Sheet-type all-solid-state batteries with sulfidic electrolytes: Analysis of kinetic limitations based on a cathode morphology study
Source abstract
Abstract
Abstract All-solid-state batteries (ASSBs) with sulfide-based solid electrolytes (SEs) promise to boost the energy density of future Li-ion batteries. Still little is known about the influence of cathode morphology and charge transport/transfer processes inside the cathode on battery performance. We report on a morphological investigation of two ASSB cathodes prepared by the industrially relevant sheet-type approach. Both employ state-of-the-art NMC 85|05|10 as cathode active material (CAM) and sulfide-based SEs differing in morphology and intrinsic ionic conductivity, i.e., β-Li3PS4 (small mesoporous particles, conductivity: 0.2 mS cm−1) and 2 Li3PS4∙LiI (large nonporous particles, conductivity: 0.8 mS cm−1). We apply focused ion-beam scanning electron microscopy to obtain high-resolution reconstructions, allowing to differentiate between CAM, SE, and voids and to conduct a morphological analysis of each phase as well as a simulation of ion transport in the SE phase. Based on morphological data, kinetic limitations in the cathodes are analyzed using a transmission-line model, indicating that charge transfer resistance at the CAM–SE interface is the dominating contribution, while resistances due to Li-ion migration in the SE and Li chemical diffusion in the CAM are considerably lower. Reducing charge transfer resistance at the CAM–SE interface is therefore a key to improving ASSB performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. A solid future for battery development10.1038/nenergy.2016.141 ↗
2. A review of lithium and non-lithium based solid state batteries10.1016/j.jpowsour.2015.02.054 ↗
3. Batteries: getting solid10.1038/nenergy.2016.42 ↗
4. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
5. The impact of elastic deformation on deposition kinetics at lithium/polymer interfaces10.1149/1.1850854 ↗
6. Development of an all-solid-state lithium battery by slurry-coating procedures using a sulfidic electrolyte10.1016/j.ensm.2018.11.011 ↗
7. Crystal structure of garnet-related Li-ion conductor Li7-3xGaxLa3Zr2O12: fast Li-ion conduction caused by a different cubic modification?10.1021/acs.chemmater.6b00038 ↗
8. Slurry-fabricable Li+-conductive polymeric binders for practical all-solid-state lithium-ion batteries enabled by solvate ionic liquids10.1002/aenm.201802927 ↗
9. Fundamentals of inorganic solid-state electrolytes for batteries10.1038/s41563-019-0431-3 ↗
10. Solvent-engineered design of argyrodite Li6PS5X (X = Cl, Br, I) solid electrolytes with high ionic conductivity10.1021/acsenergylett.8b01997 ↗
11. Vacancy-controlled Na+ superion conduction in Na11Sn2PS1210.1002/anie.201712769 ↗
12. Inducing high ionic conductivity in the lithium superionic argyrodites Li6+xP1-xGexS5I for all-solid-state batteries10.1021/jacs.8b10282 ↗
13. A new family of argyrodite thioantimonate lithium superionic conductors10.1021/jacs.9b08357 ↗
14. A lithium superionic conductor10.1038/nmat3066 ↗
15. All-solid-state lithium batteries with sulfide electrolytes and oxide cathodes10.1007/s41918-020-00081-4 ↗
16. Insights on the fundamental lithium storage behavior of all-solid-state lithium batteries containing the LiNi0.8Co0.15Al0.05O2 cathode and sulfide electrolyte10.1016/j.jpowsour.2016.01.039 ↗
17. Lithium/sulfide all-solid-state batteries using sulfide electrolytes
18. Liquid-phase syntheses of sulfide electrolytes for all-solid-state lithium battery10.1038/s41570-019-0078-2 ↗
19. Annealing-induced vacancy formation enables extraordinarily high Li+ ion conductivity in the amorphous electrolyte 0.33 LiI + 0.67 Li3PS410.1016/j.ssi.2019.115040 ↗
20. Superionic glass-ceramic electrolytes for room-temperature rechargeable sodium batteries10.1038/ncomms1843 ↗
21. Correlating the interface resistance and surface adhesion of the Li metal-solid electrolyte interface10.1016/j.jpowsour.2017.11.078 ↗
22. Li6PS5X: a class of crystalline Li-rich solids with an unusually high Li+ mobility10.1002/anie.200703900 ↗
23. Anomalous high ionic conductivity of nanoporous β-Li3PS410.1021/ja3110895 ↗
