Suspension plasma spraying of La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes: Influence of carbon black pore former on performance and degradation
Source abstract
Abstract
Abstract Suspension plasma spray deposition is utilized to fabricate solid oxide fuel cell cathodes with minimal material decomposition. Adding carbon black as a pore former to the feedstock suspension results in smoother and more porous coatings, but over the range of carbon black concentrations studied, has little impact on the overall symmetrical cell performance. The cathode made with a suspension containing 25 wt% carbon has the highest deposition efficiency and a polarization resistance of 0.062 Ωcm2 at 744 °C. This cathode is tested for 500 h, and it is observed that adding an SDC interlayer between the YSZ electrolyte and the cathode(s) and/or coating the metal substrate with lanthanum chromite decrease the rate of performance degradation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Strategies for lowering solid oxide fuel cells operating temperature10.3390/en20401130 ↗
2. Chemical compatibility of the LaFeO3 base perovskites (La0.6Sr0.4)zFe0.8M0.2O3-δ (z=1, 0.9; M=Cr, Mn, Co, Ni) with yttria stabilized zirconia10.1016/0167-2738(96)00366-9 ↗
3. Understanding plasma spraying10.1088/0022-3727/37/9/R02 ↗
4. Plasma sprayed metal supported YSZ/Ni-LSGM-LSCF ITSOFC with nanostructured anode10.1016/j.jpowsour.2008.01.075 ↗
5. A. Ansar, G. Schiller, O. Patz, J.B. Gregoire, Z. Ilhan, Plasma sprayed oxygen electrode for solid oxide fuel cells and high temperature electrolyzers. 8th European SOFC Forum, Lucerne, 2008.
6. Electrochemical performance of (La,Sr)(Co,Fe)O3-(Ce,Gd)O3 composite cathodes10.1016/S0167-2738(02)00102-9 ↗
7. Characterization of electrical properties of GDC doped A-site deficient LSCF based composite cathode using impedance spectroscopy10.1016/j.jpowsour.2007.03.040 ↗
8. La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes infiltrated with samarium-doped cerium oxide for solid oxide fuel cells10.1016/j.jpowsour.2010.02.049 ↗
9. Fabrication and characterization of solid oxide fuel cell cathodes made from nano-structured LSCF-SDC composite feedstock10.1016/j.jpowsour.2013.03.040 ↗
10. The effect of plasma spraying power on La0.58Sr0.4Co0.2Fe0.8O3-δ-La0.8Sr0.2Ga0.8Mg0.2O3-δ composite cathode interlayer microstructure and cell performance10.1002/fuce.201300143 ↗
11. High performance metal-supported intermediate temperature solid oxide fuel cells fabricated by atmospheric plasma spraying10.1016/j.jpowsour.2010.10.029 ↗
12. Nanostructured composite cathodes by suspension plasma spraying for SOFC applications10.1149/1.3570218 ↗
13. Rare earths supply chains: current status, constraints and opportunities10.1016/j.resourpol.2014.03.004 ↗
14. Performance of metal-supported composite and single-phase cathodes based on LSCF and SSC10.1149/1.3570182 ↗
15. Electrochemical performance of solid oxide fuel cells having electrolytes made by suspension and solution precursor plasma spraying10.1016/j.jpowsour.2013.06.092 ↗
16. Fabrication of reactive element oxide coatings on porous ferritic stainless steel for use in metal-supported solid oxide fuel cells10.1016/j.surfcoat.2015.03.041 ↗
17. Harris · 2013
18. Permeability and microstructure of suspension plasma-sprayed YSZ electrolytes for SOFCs on various substrates10.1007/s11666-012-9829-z ↗
19. Deposition of lanthanum strontium cobalt ferrite (LSCF) using suspension plasma spraying for oxygen transport membrane applications10.1007/s11666-015-0269-4 ↗
20. Atmospheric plasma spraying low-temperature cathode materials for solid oxide fuel cells10.1007/s11666-009-9441-z ↗
21. Plasma spraying of ceramics with particular difficulties in processing
22. From powder properties to fuel cell performance – a holistic approach for SOFC cathode development10.1016/j.ssi.2007.11.037 ↗