Modeling of a thermally integrated 10 kWe planar solid oxide fuel cell system with anode offgas recycling and internal reforming by discretization in flow direction
Source abstract
Abstract
Combined heat and power production (CHP) based on solid oxide fuel cells (SOFC) is a very promising technology to achieve high electrical efficiency to cover power demand by decentralized production. This paper presents a dynamic quasi 2D model of an SOFC system which consists of stack and balance of plant and includes thermal coupling between the single components. The model is implemented in Modelica (R) and validated with experimental data for the stack Ul-characteristic and the thermal behavior. The good agreement between experimental and simulation results demonstrates the validity of the model. Different operating conditions and system configurations are tested, increasing the net electrical efficiency to 57% by implementing an anode offgas recycle rate of 65%. A sensitivity analysis of characteristic values of the system like fuel utilization, oxygen-to-carbon ratio and electrical efficiency for different natural gas compositions is carried out. The result shows that a control strategy adapted to variable natural gas composition and its energy content should be developed in order to optimize the operation of the system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Catalysts for Methane Reforming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Gesetz für die Erhaltung, die Modernisierung und den Ausbau der Kraft-Wärme-Kopplung (KWKG), i. d. F. vom 12.07.2012 (BGBl. I S.1494), vom 19.03.2002 (BGBl. I S.1092).
2. A system level simulation model of SOFC systems for building applications
3. Carré · 2011
4. SOFC cogeneration system for building applications, part 1: development of SOFC system-level model and the parametic study10.1016/j.renene.2009.04.010 ↗
5. Implementing thermal management modeling into SOFC system level design10.1115/1.4002233 ↗
6. Modeling and control of a SOFC-GT-based autonomous power system10.1016/j.energy.2006.07.034 ↗
7. Thermodynamic analysis of an integrated solid oxide fuel cell cycle with a rankine cycle10.1016/j.enconman.2010.06.008 ↗
8. Carl · 2005
9. Dynamic modeling of a solid oxide fuel cell system in Modelica
10. Fuel Cell System Modeling for SOFC/GT Hybrid Power Plants, Part I: Modelling and Simulation Framework10.1016/j.jpowsour.2010.08.081 ↗
11. Colpan · 2009
12. A validated multi-scale model of a SOFC stack at elevated pressure10.1002/fuce.201300076 ↗
13. Comparison of Finite Volume SOFC Models for the Simulation of a Planar Cell Geometry10.1002/fuce.200400057 ↗
14. A global thermo-electrochemical model for SOFC systems design and engineering10.1016/S0378-7753(03)00067-3 ↗
15. Slippey · 2009
16. Object-based modeling of SOFC system: dynamic behavior of micro-tube SOFC10.1016/S0378-7753(03)00109-5 ↗
17. Stiller · 2006
18. McBride · 1993
19. Massoud · 2005
20. Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling10.1016/S0378-7753(02)00277-X ↗
21. VDI-Gesellschaft Verfahrenstechnik und Chemeingenieurwesen · 2006
22. Incropera · 1998
23. Wagner · 1998
24. Shekhawat · 2011
25. Methane steam reforming, methanation and water-gas-shift: I. intrinsic kinetics10.1002/aic.690350109 ↗
26. Catalytic coatings on steel for low-temperature propane prereforming to solid oxide fuel cell (SOFC) application10.1016/j.jcis.2009.04.079 ↗
27. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance10.1016/j.jpowsour.2004.06.040 ↗
28. Analysis of a solid oxide fuel cell system for combined heat and power applications under non-nominal conditions10.1016/j.electacta.2007.08.046 ↗
29. A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness10.1016/S0378-7753(00)00556-5 ↗
30. Thermal and electrochemical model of internal reforming solid oxide fuel cells with tubular geometry10.1016/j.jpowsour.2006.02.098 ↗
31. Definition and sensitivity analysis of a finite volume SOFC model for a tubular cell geometry10.1016/j.jpowsour.2004.01.043 ↗
32. Electrochemical model of the integrated planar solid oxide fuel cell (IP-SOFC)10.1016/j.cej.2004.02.005 ↗
33. Mathematical modeling of solid oxide fuel cells: A review10.1016/j.rser.2010.12.011 ↗
34. Analytical modeling of polarizations in a solid oxide fuel cell using biomass syngas product as fuel10.1016/j.applthermaleng.2006.10.011 ↗
35. Thyssen Krupp VDM GmbH · 2008
36. Braun · 2002
37. A Zero-Dimensional Model of a 2nd Generation Planar SOFC Using Calibrated Parameters
38. A hierarchical modeling approach to the simulation and control of planar solid oxide fuel cells10.1016/j.jpowsour.2008.02.021 ↗
39. Regelwerk · 2000
40. Finkenrath · 2005
41. The Electrochemistry of Ni Pattern Anodes Used as Solid Oxide Fuel Cell Model Electrodes10.1149/1.1372219 ↗