24. High active material loading in all-solid-state battery electrode via particle size optimization
25. Nuclear spin relaxation in nanocrystalline β-Li3PS4 reveals low-dimensional Li diffusion in an isotropic matrix10.1021/acs.chemmater.8b02753 ↗
26. Flow-oriented synthesis of Li2S and Li3PS4·3THF: opening up a completely solvent-based solid electrolyte value chain10.1021/acsaem.0c01007 ↗
27. J. Schmedt auf der Günne, S. Dehnen, B. Roling, Li10SnP2S12: an affordable lithium superionic conductor10.1021/ja407393y ↗
28. Solution-processable glass LiI-Li4SnS4 superionic conductors for all-solid-state Li-ion batteries10.1002/adma.201505008 ↗
29. Infiltration of solution-processable solid electrolytes into conventional Li-ion-battery electrodes for all-solid-state Li-ion batteries10.1021/acs.nanolett.7b00330 ↗
30. Slurry-based processing of solid electrolytes: a comparative binder study10.1149/2.0961816jes ↗
31. Understanding chemical stability issues between different solid electrolytes in all-solid-state batteries10.1149/2.0351906jes ↗
32. Design strategies, practical considerations, and new solution processes of sulfide solid electrolytes for all-solid-state batteries10.1002/aenm.201800035 ↗
33. All-solid-state lithium-ion and lithium metal batteries – paving the way to large-scale production10.1016/j.jpowsour.2018.02.062 ↗
34. All-solid-state batteries with slurry coated LiNi0.8Co0.1Mn0.1O2 composite cathode and Li6PS5Cl electrolyte: effect of binder content10.1016/j.jpowsour.2018.04.069 ↗
35. Chemo-mechanical expansion of lithium electrode materials – on the route to mechanically optimized all-solid-state batteries10.1039/C8EE00907D ↗
36. Microstructural modeling of composite cathodes for all-solid-state batteries10.1021/acs.jpcc.8b11043 ↗
37. Modeling effective ionic conductivity and binder influence in composite cathodes for all-solid-state batteries10.1021/acsami.9b22788 ↗
38. The influence of void space on ion transport in a composite cathode for all-solid-state batteries10.1016/j.jpowsour.2018.06.041 ↗
39. Influence of electronically conductive additives on the cycling performance of argyrodite-based all-solid-state batteries10.1039/C9RA10253A ↗
40. All-solid-state battery electrode sheets prepared by a slurry10.1149/2.0951712jes ↗
41. Impact of cathode material particle size on the capacity of bulk-type all-solid-state batteries10.1021/acsenergylett.8b00275 ↗
42. Operando visualization of morphological dynamics in all-solid-state batteries10.1002/aenm.201901547 ↗
43. Analysis of interfacial effects in all-solid-state batteries with thiophosphate solid electrolytes10.1021/acsami.9b21404 ↗
44. Characterization of mechanical degradation in an all-solid-state battery cathode10.1039/D0TA06985J ↗
45. Quantitative analysis of microstructures and reaction Interfaces on composite cathodes in all-solid-state batteries using a three-dimensional reconstruction technique10.1021/acsami.8b04204 ↗
46. Chemically evolved composite lithium-ion conductors with lithium thiophosphates and nickel sulfides10.1021/acsenergylett.7b00497 ↗
47. Finite-size effects in the 3D reconstruction and morphological analysis of porous polymers, Mater
48. The detrimental effects of carbon additives in solid-state batteries using Li10GeP2S12 as solid electrolyte10.1021/acsami.7b11530 ↗
49. Interfacial processes and influence of composite cathode microstructure controlling the performance of all-solid-state lithium batteries10.1021/acsami.7b01137 ↗
50. Capacity fade in solid-state batteries: interphase formation and chemomechanical processes in nickel-rich layered oxide cathodes and lithium thiophosphate solid electrolytes10.1021/acs.chemmater.7b00931 ↗
51. Visualization of the interfacial decomposition of composite cathodes in argyrodite-based all-solid-state batteries using time-of-flight secondary-ion mass spectrometry10.1021/acs.chemmater.9b00770 ↗
52. On the influence of carbon additives on the decomposition pathways in thiophosphate-based all-solid-state batteries10.1021/acs.chemmater.0c01825 ↗
53. Redox-active cathode interphases in solid-state batteries10.1039/C7TA07641J ↗
