Sodium and lithium incorporated cathode materials for energy storage applications - A focused review
Source abstract
Abstract
The idea of lithium (Li)/sodium (Na) incorporated cathodes for both Li/Na-ion batteries has gained significant consideration throughout the past decade. The encouraging performance of various reported Li/Na incorporated cathode systems has the potential to review their exciting developments made so far to clearly understand the effect of numerous variables in improving the electrochemical performance. The current manuscript provides a focused review on the synthesis and electrochemical performance of these Li/Na incorporated cathode materials for Na/Li-ion batteries. Furthermore, the ruling mechanisms affecting the electrochemical performance of Li/Na incorporated cathode materials have been summarized. The majority of the synthesized Li/Na incorporated cathodes demonstrate good electrochemical cyclic stability, capacity retention, rate capability, charge/discharge capacity, etc. Li incorporated Na-based cathodes, show improved performance that can be attributed to the prevention of phase transformation at high voltages and loss of transition metal from the cathode. In the case of Na addition to Li-based cathodes, the Na pillaring effect significantly improves the Li interface layer stability, increases Li-ion diffusion, and retardation of Li and/or transition metal disordering. Various factors affecting the performance of Li/Na incorporated cathode families have been discussed that can be taken into account for development of future novel cathode materials demonstrating decent performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Electrodeposition of n-CdSe/p-Cu2Se heterojunction solar cells10.30919/es8d1124 ↗
2. Nanostructured and heterostructured 2D materials for thermoelectrics10.30919/es8d1136 ↗
3. Photoelectrochemical investigation on the cadmium sulfide (CdS) thin films prepared using spin coating technique10.30919/esmm5f1041 ↗
4. Research progress on catalytic pyrolysis and reuse of waste plastics and petroleum sludge10.30919/esmm5f415 ↗
5. Mercurochrome Sensitized ZnO/In2O3 Photoanode for Dye-Sensitized Solar Cell10.30919/esee8c720 ↗
6. High-efficient and Low-Cost H2 Production by Solar-Driven Photo-Thermo-Reforming of Methanol with CuO Catalyst10.30919/esee8c722 ↗
7. Recent Advances in Organic/Composite Phase Change Materials for Energy Storage10.30919/esee8c150 ↗
8. Ink-based 3D printing technologies for graphene-based materials: a review10.1007/s42114-018-0067-9 ↗
9. Facile synthesis of LiMn0.75Fe0.25PO4/C nanocomposite cathode materials of lithium-ion batteries through microwave sintering10.30919/es5e1006 ↗
10. Experimental and theoretical characteristic of single atom Co-N-C catalyst for Li-O2 batteries
11. Higher voltage redox flow batteries with hybrid acid and base electrolytes10.30919/es8d1118 ↗
12. Recent advances in Co3O4 as anode materials for high-performance lithium-ion batteries10.30919/es8d1128 ↗
13. A novel core-shell structured nickel-rich layered cathode material for high-energy lithium-ion batteries10.30919/es8d502 ↗
14. Facile Synthesis of SnO Nanorods for Na-Ion Batteries10.30919/esee8c198 ↗
15. Cobalt-doping enhancing electrochemical performance of silicon/carbon nanocomposite as highly efficient anode materials in lithium-ion batteries10.30919/es8d798 ↗
16. A promising cathode for Li-ion batteries: Li3V2(PO4)310.1016/j.ensm.2016.02.002 ↗
17. A review of lithium-ion battery for electric vehicle applications and beyond
