journal article·2024-02

In-situ polymerization of a free-standing and tough gel polymer electrolyte for lithium metal batteries

Yuli Wang, Zonglei Wang, Yunyang Zhao, Xueting Yang, Jie Xu, Xianke Ye, Xiancai Jiang, Yazhou Chen, Chen Li, Dezhan Ye

Publisher page

Abstract

In-situ polymerization of gel polymer electrolyte (GPE) is expected to be promising approach to solve the safety and interfacial problems of lithium ion battery, but it is still challenging ways to tradeoff the high electrochemical properties and mechanical toughness. Here, 30 μm thickness of free-standing GPEs with extremely high monomer conversion were obtained by in-situ UV approach on lithium metal anode within only few seconds. The coordination of amide and aliphatic carbonyl groups with lithium ion endows the tough mechanical properties, which tensile strength and elongation at break reach up to ∼1.0 MPa and ∼920 %. Furthermore, the good degree of graphitization on the surface of burned polymer gel contribute to its flame resistance. The ionic conductivity and lithium ion transferance number are up to 1.03 mS/cm and 0.44 at room temperature, respectively. Finally, Li/LiFePO 4 half cells assembled with the optimized GPEs exhibit stable cycle performance at 0.5C rate, delivering 77.44 % of capacity retention after 1000 cycles.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Flame-retardant crosslinked polymer stabilizes graphite-silicon composite anode for self-extinguishing lithium-ion batteries10.1002/aenm.202202779 ↗
2. Innovative electrolytes based on ionic liquids and polymers for next-generation solid -state batteries10.1021/acs.accounts.8b00566 ↗
3. Unexpected pressure effects on sulfide-based polymer-in-ceramic solid electrolytes for all-solid-state batteries10.1016/j.nanoen.2022.107679 ↗
4. Research progress in stable interfacial constructions between composite polymer electrolytes and electrodes10.1039/D1EE03466A ↗
5. Nonflammable organic electrolytes for high-safety lithium-ion batteries10.1016/j.ensm.2020.07.018 ↗
6. Design strategies of safe electrolytes for preventing thermal runaway in lithium ion batteries10.1021/acs.chemmater.0c02428 ↗
7. Recent progress in flame-retardant separators for safe lithium-ion batteries10.1016/j.ensm.2021.02.042 ↗
8. A smart polymer electrolyte coordinates the trade-off between thermal safety and energy density of lithium batteries10.1016/j.ensm.2023.03.013 ↗
9. Supremely elastic gel polymer electrolyte enables a reliable electrode structure for silicon-based anodes10.1038/s41467-019-13434-5 ↗
10. A lithium solid electrolyte of acrylonitrile copolymer with thiocarbonate moiety and its potential battery application10.1016/j.electacta.2020.137357 ↗
11. Highly conductive gel polymer electrolytes for sodium-ion batteries with hard carbon anodes10.1016/j.electacta.2022.141645 ↗
12. Electrochemical stability window of polymeric electrolytes10.1021/acs.chemmater.9b01553 ↗
13. In situ formation of poly(butyl acrylate)-based non-flammable elastic quasi-solid electrolyte for dendrite-free flexible lithium metal batteries with long cycle life for wearable devices10.1016/j.ensm.2020.10.012 ↗
14. A dual-salt gel polymer electrolyte with 3D cross-linked polymer network for dendrite-free lithium metal batteries10.1002/advs.201800559 ↗
15. Achieving uniform lithium electrodeposition in cross-linked poly(ethylene oxide) networks: "soft" polymers prevent metal dendrite proliferation10.1021/acs.macromol.0c00475 ↗
16. An intricately designed poly(vinylene carbonate-acrylonitrile) copolymer electrolyte enables 5 V lithium batteries10.1039/C9TA00204A ↗
17. Dual-interface reinforced flexible solid garnet batteries enabled by in-situ solidified gel polymer electrolytes10.1016/j.nanoen.2021.106498 ↗
18. Preparation of P(AN-MMA) microporous membrane for Li-ion batteries by phase inversion10.1016/j.memsci.2006.05.028 ↗
19. Gel polymer electrolyte based on polymethyl methacrylate matrix composited with methacrylisobutyl-polyhedral oligomeric silsesquioxane by phase inversion method10.1016/j.electacta.2018.05.012 ↗
20. Dendrite-free, high-rate, long-life lithium metal batteries with a 3D cross-linked network polymer electrolyte10.1002/adma.201604460 ↗
21. Investigation on polyethylene supported poly(butyl methacrylate-acrylonitrile-styrene) terpolymer based gel electrolyte reinforced by doping nano-SiO2 for high voltage lithium ion battery10.1016/j.electacta.2017.08.095 ↗