54. The stabilizing effect of a hybrid surface coating on Ni-rich NCM cathode material in all-solid-state batteries10.1021/acs.chemmater.9b02947 ↗
55. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
56. A pyramid approach to subpixel registration based on intensity10.1109/83.650848 ↗
57. Stripe and ring artifact removal with combined wavelet-Fourier filtering10.1364/OE.17.008567 ↗
58. MorphoLibJ: integrated library and plugins for mathematical morphology with ImageJ10.1093/bioinformatics/btw413 ↗
59. A threshold selection method from gray-level histograms10.1109/TSMC.1979.4310076 ↗
60. Correlation of anisotropy and directional conduction in β-Li3PS4 fast Li+ conductor
61. Marching cubes: a high resolution 3D surface construction algorithm10.1145/37402.37422 ↗
62. Detailed microstructure analysis and 3D simulations of porous electrodes10.1149/1.3570232 ↗
63. Microstructural feature analysis of commercial Li-ion battery cathodes by focused ion beam tomography10.1016/j.jpowsour.2019.04.019 ↗
64. Bourke · 1994
65. Simulating solute transport in porous or fractured formations using random walk particle tracking: a review10.2136/vzj2004.0125 ↗
66. Tracer-size-dependent pore space accessibility and long-time diffusion coefficient in amorphous, mesoporous silica10.1021/acs.jpcc.7b00264 ↗
67. Taylor dispersion in porous media. Determination of the dispersion tensor10.1063/1.858751 ↗
68. Boundary conditions for stochastic solutions of the convection-diffusion equation10.1103/PhysRevE.68.036704 ↗
69. A Li-rich layered sulfide as cathode active material in all-solid-state Li-metal batteries10.1021/acsami.9b22937 ↗
70. Li-ion dynamics in β-Li3PS4 observed by NMR – local hopping and long-range transport10.1021/acs.jpcc.8b05431 ↗
71. Application of rod-like Li6PS5Cl directly synthesized by a liquid phase process to sheet-type electrodes for all-solid-state lithium batteries10.1149/2.0301903jes ↗
72. High-conductivity argyrodite Li6PS5Cl solid electrolytes prepared via optimized sintering processes for all-solid-state lithium-sulfur batteries10.1021/acsami.8b15121 ↗
73. Chord-length distribution function for two-phase random media10.1103/PhysRevE.47.2950 ↗
74. Topological analysis of non-granular, disordered porous media: determination of pore connectivity, pore coordination, and geometric tortuosity in physically reconstructed silica monoliths10.1039/C5NJ02814K ↗
75. Reconstruction–simulation approach verifies impedance-derived ion transport tortuosity of a graphite battery electrode10.1149/2.0711813jes ↗
76. Tortuosity determination of battery electrodes and separators by impedance spectroscopy10.1149/2.1141607jes ↗
77. A review of conduction phenomena in Li-ion batteries10.1016/j.jpowsour.2010.06.060 ↗
78. Tortuosity in porous media: a critical review10.2136/sssaj2012.0435 ↗
79. Effective diffusion coefficient in porous media10.1063/1.1729783 ↗
80. Tortuosity of porous particles10.1021/ac071377r ↗
81. Structure-transport correlation for the diffusive tortuosity of bulk, monodisperse, random sphere packings10.1016/j.chroma.2011.07.066 ↗
82. Theory of impedance response of porous electrodes: simplifications, inhomogeneities, non-stationarities and applications10.1149/2.0901609jes ↗
83. Optimized temperature effect of Li-ion diffusion with layer distance in Li(NixMnyCoz)O2 cathode materials for high performance Li-ion battery10.1002/aenm.201501309 ↗
84. Kinetics tuning of Li-ion diffusion in layered Li(NixMnyCoz)O210.1021/jacs.5b04040 ↗
85. The indium−lithium electrode in solid‐state lithium‐ion batteries: phase formation, redox potentials, and interface stability10.1002/batt.201800149 ↗
86. Understanding the lifetime of battery cells based on solid-state Li6PS5Cl electrolyte paired with lithium metal electrode10.1021/acsami.9b22629 ↗
87. Assessing the ion transport properties of highly concentrated non‐flammable electrolytes in a commercial Li‐ion battery cell10.1002/batt.201900111 ↗
88. Thickness‐dependent impedance of composite battery electrodes containing ionic liquid‐based electrolytes10.1002/batt.202000023 ↗
89. Fabrication of electrode-electrolyte interfaces in all-solid-state rechargeable lithium batteries by using a supercooled liquid state of the glassy electrolytes10.1039/C0JM01090A ↗