Understanding thermal and mechanical effects on lithium plating in lithium-ion batteries
Source abstract
Abstract
Lithium plating is one of the main concerns for cell durability, as cyclable lithium and cell capacity are decreased during the process. Thermal and mechanical loads can influence cell behavior, including lithium plating driving forces, as suggested by the Arrhenius equation and the Bruggeman relation, respectively. Hence, a 1D and a 3D model are employed to study the thermal and mechanical effects on lithium plating in a lithium-ion battery with a high areal capacity (4 mAh/cm(2)). The 1D model assumes uniform mechanical and temperature profile, while the 3D model is capable of capturing the nonuniformity of stress and temperature in the cell. The effects of mechanical deformation and different temperatures on the process of lithium plating are investigated in this study. With the help of the 1D charging simulations, it is observed that lower temperatures increase the risk of lithium plating and the presence of mechanical deformations can accelerate its initiation. Furthermore, 3D charging simulations indicated that folds and boundaries of jellyrolls are more susceptible to lithium plating due to the higher stress concentration and lower temperature, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. On battery materials and methods
2. A review on the key issues of the lithium ion battery degradation among the whole life cycle10.1016/j.etran.2019.100005 ↗
3. Transport and durability of energy storage materials operating at high temperatures10.1021/acsnano.0c04402 ↗
4. Current and future lithium-ion battery manufacturing10.1016/j.isci.2021.102332 ↗
5. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
6. Ageing mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.01.006 ↗
7. Main aging mechanisms in Li ion batteries10.1016/j.jpowsour.2005.03.172 ↗
8. Cyclable lithium and capacity loss in Li-ion cells10.1149/1.1870752 ↗
9. Review–lithium plating detection methods in Li-ion batteries10.1149/1945-7111/abd3b8 ↗
10. Understanding undesirable anode lithium plating issues in lithium-ion batteries10.1039/C6RA19482F ↗
11. Fast-charging of automotive lithium-ion cells: In-situ lithium-plating detection and comparison of different cell designs10.1149/1945-7111/abb564 ↗
12. Fast charging of lithium-ion batteries at all temperatures10.1073/pnas.1807115115 ↗
13. In-situ detection of lithium plating using high precision coulometry10.1149/2.0621506jes ↗
14. Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries10.1016/j.jpowsour.2013.12.060 ↗
15. Dendrite-separator interactions in lithium-based batteries10.1016/j.jpowsour.2014.11.056 ↗
16. A model of concurrent lithium dendrite growth, SEI growth, SEI penetration and regrowth10.1149/2.0381709jes ↗
17. Observation of lithium dendrites at ambient temperature and below10.1149/2.0041502eel ↗
18. Overcharge reaction of lithium-ion batteries10.1016/j.jpowsour.2005.03.105 ↗
19. Thermal instability of organic esters and ethers with deposited lithium in lithium-ion battery10.1007/s10973-014-3689-3 ↗
20. Über die dissociationswärme und den einfluss der temperatur auf den dissociationsgrad der elektrolyte10.1515/zpch-1889-0408 ↗
21. Li plating as unwanted side reaction in commercial Li-ion cells – A review10.1016/j.jpowsour.2018.02.063 ↗
22. Lithium plating mechanism, detection, and mitigation in lithium-ion batteries10.1016/j.pecs.2021.100953 ↗
23. Ren · J. Electrochem. Soc. · 2018 · 165 · A216710.1149/2.0661810jes ↗
24. Electrochemical-thermal modeling of lithium plating/stripping of Li(Ni0.6Mn0.2Co0.2)O2/Carbon lithium-ion batteries at subzero ambient temperatures10.1016/j.jpowsour.2019.02.001 ↗
25. Waldmann · 2016 · A1232
26. Stress evolution and capacity fade in constrained lithium-ion pouch cells10.1016/j.jpowsour.2013.06.165 ↗
27. The effects of defects on localized plating in lithium-ion batteries10.1149/2.1051507jes ↗
28. Lithium plating on graphite negative electrodes: Innovative qualitative and quantitative investigation methods10.1149/2.0451514jes ↗
29. An efficient parallelizable 3D thermoelectrochemical model of a Li-ion cell
30. Thermoelectrochemical simulations of performance and abuse in 50-Ah automotive cells10.1016/j.jpowsour.2014.06.080 ↗
31. A modified electrochemical model to account for mechanical effects due to lithium intercalation and external pressure10.1149/1945-7111/abe16d ↗
32. An electro-chemo-thermo-mechanical coupled three-dimensional computational framework for lithium-ion batteries10.1149/1945-7111/abd1f2 ↗
33. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
34. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
35. Relaxation phenomena in lithium-ion-insertion cells10.1149/1.2054868 ↗
36. Multi-scale investigation of thickness changes in a commercial pouch type lithium-ion battery10.1016/j.est.2016.01.006 ↗
37. Battery dimensional changes occurring during charge/discharge cycles—thin rectangular lithium ion and polymer cells10.1016/S0378-7753(03)00281-7 ↗
38. Berechnung verschiedener physikalischer konstanten von heterogenen substanzen. I. Dielektrizitätskonstanten und leitfähigkeiten der Mischkörper aus isotropen substanzen10.1002/andp.19354160705 ↗
39. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x=1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries10.1016/j.jpowsour.2013.01.063 ↗
40. Study of the failure mechanisms of LiNi0.8Mn0.1Co0.1O2 cathode material for lithium ion batteries
41. Evolution of structure and lithium dynamics in LiNi0.8Mn0.1Co0.1o2 (NMC811) cathodes during electrochemical cycling10.1021/acs.chemmater.9b00140 ↗
42. Electronic structure and comparative properties of LiNixMnyCozO2 cathode materials10.1021/acs.jpcc.7b00810 ↗
43. Turner · 2015
44. Quantifying tortuosity in porous Li-ion battery materials10.1016/j.jpowsour.2008.12.032 ↗
45. Direct measurements of effective ionic transport in porous Li-ion electrodes10.1149/2.062302jes ↗
46. Temperature and concentration dependence of the ionic transport properties of lithium-ion battery electrolytes10.1149/2.0571912jes ↗
47. Tortuosity determination of battery electrodes and separators by impedance spectroscopy10.1149/2.1141607jes ↗
48. Heat-generation rate and general energy balance for insertion battery systems10.1149/1.1837884 ↗
49. A study of model-based protective fast-charging and associated degradation in commercial smartphone cells: Insights on cathode degradation as a result of lithium depositions on the anode10.1002/aenm.202003019 ↗
50. The low temperature performance of Li-ion batteries10.1016/S0378-7753(02)00618-3 ↗
51. Pesaran · 2013