especially anisotropic behavior of the materials’ properties important. In particular, Li1+xAlxTi2-x (PO4)3 (LATP) is a promising solid electrolyte material that possesses a rhombohedral crystal structure that might lead to such anisotropic mechanical properties. In current work a nanoindentation test is combined with EBSD technique to correlate elastic modulus and hardness of LATP to the crystal orientation. Furthermore, calculations based on the Vlassak-Nix and easy-slip models are adopted to verify the anisotropic mechanical properties. Overall, the experimentally derived elastic modulus and hardness of LATP show similar trends. The experimentally derived indentation modulus agrees well with the prediction of the Vlassak-Nix model. The normalization of the experimentally derived hardness and the hardness ratio from the easy-slip model reveal comparable trends. This work aids a deepening of the understanding of the mechanical properties of LATP electrolyte and provides a basis for further improvement of the Vlassak-Nix and easy-slip models in the application to rhombohedral materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. Building better batteries10.1038/451652a ↗
3. Lithium batteries: status, prospects and future10.1016/j.jpowsour.2009.11.048 ↗
4. Besenhard · 2008
5. Oudenhoven · 2011 · vol. 1 · 10
6. Stable cycling of double-walled silicon nanotube battery anodes through solid–electrolyte interphase control10.1038/nnano.2012.35 ↗
7. Safety mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.12.002 ↗
8. The impact of elastic deformation on deposition kinetics at lithium/polymer interfaces10.1149/1.1850854 ↗
9. Lithium-ion battery systems10.1109/JPROC.2014.2319832 ↗
10. Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: a review
11. Mechanical characterization and modeling for anodes and cathodes in lithium-ion batteries10.1016/j.jpowsour.2018.05.007 ↗
12. Coupled effect of strain rate and solvent on dynamic mechanical behaviors of separators in lithium ion batteries10.1016/j.matdes.2016.01.082 ↗
13. Mechanical and electrochemical properties of cubic and tetragonal LixLa0.557TiO3 perovskite oxide electrolytes10.1016/j.ceramint.2017.10.129 ↗
14. Yan G, Nonemacher JF, Zheng H, Finsterbusch M, Malzbender J, Krüger M. An investigation on strength distribution, subcritical crack growth and lifetime of the lithium-ion conductor Li7La3Zr2O12. J. Mater. Sci..1-11.
15. Effect of microcracking on ionic conductivity in LATP10.1016/j.jpowsour.2012.06.081 ↗
16. Stability of NaSICON-type Li1.3Al0.3Ti1.7P3O12 in aqueous solutions10.1016/j.jpowsour.2012.12.022 ↗
17. Fast Na+-ion transport in skeleton structures10.1016/0025-5408(76)90077-5 ↗
18. Ceramic and polymeric solid electrolytes for lithium-ion batteries10.1016/j.jpowsour.2010.01.076 ↗
19. LiTi2(PO4)3 (LiTi2[PO4]3) crystal structure: datasheet from "PAULING FILE multinaries edition
20. Slip systems in Al2O310.1111/j.1151-2916.1973.tb15432.x ↗
21. Microhardness anisotropy and the indentation size effect on the basal plane of single crystal hematite10.1016/S0955-2219(01)00415-0 ↗
22. Anisotropy of magnetic susceptibility of rocks and minerals10.1029/JZ068i001p00279 ↗
23. Measuring the elastic properties of anisotropic materials by means of indentation experiments10.1016/0022-5096(94)90033-7 ↗
24. Lithium and lithium ion batteries for applications in microelectronic devices: a review10.1016/j.jpowsour.2015.03.164 ↗
25. Measurement of thin film mechanical properties using nanoindentation10.1557/S0883769400041634 ↗
26. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
27. The use of the indentation loading curve to detect fracture of coatings10.1016/S0257-8972(00)01091-4 ↗
