Meso-pores carbon nano-tubes (CNTs) tissues-perfluorocarbons (PFCs) hybrid air-electrodes for Li-O2 battery
Source abstract
Abstract
Abstract Adding immiscible perfluorocarbons (PFCs), possessing superior oxygen solubility and diffusivity, to a free-standing (metal-free and binder-free) CNTs air-electrode tissues with a meso-pore structure, fully maximized the advantages of PFCs as oxygenated-species' channels-providers. The discharge behavior of hybrid PFCs-CNT Li-O 2 systems demonstrated a drastic increase in cell capacity at high current density (0.2 mA cm −2 ), where oxygen transport limitations are best illustrated. The results of this research revealed several key factors affecting PFCs-Li-O 2 systems. The incorporation of PFCs with higher superoxide solubility and oxygen diffusivity, but more importantly higher PFCs/electrolyte miscibility, in a meso-pore air-electrode enabled better exploitation of PFCs potential. Consequently, the utilization of the air-electrode' surface area was enhanced via the formation of artificial three phase reaction zones with additional oxygen transportation routes, leading to uniform and intimate Li 2 O 2 deposit at areas further away from the oxygen reservoir. Associated mechanisms are discussed along with insights into an improved Li-O 2 battery system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advanced battery technologies research · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Li-O2 and Li-S batteries with high energy storage10.1038/nmat3191 ↗
2. Riess · 2009
3. Solute-solvent interactions in perfluorocarbon solutions of oxygen. An NMR study10.1021/ja00403a020 ↗
4. Perfluorocarbon-based oxygen delivery10.1080/10731190600973824 ↗
5. Solubility of oxygen, carbon dioxide and water in semifluorinated alkanes and in perfluorooctylbromide by molecular simulation10.1016/j.jfluchem.2003.11.003 ↗
6. Solubility of oxygen in substituted perfluorocarbons10.1016/j.fluid.2005.09.011 ↗
7. A perfluorinated moiety-grafted carbon nanotube electrode for the non-aqueous lithium–oxygen battery10.1039/C4CC08815H ↗
8. Enhanced electrochemical performance of fluorinated carbon nanotube as cathode for Li–O 2 primary batteries10.1016/j.electacta.2012.12.008 ↗
9. D. Increased discharge capacity of a Li-Air activated carbon cathode produced by preventing carbon surface passivation10.1016/j.carbon.2010.11.045 ↗
10. Realization of an artificial three-phase reaction zone in a Li-Air battery10.1002/celc.201300055 ↗
11. The role of air-electrode structure on the incorporation of immiscible PFCs in non-aqueous Li-O 2 battery10.1021/acsami.7b00076 ↗
12. Oxygen-enriched electrolytes based on perfluorochemicals for a high-capacity lithium-oxygen battery10.1039/C5TA02219C ↗
13. High rate oxygen reduction in non-aqueous electrolytes with the addition of perfluorinated additives10.1039/c1ee01556g ↗
14. A non-aqueous electrolyte for the operation of Li/air battery in ambient environment10.1016/j.jpowsour.2010.12.092 ↗
15. Partially fluorinated solvent as a Co-Solvent for the non-aqueous electrolyte of Li/air battery10.1016/j.jpowsour.2010.11.021 ↗
16. The origin of Li-O 2 battery performance enhancement using fluorocarbon additive10.1149/2.0671613jes ↗
17. Direct spinning of carbon nanotube fibers from chemical vapor deposition synthesis10.1126/science.1094982 ↗
18. Wettability assessment of finely divided solids10.1016/j.powtec.2005.05.014 ↗
19. Applicability of Washburn capillary rise for determining contact angles of powders/porous materials10.1016/j.jcis.2013.01.033 ↗