18. Li-ion battery materials: present and future10.1016/j.mattod.2014.10.040 ↗
19. Lithium availability and future production outlooks10.1016/j.apenergy.2013.04.005 ↗
20. Research development on sodium-ion batteries10.1021/cr500192f ↗
21. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
22. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
23. How comparable are sodium-ion batteries to lithium-ion counterparts?10.1021/acsenergylett.0c02181 ↗
24. Sodium and sodium-ion energy storage batteries10.1016/j.cossms.2012.04.002 ↗
25. Enabling sodium batteries using lithium-substituted sodium layered transition metal oxide cathodes10.1002/aenm.201000061 ↗
26. Insights into the improved high-voltage performance of Li-incorporated layered oxide cathodes for sodium-ion batteries
27. Effects of Na substitution on Li ion migration in Li 2 CoSiO 4 cathode material10.1149/2.065304jes ↗
28. Synthesis and characterization of Na-substituted LiMnPO4 as a cathode material for improved lithium ion batteries10.1016/j.jallcom.2018.10.161 ↗
29. Hierarchically porous Co/C nanocomposites for ultralight high-performance microwave absorption10.1007/s42114-020-00202-z ↗
30. Review on the electromagnetic interference shielding properties of carbon based materials and their novel composites: recent progress, challenges and prospects10.1016/j.carbon.2021.01.124 ↗
31. Core/shell template-derived Co, N-doped carbon bifunctional electrocatalysts for rechargeable Zn-air battery10.30919/es8d768 ↗
32. NH3-activated fullerene derivative hierarchical microstructures to porous Fe3O4/N-C for oxygen reduction reaction and Zn-air battery10.30919/es8d1311 ↗
33. Dual-gradient enabled ultrafast biomimetic snapping of hydrogel materials10.1126/sciadv.aav7174 ↗
34. Identifying the critical role of li substitution in P2-Na x[LiyNizMn1-y-Z]O2 (0 < x, y, z < 1) intercalation cathode materials for high-energy na-ion batteries10.1021/cm403855t ↗
35. Electrochemical intercalation of sodium in NaxCoO2 bronzes10.1016/0167-2738(81)90076-X ↗
36. Layered Na2RuO3 as a cathode material for Na-ion batteries10.1016/j.elecom.2013.04.011 ↗
37. Anionic redox chemistry in Na-rich Na 2 Ru 1−y Sn y O 3 positive electrode material for Na-ion batteries10.1016/j.elecom.2015.02.001 ↗
38. Na2MnO3 as cathode materials for Na ion batteries: from first-principles investigations10.1016/j.ssi.2018.02.039 ↗
39. Improving energy density and structural stability of manganese oxide cathodes for Na-ion batteries by structural lithium substitution10.1021/acs.chemmater.6b04078 ↗
40. New O2/P2-type Li-excess layered manganese oxides as promising multi-functional electrode materials for rechargeable Li/Na batteries10.1002/aenm.201301453 ↗
41. Structural and electrochemical evidence of layered to spinel phase transformation of Li and Mn rich layered cathode materials of the formulae xLi[Li 1/3 Mn 2/3 ]O 2 .(1-x)LiMn 1/3 Ni 1/3 Co 1/3 O 2 (x = 0.2, 0.4, 0.6) upon cycling10.1149/2.0101410jes ↗
42. Electrochemical investigation of the P2-NaxCoO2 phase diagram10.1038/nmat2920 ↗
43. P2-type Nax [Fe1/2 Mn1/2[O2 made from earth-abundant elements for rechargeable Na batteries10.1038/nmat3309 ↗
44. Can All the Lithium be Removed from T2-Li[sub 2/3][Ni[sub 1/3]Mn[sub 2/3]]O[sub 2]?10.1149/1.1376116 ↗
45. In Situ X-Ray Diffraction Study of P2-Na[sub 2/3][Ni[sub 1/3]Mn[sub 2/3]]O[sub 2]10.1149/1.1407247 ↗
46. Enhanced electrochemical performance of iron-manganese based cathode by Li doping for sodium-ion batteries10.1016/j.electacta.2018.09.192 ↗
