Predicting anisotropic thermophysical properties and spatially distributed heat generation rates in pouch lithium-ion batteries
Source abstract
Abstract
Abstract This paper proposes a novel thermal characterization approach to determine the specific heat capacity, anisotropic thermal conductivities, and spatially distributed heat generation rates of pouch lithium-ion batteries (LIBs) through a combined experimental and numerical simulation process. Unlike cylindrical LIBs, pouch LIBs subjected to high C-Rates exhibit non-uniform heat generation distributions due to the combined effect of their low impedance, large size, and internal structure. These thermophysical properties and distributed heat generation rates are crucial for designing, modeling, and assessing the performance of pouch-based battery thermal management systems. The proposed thermal characterization approach does not require expensive lab equipment and extensive details of the battery internal structure. Instead, it relies on simple battery experiments integrated with numerical modeling to predict these properties through inverse heat transfer simulations. The characterization approach accounts for non-uniform heat generation distribution through a geometric factor that discretizes the battery volume into three regions, and concentration factors that determine the percentage of the total heat generation rate in each region. Finally, the validation of the characterization approach and its accuracy is assessed with experimental data independent of that used in the characterization process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. 2021
2. BloombergNEF, Electric Vehicle Outlook 2020. https://about.bnef.com/electric-vehicle-outlook.
3. A review of novel thermal management systems for batteries10.1002/er.4095 ↗
4. 2020
5. Thermal behavior OF lithium-ion batteries: aging, heat generation, thermal management and failure10.5098/hmt.14.17 ↗
6. A control-oriented electrothermal model for pouch-type electric vehicle batteries
7. 2020
8. Experimental and theoretical investigations of heat generation rates for a water cooled LiFePO4 battery10.1016/j.ijheatmasstransfer.2016.05.126 ↗
9. Experimental investigation and simulation of temperature distributions in a 16Ah-LiMnNiCoO2 battery during rapid discharge rates10.1007/s00231-016-1870-x ↗
10. Panchal · 2016
11. Comparison of lumped diffusion models for voltage prediction of a lithium-ion battery cell during dynamic loads10.1016/j.jpowsour.2018.09.020 ↗
12. Development and evaluation of a new ammonia boiling based battery thermal management system10.1016/j.electacta.2018.05.093 ↗
13. Streamline three-dimensional thermal model of a lithium titanate pouch cell battery in extreme temperature conditions with module simulation10.1016/j.jpowsour.2017.09.028 ↗
14. Comparison of modeling predictions with experimental data from plastic lithium ion cells10.1149/1.1836921 ↗
15. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
16. Analytical, numerical and experimental determination of thermophysical properties of commercial 18650 LiCoO2 lithium-ion battery10.1149/2.0871514jes ↗
17. Novel thermal management system using boiling cooling for high-powered lithium-ion battery packs for hybrid electric vehicles10.1016/j.jpowsour.2017.07.067 ↗
18. Todys · 2020
19. Thermal characterization of large size lithium-ion pouch cell based on 1d electro-thermal model10.1016/j.jpowsour.2014.08.092 ↗
20. Thermal modeling of a high-energy prismatic lithium-ion battery cell and module based on a new thermal characterization methodology10.1016/j.est.2020.101707 ↗
21. Methodology to determine the heat capacity of lithium-ion cells10.1016/j.jpowsour.2018.05.084 ↗
22. Transient electrochemical heat transfer modeling and experimental validation of a large sized LiFePO4/graphite battery10.1016/j.ijheatmasstransfer.2017.03.005 ↗
23. Comparative assessment of new liquid-to-vapor type battery cooling systems10.1016/j.energy.2019.116010 ↗
24. A review on recent progress, challenges and perspective of battery thermal management system10.1016/j.ijheatmasstransfer.2020.120834 ↗
25. Gupta · 2019
26. A study on specific heat capacities of Li-ion cell components and their influence on thermal management10.1016/j.jpowsour.2016.10.049 ↗
27. Thermal behavior and electrochemical heat generation in a commercial 40 Ah lithium ion pouch cell10.1016/j.jpowsour.2015.03.170 ↗
28. Computational fluid dynamic simulations of a cavopulmonary assist device for failing Fontan circulation10.1016/j.jtcvs.2019.03.008 ↗
29. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
30. Predicting specific heat capacity and directional thermal conductivities of cylindrical lithium-ion batteries: a combined experimental and simulation framework10.1016/j.applthermaleng.2020.116075 ↗
31. S. Sang-sok Jung, Cap Asssembly and Secondary Battery Using the Same, US 2009/0117451 A1, 2009.
32. K. Tsuruta, M.E. Dermer, A Cell with a Tabless Electrode, US 2020/0144676 A1, 2020.
33. Thermal parameters determination of battery cells by local heat flux measurements10.1016/j.jpowsour.2014.07.117 ↗
34. Experimental study on the influence of temperature and state-of-charge on the thermophysical properties of an LFP pouch cell10.1016/j.jpowsour.2015.05.084 ↗