Facile synthesis of Mn2.1V0.9O4/rGO: A novel high-rate anode material for lithium-ion batteries
Source abstract
Abstract
Abstract The development of novel manganese vanadate electrode materials with high capacity and good rate capability is a great challenge. In this work, a novel manganese vanadate grown on reduced graphene oxide is successfully prepared by a fast and facile approach. Small Mn2.1V0.9O4 particles (20–50 nm) are anchored on reduced graphene oxide, which significantly alleviates volume changes and improves electrical conductivity and lithium ion transfer. In addition, the strong chemical interactions between Mn2.1V0.9O4 and reduced graphene oxide are conducive to accelerate charge transfer. These features are favorable for achieving high reversible capacity and excellent rate performance. As an anode for lithium-ion batteries, a high discharge capacity of 981 mA h g−1 is retained after 80 cycles at 100 mA g−1. Even at 2000 mA g−1, a high capacity of 748 mA h g−1 is achieved. New prospects are brought by this work for the synthesis and the potential application of manganese vanadate materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Rational material design for ultrafast rechargeable lithium-ion batteries10.1039/C4CS00442F ↗
2. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
3. Promise and reality of post-lithium-ion batteries with high energy densities10.1038/natrevmats.2016.13 ↗
4. Safety focused modeling of lithium-ion batteries: a review10.1016/j.jpowsour.2015.11.100 ↗
5. The environmental impact of Li-ion batteries and the role of key parameters10.1016/j.rser.2016.08.039 ↗
6. A review of safety-focused mechanical modeling of commercial lithium-ion batteries10.1016/j.jpowsour.2017.12.034 ↗
7. The role of nanotechnology in the development of battery materials for electric vehicles10.1038/nnano.2016.207 ↗
8. Hybrid battery/supercapacitor energy storage system for the electric vehicles10.1016/j.jpowsour.2017.11.040 ↗
9. Nitrogen-doped porous carbon nanofiber webs as anodes for lithium ion batteries with a superhigh capacity and rate capability10.1002/adma.201104634 ↗
10. Review on recent progress of nanostructured anode materials for Li-ion batteries10.1016/j.jpowsour.2013.11.103 ↗
11. Facile synthesis of a MoO2-Mo2C-C composite and its application as favorable anode material for lithium ion batteries10.1016/j.jpowsour.2016.01.014 ↗
12. Facile synthesis of Fe4N/Fe2O3/Fe/porous N-doped carbon nanosheet as high-performance anode for lithium-ion batteries10.1016/j.jpowsour.2018.02.071 ↗
13. A hierarchical Zn2Mo3O8 nanodots-porous carbon composite as a superior anode for lithium-ion batteries10.1039/C6CC05252E ↗
14. Surfactant-free self-assembly of reduced graphite oxide-MoO2 nanobelt composites used as electrode for lithium-ion batteries10.1016/j.electacta.2016.06.139 ↗
15. Recent developments and understanding of novel mixed transition-metal oxides as anodes in lithium ion batteries10.1002/aenm.201502175 ↗
16. Ultrathin-nanosheet induced synthesis of 3D transition metal oxides networks for lithium ion battery anodes10.1002/adfm.201605017 ↗
17. Scalable dry production process of a superior 3D net-like carbon-based iron oxide anode material for lithium ion batteries10.1002/anie.201707647 ↗
18. Uniform pomegranate-like nanoclusters organized by ultrafne transition metal oxide@nitrogen-doped carbon subunits with enhanced lithium storage properties
19. Controlled synthesis of hierarchical CoxMn3-xO4 array micro-/nanostructures with tunable morphology and composition as integrated electrodes for lithium-ion batteries10.1039/C3EE41181H ↗
20. Self-assembly of Co3V2O8 multilayered nanosheets: controllable synthesis excellent Li-storage properties, and investigation of electrochemical mechanism10.1021/nn406449u ↗