47. Layered oxide cathodes for sodium-ion batteries: phase transition, air stability, and performance
48. Design of high-performance cathode materials with single-phase pathway for sodium ion batteries: a study on P2-Nax(LiyMn1-y)O2 compounds10.1016/j.jpowsour.2017.12.072 ↗
49. Lithium-doping stabilized high-performance P2-Na0.66Li0.18Fe0.12Mn0.7O2 cathode for sodium ion batteries10.1021/jacs.9b01855 ↗
50. High-capacity P2-type Na x Li 0.25 Mn 0.75 O 2 cathode enabled by anionic oxygen redox10.1149/2.0611916jes ↗
51. Li‐doping stabilized P2‐Li 0.2 Na 1.0 Mn 0.8 O 2 sodium ion cathode with oxygen redox activity10.1002/er.5120 ↗
52. Improving Na + diffusion and performance of P2-type layered Na 0.6 Li 0.07 Mn 0.66 Co 0.17 Ni 0.17 O 2 by expanding the interplanar spacing10.1021/acsami.0c14931 ↗
53. P2-type Na0.8(Li0.33Mn0.67-xTix)O2 doped by Ti as cathode materials for high performance sodium-ion batteries10.1016/j.jallcom.2019.152402 ↗
54. Li and Ti Co-doping to stabilize slabs of high-voltage P2-type Na0.560[Li0.041Mn0.642Ni0.221Ti0.095]O210.1016/j.jallcom.2020.153938 ↗
55. Layered-spinel capped nanotube assembled 3D Li-rich hierarchitectures for high performance Li-ion battery cathodes10.1039/C6TA05676H ↗
56. Influence of cationic substitutions on the oxygen loss and reversible capacity of lithium-rich layered oxide cathodes10.1021/jp200375d ↗
57. Study on the reversible electrode reaction of Na 1-xNi 0.5Mn 0.5O 2 for a rechargeable sodium-ion battery10.1021/ic300357d ↗
58. Novel titanium-based O3-type NaTi0.5Ni0.5O2 as a cathode material for sodium ion batteries10.1039/C3CC47351A ↗
59. Electrochemical Na-deintercalation from NaVO210.1149/1.3555102 ↗
60. Synthesis, structure, and electrochemical properties of the layered sodium insertion cathode material: NaNi 1/3Mn 1/3Co 1/3O 210.1021/cm300466b ↗
61. P2-type Na0.67Mn0.65Fe0.2Ni 0.15O2 cathode material with high-capacity for sodium-ion battery10.1016/j.electacta.2013.10.211 ↗
62. P2-type Nax [Fe1/2 Mn1/2[O2 made from earth-abundant elements for rechargeable Na batteries10.1038/nmat3309 ↗
63. High performance Na0.5[Ni0.23Fe0.13Mn0.63]O2 cathode for sodium-ion batteries10.1002/aenm.201400083 ↗
64. Lithium-substituted sodium layered transition metal oxide fibers as cathodes for sodium-ion batteries10.1016/j.ensm.2015.09.005 ↗
65. Exploring Li substituted O3-structured layered oxides NaLixNi1/3 - XMn1/3 + xCo1/3 - XO2 (x = 0.07, 0.13, and 0.2) as promising cathode materials for rechargeable Na batteries10.1016/j.elecom.2015.07.023 ↗
66. Co-free layered cathode materials for high energy density lithium-ion batteries10.1021/acsenergylett.0c00742 ↗
67. A new O3-type layered oxide cathode with high energy/power density for rechargeable Na batteries10.1039/C4CC09760B ↗
68. Synthesis, structural, and transport properties of novel bihydrated fluorosulphates NaMSO4F 2H2O (M=Fe, Co, and Ni)10.1021/cm1010482 ↗
69. Prototype sodium-ion batteries using an air-stable and Co/Ni-free O3-layered metal oxide cathode10.1002/adma.201502449 ↗
70. Structural classification and properties of the layered oxides10.1016/0378-4363(80)90214-4 ↗
71. Layered Na-ion cathodes with outstanding performance resulting from the synergetic effect of mixed P- and O-type phases10.1002/aenm.201501555 ↗
72. Layered P2-Na2/3[Ni1/3Mn2/3]O2 as high-voltage cathode for sodium-ion batteries: the capacity decay mechanism and Al2O3 surface modification10.1016/j.nanoen.2016.06.026 ↗