28. The use of the loading curve to assess soft coatings10.1016/S0257-8972(00)00640-X ↗
29. Mechanical properties of the solid electrolyte Al-substituted Li7La3Zr2O12 (LLZO) by utilizing micro-pillar indentation splitting test10.1016/j.jeurceramsoc.2018.02.032 ↗
30. Microstructure and properties investigation of garnet structured Li7La3Zr2O12 as electrolyte for all-solid-state batteries10.1016/j.ssi.2018.04.016 ↗
31. A review of advanced techniques for characterising SOFC behaviour10.1002/fuce.200800110 ↗
32. Nanoindentation derived elastic constants of carbon fibres and their nanostructural based predictions10.1016/j.carbon.2017.04.048 ↗
33. Using indentation to characterize the poroelasticity of gels10.1063/1.3370354 ↗
34. Orientation-dependent hardness and nanoindentation-induced deformation mechanisms of WC crystals10.1016/j.actamat.2014.09.048 ↗
35. Influence of microstructure and AlPO4 secondary-phase on the ionic conductivity of Li1.3Al0.3Ti1.7(PO4)3 solid-state electrolyte10.1142/S1793604716500661 ↗
36. Influence of sintering temperature on conductivity and mechanical behavior of the solid electrolyte LATP10.1016/j.ceramint.2019.04.191 ↗
37. Calculating anisotropic physical properties from texture data using the MTEX open-source package10.1144/SP360.10 ↗
38. Modeling finite deformations in trigonal ceramic crystals with lattice defects10.1016/j.ijplas.2010.01.014 ↗
39. Mechanical and electrochemical properties of cubic and tetragonal LixLa0.557TiO3 perovskite oxide electrolytes10.1016/j.ceramint.2017.10.129 ↗
40. Mechanical aspects of ferro-elastic behavior and phase composition of La0.58Sr0.4Co0.2Fe0.8O3−δ10.1016/j.memsci.2009.11.047 ↗
41. Effect of the continuous stiffness measurement on the mechanical properties extracted using spherical nanoindentation10.1016/j.actamat.2013.03.005 ↗
42. The continuous stiffness measurement technique in nanoindentation intrinsically modifies the strength of the sample10.1080/14786435.2012.722234 ↗
43. Elastic properties of alkali superionic conductor electrolytes from first principles calculations10.1149/2.0061602jes ↗
44. The indentation modulus of elastically anisotropic materials for indenters of arbitrary shape10.1016/S0022-5096(03)00066-8 ↗
45. Elastic constants of synthetic single‐crystal corundum at room temperature10.1111/j.1151-2916.1960.tb13663.x ↗
46. Nanoindentation induced deformation anisotropy in β-Si3N4 ceramic crystals10.1016/j.jeurceramsoc.2015.11.028 ↗
47. Plastic deformation of single crystals of sapphire: basal slip and twinning10.1016/0001-6160(57)90090-1 ↗
48. Deformation of sapphire induced by a spherical indentation on the (1010) plane10.1063/1.115713 ↗
49. Glide systems of hematite single crystals in deformation experiments10.1016/j.oregeorev.2006.03.007 ↗
50. Spark plasma sintered/synthesized dense and nanostructured materials for solid-state Li-ion batteries: overview and perspective10.1016/j.jpowsour.2013.09.010 ↗
51. Elastic moduli and instability in molecular crystals10.1088/0953-8984/9/27/015 ↗
52. Theoretical investigation of mechanical and thermal properties of MPO4 (M= Al, Ga)10.1016/j.jeurceramsoc.2013.04.020 ↗
53. Hirota · 1994 · vol. 93 · 441
54. A systematic study of Nasicon-type Li1+xMxTi2−x(PO4)3 (M: Cr, Al, Fe) by neutron diffraction and impedance spectroscopy10.1016/j.ssi.2014.07.018 ↗
55. Porosity and microstructure control of porous ceramics by partial hot pressing10.1557/JMR.2001.0262 ↗
56. Mechanical properties and lifetime predictions of dense SrTi1-xFexO3-δ (x= 0.25, 0.35, 0.5)10.1016/j.jeurceramsoc.2017.02.038 ↗
57. The porosity dependence of mechanical properties of sintered alumina
58. Aono · 1989 · 136 · 590
59. Residual stress. Part 2–Nature and origins10.1179/026708301101510087 ↗