20. Equilibrium voltage and overpotential variation of nonaqueous Li–O 2 batteries using the galvanostatic intermittent titration technique10.1039/C4EE01777C ↗
21. Wang · 2017
22. Chemical and morphological changes of Li–O2 battery electrodes upon cycling10.1021/jp308093b ↗
23. Solvating additives drive solution-mediated electrochemistry and enhance toroid growth in non-aqueous Li–O2 batteries10.1038/nchem.2132 ↗
24. Graphene oxide gel-derived, free-standing, hierarchically porous carbon for high-capacity and high-rate rechargeable Li-O2 batteries10.1002/adfm.201200403 ↗
25. Tracking formation and decomposition of abacus-ball-shaped lithium peroxides in Li–O2 cells10.1021/jp310765s ↗
26. Effect of the size-selective silver clusters on lithium peroxide morphology in lithium–oxygen batteries10.1038/ncomms5895 ↗
27. Tailoring deposition and morphology of discharge products towards high-rate and long-life lithium-oxygen batteries10.1038/ncomms3438 ↗
28. The role of catalysts and peroxide oxidation in lithium–oxygen batteries10.1002/ange.201205354 ↗
29. Current density dependence of peroxide formation in the Li–O 2 battery and its effect on charge10.1039/c3ee40697k ↗
30. Communication: strong excitonic and vibronic effects determine the optical properties of Li2O210.1063/1.3645544 ↗
31. Communications: elementary oxygen electrode reactions in the aprotic Li-Air battery10.1063/1.3298994 ↗
32. The effect of interfacial deformation on electrodeposition kinetics10.1149/1.1710893 ↗
33. Operando spatiotemporal study of Li(2)O(2) grain growth and its distribution inside operating Li-O(2) batteries10.1002/cssc.201300822 ↗
34. Combined effects of oxygen diffusion and electronic resistance in Li-Air batteries with carbon nanofiber cathodes10.1149/2.0721412jes ↗
35. Mechanisms of morphological evolution of Li2O2 particles during electrochemical growth10.1021/jz4003586 ↗
36. Controlling mineral morphologies and structures in biological and synthetic systems10.1021/cr8002856 ↗
37. PANDA · 2012
38. Correlating Li/O2 cell capacity and product morphology with discharge current10.1021/acsami.5b00574 ↗
39. Changing the cathode microstructure to improve the capacity of Li-Air batteries: theoretical predictions10.1149/2.0251414jes ↗
40. Achieving low overpotential Li–O2 battery operations by Li2O2 decomposition through one-electron processes10.1021/acs.nanolett.5b04097 ↗
41. Charging a Li–O2 battery using a redox mediator10.1038/nchem.1646 ↗
42. Redox-mediated ORR and OER reactions: redox flow lithium oxygen batteries enabled with a pair of soluble redox catalysts10.1021/acscatal.6b01478 ↗
43. Proton enhanced dynamic battery chemistry for aprotic lithium–oxygen batteries10.1038/ncomms14308 ↗
44. Van der Waals interactions in non-polar liquids10.1039/C2SC21666C ↗
45. PFC and triglyme for Li-Air batteries: a molecular dynamics study10.1021/acs.jpcb.5b12075 ↗
46. Effect of solvation with salting effect on solubilities of fluorocarbons in alcohols10.1016/j.fluid.2013.10.007 ↗
47. Specific salt effects on poly(ethylene oxide) electrolyte solutions10.1021/ma1027752 ↗
48. The salting-out effect10.1007/BF02237528 ↗
49. Effect of NaOH on the solubility of fluorocarbon in alcohol–NaOH systems10.1016/j.fluid.2009.12.021 ↗
50. Salting-in and salting-out of hydrophobic solutes in aqueous salt solutions10.1021/jp010568+ ↗
51. 1H NMR and molecular dynamics evidence for an unexpected interaction on the origin of salting-in/salting-out phenomena10.1021/jp9095634 ↗
52. Invasion percolation: a new form of percolation theory10.1088/0305-4470/16/14/028 ↗
53. Assessing the accuracy of contact angle measurements for sessile drops on liquid-repellent surfaces10.1021/la2031208 ↗
54. 2005