Mechanofusing garnet solid electrolyte on the surface of Ni-rich layered oxide cathode towards high-rate capability of cylindrical Li-ion battery cells
Source abstract
Abstract
The interface between solid electrolytes and cathode materials determines charge storage mechanism of Li-ion batteries; however, it has not yet been fully investigated and understood. Herein, a diluted amount at 1 wt% of heterogenous lithium garnet Li 7La 3Zr 2O 12 (LLZO) solid electrolyte particles was chemically bonded to the Ni-rich LiNi 0.8Mn 0.1Co 0.1O 2 (NMC811) cathode by a scalable mechanofusion process. The interface chemistry was intensively investigated by an ex situ extended X-ray absorption fine structure (EXAFS). In situ X-ray diffraction was also used to investigate the charge storage mechanism of LLZO-NMC811. It was found that the LLZO-LaNiO 3-NMC811 strong bond at the interface can enhance the microstructural stability leading to high-rate capability up to 7.5C. For the charge storage mechanism, the lithium intercalation/deintercalation in NMC-LLZO undergoes a slower phase transition since the LLZO-LaNiO 3 interface can modulate Li concentration gradient and kinetics where the surface of NMC will not be fully emptied (during charge) or filled (during discharge). This will benefit the rate capability of LLZO-modified NMC material in which the Li concentration at the surface will not quickly reach a threshold value before the cut-off voltage. The practical applications of LLZO-NMC811 were eventually demonstrated in 2.1 Ah 18650-format cells with high-capacity retention and high-rate capability.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Structural changes and thermal stability of charged LiNixMnyCozO2 cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy10.1021/am506712c ↗
2. Mn versus Al in layered oxide cathodes in lithium-ion batteries: a comprehensive evaluation on long-term cyclability10.1002/aenm.201703154 ↗
3. Operando bragg coherent diffraction imaging of LiNi0.8Mn0.1Co0.1O2 primary particles within commercially printed NMC811 electrode sheets10.1021/acsnano.0c08575 ↗
4. A fast charge/discharge and wide-temperature battery with a germanium oxide layer on a Ti3C2 MXene matrix as anode10.1021/acsnano.0c00556 ↗
5. Mutual modulation between surface chemistry and bulk microstructure within secondary particles of nickel-rich layered oxides
6. Bulk fatigue induced by surface reconstruction in layered Ni-rich cathodes for Li-ion batteries10.1038/s41563-020-0767-8 ↗
7. Rational solvent molecule tuning for high-performance lithium metal battery electrolytes10.1038/s41560-021-00962-y ↗
8. Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries10.1002/anie.201409262 ↗
9. A New type of protective surface layer for high-capacity Ni-based cathode materials: nanoscaled surface pillaring layer10.1021/nl304558t ↗
10. Sol–gel synthesis and electrochemical characterization of Mg-/Zr-doped LiCoO2 cathodes for Li-ion batteries10.1016/j.jpowsour.2011.09.053 ↗
11. Zinc-Doped high-nickel, low-cobalt layered oxide cathodes for high-energy-density lithium-ion batteries10.1021/acsami.1c01824 ↗
12. Structural study of the coating effect on the thermal stability of charged MgO-coated LiNi0.8Co0.2O2 cathodes investigated by in situ XRD10.1016/j.jpowsour.2012.05.028 ↗
13. Surface modification of cathode materials from nano- to microscale for rechargeable lithium-ion batteries10.1039/c0jm00508h ↗
14. Comparison of Overcharge Behavior of AlPO[sub 4]-Coated LiCoO[sub 2] and LiNi[sub 0.8]Co[sub 0.1]Mn[sub 0.1]O[sub 2] Cathode Materials in Li-Ion Cells10.1149/1.1790511 ↗
15. Enhanced electrochemical properties of LiNi1/3Co1/3Mn1/3O2 cathode material by coating with LiAlO2 nanoparticles10.1016/j.jpowsour.2006.03.092 ↗
16. Zero-strain intercalation cathode for rechargeable Li-ion cell10.1002/1521-3773(20010917)40:18<3367::AID-ANIE3367>3.0.CO;2-A ↗
17. Suppression of cobalt dissolution from the LiCoO[sub 2] cathodes with various metal-oxide coatings10.1149/1.1627347 ↗
18. Fast lithium ion conduction in garnet-type Li7La3Zr2O1210.1002/anie.200701144 ↗
19. Crystal chemistry and stability of “Li7La3Zr2O12” garnet: a fast lithium-ion conductor10.1021/ic101914e ↗
20. Effect of the morphology of Li–La–Zr–O solid electrolyte coating on the electrochemical performance of spinel LiMn1.95Ni0.05O3.98F0.02 cathode materials10.1039/C4TA03772C ↗
21. Mechanism study on the interfacial stability of a lithium garnet-type oxide electrolyte against cathode materials10.1021/acsaem.8b01035 ↗
22. Scalable solvent-free mechanofusion and magnesiothermic reduction processes for obtaining carbon nanospheres-encapsulated crystalline silicon anode for Li-ion batteries10.1016/j.electacta.2020.136457 ↗
23. Core-shell Ni-rich NMC-Nanocarbon cathode from scalable solvent-free mechanofusion for high-performance 18650 Li-ion batteries10.1016/j.ensm.2021.01.032 ↗
24. Compositionally graded cathode material with long-term cycling stability for electric vehicles application10.1002/aenm.201601417 ↗
25. Insight into cathode surface to boost the performance of solid-state batteries10.1016/j.ensm.2020.12.003 ↗
26. Surface regulation enables high stability of single-crystal lithium-ion cathodes at high voltage10.1038/s41467-020-16824-2 ↗
27. Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application10.1039/C3EE42704H ↗
28. Spinel LiMn2O4 active material with high capacity retention10.1016/j.apsusc.2007.04.070 ↗
29. Capacity fading of Ni-rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation?10.1021/acs.chemmater.7b05269 ↗