22. Integrated design of ultrathin crosslinked network polymer electrolytes for flexible and stable all-solid-state lithium batteries10.1016/j.ensm.2022.02.035 ↗
23. Reversible lithium-ion uptake in poly(methylmethacrylate) thin-film via lithiation/delithiation at in situ formed intramolecular cyclopentanedione10.1002/aenm.201601375 ↗
24. In situ construction of a LiF-enriched interface for stable all-solid-state batteries and its origin revealed by cryo-TEM10.1002/adma.202000223 ↗
25. In-situ preparation of gel polymer electrolyte with glass fiber membrane for lithium batteries10.1016/j.jpowsour.2020.228627 ↗
26. An integrate and ultra-flexible solid-state lithium battery enabled by in situ polymerized solid electrolyte10.1016/j.cej.2022.134644 ↗
27. Cross-linked polymeric ionic liquids ion gel electrolytes by in situ radical polymerization10.1016/j.cej.2019.122245 ↗
28. Elastomeric electrolytes for high-energy solid-state lithium batteries10.1038/s41586-021-04209-4 ↗
29. Optimized ion-conductive pathway in UV-cured solid polymer electrolytes for all-solid lithium/sodium ion batteries10.1016/j.memsci.2020.118771 ↗
30. Fumaronitrile-fixed in-situ gel polymer electrolyte balancing high safety and superior electrochemical performance for Li metal batteries10.1016/j.ensm.2021.10.042 ↗
31. Enabling interfacial stability via 3D networking single ion conducting nano fiber electrolyte for high performance lithium metal batteries10.1016/j.jpowsour.2021.229545 ↗
32. Upgrading traditional liquid electrolyte via in situ gelation for future lithium metal batteries10.1126/sciadv.aat5383 ↗
33. Solid-state polymer electrolytes with in-built fast interfacial transport for secondary lithium batteries10.1038/s41560-019-0349-7 ↗
34. Anomalously high elastic modulus of a poly(ethylene oxide)-based composite electrolyte10.1016/j.ensm.2020.11.031 ↗
35. Design of networked solid-state polymer as artificial interlayer and solid polymer electrolyte for lithium metal batteries10.1016/j.cej.2021.133442 ↗
36. Ionic conductance of gel electrolyte using a polyurethane matrix for rechargeable lithium batteries10.1016/j.electacta.2004.01.128 ↗
37. Dendrite-free lithium deposition induced by mechanical strong sponge-supported unique 3D cross-linking polymer electrolyte for lithium metal batteries10.1016/j.jpowsour.2019.226748 ↗
38. Preparation and characterization of safety PVDF/P(MMA-co-PEGMA) active separators by studying the liquid electrolyte distribution in this kind of membrane10.1016/j.electacta.2013.10.183 ↗
39. A highly durable rubber-derived lithium-conducting elastomer for lithium metal batteries10.1002/advs.202200553 ↗
40. Dendrite-free solid-state Li metal batteries enabled by bifunctional polymer gel electrolytes10.1021/acsaem.1c01634 ↗
41. Simultaneously regulating lithium ion flux and surface activity for dendrite-free lithium metal anodes10.1021/acsami.8b21069 ↗
42. Design of poly(acrylonitrile)-based gel electrolytes for high-performance lithium ion batteries10.1021/am505448a ↗
43. A wide-temperature superior ionic conductive polymer electrolyte for lithium metal battery10.1016/j.nanoen.2020.104786 ↗
44. Non-flammable sandwich-structured TPU gel polymer electrolyte without flame retardant addition for high performance lithium ion batteries10.1016/j.ensm.2022.08.013 ↗
45. Advances in composite polymer electrolytes for lithium batteries and beyond
46. Gel/solid polymer electrolytes characterized by in situ gelation or polymerization for electrochemical energy systems
47. Carboxymethylated nanocellulose-based gel polymer electrolyte with a high lithium ion transfer number for flexible lithium-ion batteries application10.1016/j.cej.2021.132604 ↗
48. Progress and prospect on failure mechanisms of solid-state lithium batteries10.1016/j.jpowsour.2018.04.055 ↗
49. Polymer-clay nanocomposite solid-state electrolyte with selective cation transport boosting and retarded lithium dendrite formation10.1002/aenm.202003114 ↗
50. In situ regulated solid electrolyte interphase via reactive separators for highly efficient lithium metal batteries10.1016/j.ensm.2020.04.043 ↗
51. Organic-inorganic composite SEI for a stable Li metal anode by in-situ polymerization10.1016/j.nanoen.2022.106983 ↗