21. Mesoporous quasi-single-crystalline NiCo2O4 superlattice nanoribbons with optimizable lithium storage properties10.1039/C5TA01229E ↗
22. Metal–organic framework-combustion: a new, cost-effective and one-pot technique to produce a porous Co3V2O8 microsphere anode for high energy lithium ion batteries10.1039/C6TA05919H ↗
23. Co3V2O8 hexagonal pyramid with tunable inner structure as high performance anode materials for lithium ion battery10.1016/j.electacta.2017.04.013 ↗
24. Large-scale synthesis of Co2V2O7 hexagonal microplatelets under ambient conditions for highly reversible lithium storage10.1039/C5TA03106K ↗
25. Facile synthesis of a Co3V2O8 interconnected hollow microsphere anode with superior high-rate capability for Li-ion batteries10.1039/C6TA01339B ↗
26. Hydrothermal synthesis of MnV2O6 nanobelts and its application in lithium-ion battery10.1016/j.matlet.2014.03.059 ↗
27. Investigation of Li-ion storage properties of earth abundant β-Mn2V2O7 prepared using facile green strategy10.1016/j.jpowsour.2017.03.054 ↗
28. A facile route to synthesize multiparous MnCo2O4 and CoMn2O4 spinel quasi-hollow spheres with improved lithium storage properties10.1039/c2nr33576j ↗
29. One-step calcination-free synthesis of multicomponent spinel assembled microspheres for high-performance anodes of Li-ion batteries: a case study of MnCo2O410.1021/am404862v ↗
30. Corncob-shaped ZnFe2O4/C nanostructures for improved anode rate and cycle performance in lithium-ion batteries10.1039/C5RA04790K ↗
31. High-performance carbon-coated ZnMn2O4 nanocrystallite supercapacitors with tailored microstructures enabled by a novel solution combustion method10.1016/j.jpowsour.2017.12.022 ↗
32. Achieving Ni3V2O8 amorphous wire encapsulated in crystalline tube nanostructure as anode materials for lithium ion batteries10.1016/j.nanoen.2017.01.044 ↗
33. Ordered mesoporous carbon supported Ni3V2O8 composites for lithium-ion batteries with long-term and high-rate performance10.1039/C7TA11268H ↗
34. Significant impact of 2D graphene nanosheets on large volume change tin-based anodes in lithium-ion batteries: a review10.1016/j.jpowsour.2014.10.008 ↗
35. The developments of SnO2/graphene nanocomposites as anode materials for high performance lithium ion batteries: a review10.1016/j.jpowsour.2015.11.017 ↗
36. MoS2/Graphene composite anodes with enhanced performance for sodium-ion batteries: the role of the two-dimensional heterointerface10.1002/adfm.201404078 ↗
37. Embedded into graphene Ge nanoparticles highly dispersed on vertically aligned graphene with excellent electrochemical performance for lithium storage10.1021/am505499x ↗
38. Smart reconstruction of dual-carbon decorated MnO for anode with high-capacity and ultralong-life lithium storage properties10.1016/j.carbon.2016.12.090 ↗
39. Mesoporous single crystals Li4Ti5O12 grown on rGO as high-rate anode materials for lithium-ion batteries10.1039/C4CC02886D ↗
40. Strongly coupled graphene/Mn3O4 composite with enhanced electrochemical performance for supercapacitor electrode10.1016/j.electacta.2015.08.032 ↗
41. Synthesis of Mn3O4/N-doped graphene hybrid and its improved electrochemical performance for lithium-ion batteries10.1016/j.ceramint.2016.12.138 ↗
42. Mn3s exchange splitting in mixed-valence manganites10.1103/PhysRevB.65.113102 ↗
43. Valence state of manganese and iron ions in La1−xAxMnO3 (A = Ca, Sr) and Bi1−xSrxFeO3 systems from Mn2p, Mn3s, Fe2p and Fe3s X-ray photoelectron spectra. Effect of delocalization on Fe3s spectra splitting10.1016/j.jallcom.2015.06.161 ↗
44. Peapod-like V2O3 nanorods encapsulated into carbon as binder-free and flexible electrodes in lithium-ion batteries10.1016/j.jpowsour.2016.09.031 ↗
45. One-step synthesis of porous V2O3@C hollow spheres as a high-performance anode for lithium-ion batteries10.1039/C8CC03875A ↗
