Reoxidation behavior of Ni–Fe bimetallic anode substrate in solid oxide fuel cells using a thin LaGaO3 based film electrolyte
Source abstract
Abstract
Abstract The reoxidation behavior of a Ni–Fe metal anode supported cell using a thin LaGaO 3 electrolyte film was investigated as a function of the reoxidation temperature. After oxidation and reduction treatments for 2 h, the voltage did not return to the initial voltage at higher temperatures (773–973 K); however, after reoxidation at 673 K, the cell exhibited almost the same OCV as the as-prepared cell. During reoxidation with air at the higher temperatures, the Ni–Fe metal substrate exhibited two different expansion behaviors by the different oxidation rates of Ni and Fe. On the other hand, the volumetric change of the oxidized substrate at 673 K was negligible. SEM-EDX results exhibited the reoxidation of Ni–Fe occurred only at the bottom part of the substrate and at the interface between the electrolyte and the substrate. In spite of temperatures as low as 673 K, the cell generated a power of 160 mW cm −2 , which hardly decreased after the redox cycle. The increasing anodic internal resistance accompanied with unreduced Fe.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Singhal · Solid State Ionics · 2002 · 152–153 · 40510.1016/S0167-2738(02)00349-1 ↗
2. Minh · Solid State Ionics · 2004 · 174 · 27110.1016/j.ssi.2004.07.042 ↗
3. Ishihara · J. Am. Chem. Soc. · 1994 · 116 · 380110.1021/ja00088a016 ↗
4. Ishihara · Chem. Commun. · 1996 · 8 · 92910.1039/cc9960000929 ↗
5. Ishihara · J. Electrochem. Soc. · 1998 · 145 · 317710.1149/1.1838783 ↗
6. Yan · J. Electrochem. Soc. · 2002 · 149 · A113210.1149/1.1496485 ↗
7. Wang · J. Electrochem. Soc. · 2004 · 151 · A146110.1149/1.1781571 ↗
8. Yan · Electrochem. Solid-State Lett. · 2005 · 8 · A38910.1149/1.1943568 ↗
9. Ishihara · Electrochim. Acta · 2006 · 52 · 164510.1016/j.electacta.2006.03.103 ↗
10. Ju · J. Korean Ceram. Soc. · 2008 · 45 · 79610.4191/KCERS.2008.45.1.796 ↗
11. Ju · ECS Trans. · 2009 · 25 · 71910.1149/1.3205587 ↗
12. Ju · J. Power Sources · 2010 · 195 · 629410.1016/j.jpowsour.2010.04.068 ↗
13. Ju · Electrochem. Solid-State Lett. · 2010 · 13 · B13910.1149/1.3494029 ↗
14. Mogensen · Solid State Ionics · 2000 · 129 · 6310.1016/S0167-2738(99)00318-5 ↗
15. Goodenough · Ann. Rev. Mater. Res. · 2003 · 33 · 9110.1146/annurev.matsci.33.022802.091651 ↗
16. Kharton · Solid State Ionics · 2004 · 174 · 13510.1016/j.ssi.2004.06.015 ↗
17. Fergus · J. Power Sources · 2006 · 162 · 3010.1016/j.jpowsour.2006.06.062 ↗
18. Chen · Solid State Ionics · 1994 · 70–71 · 10110.1016/0167-2738(94)90293-3 ↗
19. de Souza · Solid State Ionics · 1997 · 98 · 5710.1016/S0167-2738(96)00525-5 ↗
20. Li · Solid State Ionics · 2006 · 177 · 206510.1016/j.ssi.2006.03.004 ↗
21. ASTM B962-08. Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle. Annual Book of ASTM Standards, vol. 02.05. West Conshohocken, PA: American Society for Testing and Materials.
22. Sarantaridis · J. Electrochem. Soc. · 2008 · 155 · B46710.1149/1.2883731 ↗
23. Sarantaridis · J. Power Sources · 2008 · 180 · 70410.1016/j.jpowsour.2008.03.011 ↗
24. Hatae · Solid State Ionics · 2008 · 179 · 27410.1016/j.ssi.2008.01.018 ↗
25. Hatae · Solid State Ionics · 2009 · 180 · 130510.1016/j.ssi.2009.08.003 ↗