journal article·2022-03

Improving interfacial stability of high voltage LiCoO2-based cells with 4-methylmorpholine-2,6-dione additive

Yue Zou, Jing Zhang, Jiande Lin, De-Yin Wu, Yong Yang, Jianming Zheng

Publisher page

Abstract

An novel electrolyte additive, 4-methylmorpholine-2,6-dione (MMD) with anhydride and amine functional groups, is come up with, which can not only construct a dense and stable cathode-electrolyte-interface (CEI) film on solid and electrolyte interphase that can automatically improve the cycling stability of lithium-ion batteries (LIBs) at high temperature and high voltage, but also effectively capture hydrofluoric acid and water in the electrolyte that can adequately inhibit carbonate decomposition and protect LiCoO 2 (LCO) internal structure. The capacity retention rate of Li||LCO cells increases from 65.8% to 83.5% after 200 cycles at 1C between 3.0 and 4.6 V after just adding a trace amount of 0.03% MMD to the baseline electrolyte. Even at ultra-high voltages of 4.7 V, the retained capacity of MMD-containing Li||LCO half-cell is improved from 91 to 122 mAh g −1 after 200 cycles at 1C. Both theoretical calculation and experiments reveal that MMD can be preferentially oxidized ahead of those solvent through C–C bond breaking to construct a thin and robust CEI layer on LCO surface. Such a combination of anhydride and amine functional groups opens up a direction to exploit novel electrolyte additives for prolonging the cycle life of higher energy density LCO.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Effect of fluorinated additives or co-solvent on performances of graphite//LiMn2O4 cells cycled at high potential10.1016/j.jechem.2020.04.030 ↗
2. Multifunctional high-efficiency additive with synergistic anion and cation coordination for high-performance LiNi0.8Co0.1Mn0.1O2 lithium metal batteries10.1021/acsami.1c14290 ↗
3. Towards greener and more sustainable batteries for electrical energy storage10.1038/nchem.2085 ↗
4. Tailoring grain boundary structures and Chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries10.1038/s41560-018-0191-3 ↗
5. Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6V10.1038/s41560-019-0409-z ↗
6. A novel trimethylsilyl 2-(fluorosulfonyl)difluoroacetate additive for stabilizing the Ni-rich LiNi0.9Co0.05Mn0.05O2/electrolyte interface10.1016/j.jpowsour.2021.230618 ↗
7. Electrochemical property enhancement of LiNi0.5Mn1.5O4 cathodes at high temperatures using 1,1,3,3-tetramethyldisiloxane10.1021/acsami.1c15137 ↗
8. Enabling stable high-voltage LiCoO2 operation by using synergetic interfacial modification strategy10.1002/adfm.202004664 ↗
9. High voltage operation of Ni-rich NMC cathodes enabled by stable electrode/electrolyte interphases10.1002/aenm.201800297 ↗
10. Stabilizing effect of 2-(triphenylphosphoranylidene) succinic anhydride as electrolyte additive on the lithium metal of lithium metal secondary batteries10.1016/j.electacta.2015.04.168 ↗
11. 4-Hydroxy-2-Butanesulfonic acid gamma-sultone as a bifunctional electrolyte additive for LiCoO2/graphite batteries with enhanced performances10.1021/acsaem.1c00688 ↗
12. An overview on the advances of LiCoO2 cathodes for lithium-ion batteries10.1002/aenm.202000982 ↗
13. Recent advances and historical developments of high voltage lithium cobalt oxide materials for rechargeable Li-ion batteries10.1016/j.jpowsour.2020.228062 ↗
14. Isatin anhydride as multifunctional film-forming additive to enhance cycle life of high-voltage Li-ion batteries at elevated temperature10.1016/j.jpowsour.2021.230361 ↗
15. Stabilizing LiCoO2/graphite at high voltages with an electrolyte additive10.1021/acsami.9b01053 ↗
16. Tailoring Co3d and O2p band centers to inhibit oxygen escape for stable 4.6 V LiCoO2 cathodes
17. Protective electrode/electrolyte interphases for high energy lithium-ion batteries with p-toluenesulfonyl fluoride electrolyte additive10.1016/j.jechem.2020.04.023 ↗
18. Enhanced cycle life and rate capability of single-crystal, Ni-rich LiNi0.9Co0.05Mn0.05O2 enabled by 1,2,4-1H-triazole additive10.1021/acsami.1c02043 ↗
19. Highly effective solid electrolyte interphase-forming electrolyte additive enabling high voltage lithium-ion batteries10.1021/acs.chemmater.7b01977 ↗
20. Optimizing interphase structure to enhance electrochemical performance of high voltage LiNi0.5Mn1.5O4 cathode via anhydride additives10.1016/j.cej.2021.128422 ↗
21. Stabilized cathode interphase for enhancing electrochemical performance of LiNi0.5Mn1.5O4-based lithium-ion battery via cis-1,2,3,6-tetrahydrophthalic anhydride10.1021/acsami.1c01979 ↗
22. A special enabler for boosting cyclic life and rate capability of LiNi0.8Co0.1Mn0.1O2: green and simple additive10.1016/j.nanoen.2019.104084 ↗
23. Benzoic anhydride as a bifunctional electrolyte additive for hydrogen fluoride capture and robust film construction over high-voltage Li-ion batteries10.1002/cssc.202100061 ↗
24. Dimethylacetamide as a film-forming additive for improving the cyclic stability of high voltage lithium-rich cathode at room and elevated temperature10.1016/j.electacta.2016.02.170 ↗
25. Interphase engineering by electrolyte additives for lithium-rich layered oxides: advances and perspectives10.1021/acsenergylett.1c00750 ↗
26. Stabilizing the LiCoO2 interface at high voltage with an electrolyte additive 2,4,6-Tris(4-fluorophenyl)boroxin10.1021/acssuschemeng.1c05936 ↗
27. Development of the colle-salvetti correlation-energy formula into a functional of the electro-density10.1103/PhysRevB.37.785 ↗
28. Contracted Guassian basis sets for molecular calculations, I. Second row atoms, Z=11-1810.1063/1.438980 ↗
29. Universal solvation model based on solute electron density and on a continuum model of the solvent defined by the bulk dielectric constant and atomic surface tensions10.1021/jp810292n ↗
30. Mechanism of cycling degradation and strategy to stabilize a nickel-rich cathode10.1039/C8TA03041C ↗
31. Effect of the damping function in dispersion corrected density functional theory10.1002/jcc.21759 ↗
32. Ab initio molecular dynamics for liquid metals10.1103/PhysRevB.47.558 ↗
33. Rationale for mixing exact exchange with density functional approximations10.1063/1.472933 ↗
34. First-principles prediction of redox potentials in transition-metal compounds with LDA + U10.1103/PhysRevB.70.235121 ↗
35. Trimethyl borate as film-forming electrolyte additive to improve high-voltage performances10.1021/acsami.9b03417 ↗
36. A novel bifunctional self-stabilized strategy enabling 4.6 V LiCoO2 with excellent long-term cyclability and high-rate capability10.1002/advs.201900355 ↗
37. Constructing a low-impedance interface on a high-voltage LiNi0.8Co0.1Mn0.1O2 cathode with 2,4,6-triphenyl boroxine as a film-forming electrolyte additive for Li-ion batteries10.1021/acsami.0c05623 ↗
38. Triethylborate as an electrolyte additive for high voltage layered lithium nickel cobalt manganese oxide cathode of lithium ion battery10.1016/j.jpowsour.2015.11.091 ↗
39. Construction of a stable LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode interface by a multifunctional organosilicon electrolyte additive10.1021/acsaem.9b02486 ↗