46. Facile synthesis of NiCo2O4-reduced graphene oxide nanocomposites with improved electrochemical properties10.1016/j.electacta.2014.07.063 ↗
47. TiO2 quantum dots embedded in bamboo-like porous carbon nanotubes as ultra high power and long life anodes for lithium ion batteries10.1016/j.jpowsour.2016.04.033 ↗
48. Boosting bifunctional oxygen electrocatalysis with 3D graphene aerogel-supported Ni/MnO particles10.1002/adma.201704609 ↗
49. Constructing Mn–O–C bonds in Mn3O4/Super P composite for superior performance in Li-ion battery10.1016/j.jelechem.2017.05.032 ↗
50. In situ synthesis of Mn3O4 nanoparticles on hollow carbon nanofiber as high-performance lithium-ion battery anode10.1002/chem.201801196 ↗
51. Facilely tuning porous NiCo2O4 nanosheets with metal valence-state alteration and abundant oxygen vacancies as robust electrocatalysts towards water splitting10.1002/chem.201504739 ↗
52. Facile synthesis of NiCo2O4/carbon black composite as counter electrode for dye-sensitized solar cells10.1016/j.apsusc.2017.05.057 ↗
53. Binding SnO2 nanocrystals in nitrogen-doped graphene sheets as anode materials for lithium-ion batteries10.1002/adma.201300071 ↗
54. Highly active and durable methanol oxidation electrocatalyst based on the synergy of platinum–nickel hydroxide–graphene10.1038/ncomms10035 ↗
55. Graphene oxide templated growth and superior lithium storage performance of novel hierarchical Co2V2O7 nanosheets10.1021/acsami.5b11510 ↗
56. Novel Co2VO4 anodes using ultralight 3D metallic current collector and carbon sandwiched structures for high-performance Li-ion batteries10.1002/smll.201701260 ↗
57. Carbon-coated MnO microparticulate porous nanocomposites serving as anode materials with enhanced electrochemical performances10.1016/j.nanoen.2014.06.025 ↗
58. Hierarchical three-dimensional MnO nanorods/carbon anodes for ultralong-life lithium ion batteries10.1039/C6TA06933A ↗
59. Fast synthesis of Co1.8V1.2O4/rGO as a high-rate anode material for lithium-ion batteries10.1039/C8CC03239D ↗
60. Novel bake-in-salt method for the synthesis of mesoporous Mn3O4@C networks with superior cycling stability and rate performance10.1021/acsami.6b10121 ↗
61. Understanding conversion-type electrodes for lithium rechargeable batteries10.1021/acs.accounts.7b00487 ↗
62. One-dimensional hybrid nanocomposite of high-density monodispersed Fe3O4 nanoparticles and carbon nanotubes for high-capacity storage of lithium and sodium10.1039/C6TA07452A ↗
63. Carbonized polydopamine coated single-crystalline NiFe2O4 nanooctahedrons with enhanced electrochemical performance as anode materials in a lithium ion battery10.1016/j.electacta.2017.02.020 ↗
64. Facile synthesis of Mn6.87(OH)3(VO4)3.6(V2O7)0.2 microtubes and their application as an anode material for lithium-ion batteries10.1039/C5RA17160A ↗
65. Hydrothermal synthesis of unique hollow hexagonal prismatic pencils of Co3V2O8·nH2O: a new anode material for lithium-ion batteries10.1002/anie.201503487 ↗
66. Co3V2O8 sponge network morphology derived from metalorganic framework as an excellent lithium storage anode material10.1021/acsami.6b01047 ↗
67. Mesoporous Co3V2O8 nanoparticles grown on reduced graphene oxide as a high-rate and long-life anode material for lithium-ion batteries10.1039/C5TA10719A ↗
68. Acetylene black induced heterogeneous growth of macroporous CoV2O6 nanosheet for high-rate pseudocapacitive lithium-ion battery anode10.1021/acsami.6b00596 ↗
69. CoV2O4: a novel anode material for lithium-ion batteries with excellent electrochemical performance10.1039/C7CC09762J ↗
70. Orderly packed anodes for high-power lithium-ion batteries with super-long cycle life: rational design of MnCO3/large-area graphene composites10.1002/adma.201404611 ↗