journal article·2018-06

Doping stabilized Li3V2(PO4)3 cathode for high voltage, temperature enduring Li-ion batteries

Kaushik Kalaga, Farheen N. Sayed, Marco-Tulio F. Rodrigues, Ganguli Babu, Hemtej Gullapalli, Pulickel M. Ajayan

Publisher page

Abstract

Abstract Structural and stoichiometric alterations in cathode materials with high intercalation voltages have been a bottleneck for next generation lithium ion batteries. Moreover, structure damage with the slightest of temperature elevation is predominant in known cathode systems. Monoclinic Li3V2(PO4)3 (LVP) with high intercalation voltage (>4.0 V) is a potential high-power cathode for lithium ion batteries owing to extraordinary stability of the phosphate anion framework. However, severe vanadium dissolution and lattice re-arrangement remains the biggest nuisance. Modification of electron conduction pathways by doping LVP lattice with Cr3+ is studied here and the efficacy of Cr3+ to stabilize the structure is understood. Vacant d-orbital sites in Cr3+ promote de-localization of electrons suppressing disproportionation and hence vanadium dissolution resulting in improved electrochemical performance for robust cycling conditions. Significant enhancement in specific capacity retention (from 26% to 84%) and improved cycle life of 400 high power cycles was observed on doping suggesting excellent performance of the cathode at high temperature (60 °C) environments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Layered lithium transition metal oxide cathodes towards high energy lithium-ion batteries10.1039/c2jm14305d ↗
2. Recent developments in cathode materials for lithium ion batteries10.1016/j.jpowsour.2009.08.089 ↗
3. Structural considerations of layered and spinel lithiated oxides for lithium ion batteries10.1149/1.2050053 ↗
4. Demonstrating oxygen loss and associated structural reorganization in the lithium Battery cathode Li[Ni0.2Li0.2Mn0.6]O210.1021/ja062027+ ↗
5. Significance of the tetrahedral a site on the electrochemical performance of substituted Li1.05 M 0.05Mn1.90 O 4 spinel electrodes ( M = Li , Mg , Zn , Al ) in lithium cells10.1149/1.1614798 ↗
6. Charge, potential, and phase stability of layered Li ( Ni0.5Mn0.5 ) O 210.1149/1.1480135 ↗
7. A promising cathode for Li-ion batteries: Li3V2(PO4)310.1016/j.ensm.2016.02.002 ↗
8. Lithium vanadium phosphate as cathode material for lithium ion batteries10.1007/s11581-015-1405-3 ↗
9. A better understanding of the capacity fading mechanisms of Li3V2(PO4)310.1039/C5RA11510H ↗
10. A comparative structural and electrochemical study of monoclinic Li3Fe2(PO4)3 and Li3V2(PO4)310.1016/S0378-7753(03)00150-2 ↗
11. Application of monoclinic graphene-decorated Li3V2(PO4)3/C nanocrystals as an ultra-high-rate cathode for lithium-ion batteries10.1016/j.ceramint.2016.01.142 ↗
12. Effects of morphology on the electrochemical performances of Li3V2(PO4)3 cathode material for lithium ion batteries10.1039/C5RA07356A ↗
13. Electrochemical characterization for lithium vanadium phosphate with different calcination temperatures prepared by the sol–gel method10.1016/j.matchar.2015.07.014 ↗
14. Manipulating size of Li3V2(PO4)3 with reduced graphene oxide: towards high-performance composite cathode for lithium ion batteries10.1038/srep05768 ↗
15. Synthesis of flower-like Li3V2(PO4)3/C cathode with mixed morphology for advanced lithium-ion batteries10.1007/s11581-014-1139-7 ↗
16. Insight into Fe incorporation in Li3V2(PO4)3/C cathode material10.1149/2.001210jes ↗
17. Preparation and electrochemical studies of Fe-doped Li3V2(PO4)3 cathode materials for lithium-ion batteries10.1016/j.jpowsour.2006.08.008 ↗
18. Li3MxV2-x(PO4)3/C (M=Fe, Co) composite cathodes with extended solubility limit and improved electrochemical behavior10.1039/c2ra20998e ↗
19. Enhancement of discharge capacity of Li3V2(PO4)3 by stabilizing the orthorhombic phase at room temperature10.1016/S0167-2738(00)00292-7 ↗
20. The effect of Al substitution on the electrochemical insertion properties of the lithium vanadium phosphate, Li3V2 ( PO4 ) 310.1149/1.2437072 ↗
21. Aluminothermal synthesis and characterization of Li3V2−xAlx(PO4)3 cathode materials for lithium ion batteries10.1016/j.electacta.2010.12.063 ↗
22. Preparation and electrochemical performance studies on Cr-doped Li3V2(PO4)3 as cathode materials for lithium-ion batteries10.1016/j.electacta.2009.05.041 ↗
23. Mn influence on the electrochemical behaviour of Li3V2(PO4)3 cathode material10.1016/j.electacta.2010.12.011 ↗
24. Effect of Mg doping on electrochemical performance of Li3V2(PO4)3/C cathode material for lithium ion batteries10.1016/S1003-6326(15)63840-7 ↗
25. Randomly stacked holey graphene anodes for lithium ion batteries with enhanced electrochemical performance10.1039/c3ta10457e ↗
26. Li2.5V2(PO4)3: a room-temperature analogue to the fast-ion conducting high-temperature γ-phase of Li3V2(PO4)310.1021/cm034802f ↗
27. Hierarchical carbon decorated Li3V2(PO4)3 as a bicontinuous cathode with high-rate capability and broad temperature adaptability10.1002/aenm.201400107 ↗
28. High rate capability of Li(Ni1/3Mn1/3Co1/3)O2 electrode for Li-Ion batteries10.1149/2.062204jes ↗
29. Unexpected high power performance of atomic layer deposition coated Li[Ni1/3Mn1/3Co1/3]O2 cathodes10.1016/j.jpowsour.2013.12.119 ↗