73. O3-type layered transition metal oxide Na(NiCoFeTi)1/4O2 as a high rate and long cycle life cathode material for sodium ion batteries10.1039/C5TA05769H ↗
74. Intermediate honeycomb ordering to trigger oxygen redox chemistry in layered battery electrode10.1038/ncomms11397 ↗
75. Improved electrochemical performance of Fe-substituted NaNi0.5Mn0.5O2 cathode materials for sodium-ion batteries10.1021/acsami.5b00594 ↗
76. Identifying the structural basis for the increased stability of the solid electrolyte interphase formed on silicon with the additive fluoroethylene carbonate10.1021/jacs.7b06834 ↗
77. High capacity O3-type Na[Li0.05(Ni0.25Fe0.25Mn0.5)0.95]O2 cathode for sodium ion batteries10.1021/cm502481b ↗
78. Crystal structures and electrode performance of alpha-NaFeO2 for rechargeable sodium batteries10.5796/electrochemistry.80.716 ↗
79. New insight into Na intercalation with Li substitution on alkali site and high performance of O3-type layered cathode material for sodium ion batteries10.1039/C8TA06159A ↗
80. Layered P2/O3 intergrowth cathode: toward high power Na-ion batteries10.1002/aenm.201400458 ↗
81. Evolution structurale et proprietes physiques des phases AXMO2 (A = Na, K; M = Cr, Mn, Co) (x ⩽ 1)10.1016/0025-5408(75)90166-X ↗
82. Voltage, stability and diffusion barrier differences between sodium-ion and lithium-ion intercalation materials10.1039/c1ee01782a ↗
83. A Co‐ and Ni‐free P2/O3 biphasic lithium stabilized layered oxide for sodium‐ion batteries and its cycling behavior10.1002/adfm.202003364 ↗
84. A layered P2- and O3-type composite as a high-energy cathode for rechargeable sodium-ion batteries10.1002/anie.201411788 ↗
85. Recent achievements on polyanion-type compounds for sodium-ion batteries: syntheses, crystal chemistry and electrochemical performance10.1016/j.jpowsour.2017.07.002 ↗
86. Sodium intercalation/de-intercalation mechanism in Na4MnV(PO4)3 cathode materials10.1016/j.electacta.2018.09.111 ↗
87. Na2FeP2O7 as a promising iron-based pyrophosphate cathode for sodium rechargeable batteries: a combined experimental and theoretical study10.1002/adfm.201201589 ↗
88. A mixed iron-manganese based pyrophosphate cathode, Na2Fe0.5Mn0.5P2O7, for rechargeable sodium ion batteries10.1039/C5CP06836C ↗
89. Insight into the limited electrochemical activity of NaVP2O710.1039/C5RA12158B ↗
90. Lithium battery materials LiMPO4 (M = Mn, Fe, Co, and Ni): insights into defect association, transport mechanisms, and doping behavior10.1021/cm801262x ↗
91. Synergistic effects of transition metal substitution in conversion electrodes for lithium-ion batteries10.1039/c0jm03880f ↗
92. Effect of electrode structure on performance of Si anode in Li-ion batteries: Si particle size and conductive additive10.1016/j.jpowsour.2004.07.032 ↗
93. Role of surface coating on cathode materials for lithium-ion batteries10.1039/c0jm00154f ↗
94. Synthesis and performance evaluation of Na (2‐x) Li x FeP 2 O 7 (x=0, 0.6) hybrid cathodes10.1002/slct.202003658 ↗
95. Lithium-ion rechargeable batteries with LiCoO2 and carbon electrodes: the LiCoO2/C system10.1016/0167-2738(94)90411-1 ↗
96. Development of structural stability and the electrochemical performances of “La” substituted spinel LiMn2O4 cathode materials for rechargeable lithium-ion batteries10.1016/j.ssi.2008.04.010 ↗
97. Powder property and electrochemical characterization of Li2MnO3 material10.1016/j.matchemphys.2006.12.008 ↗
98. Electrochemical Activities in Li[sub 2]MnO[sub 3]10.1149/1.3110803 ↗
99. Study of the electrochemical behavior of the “inactive” Li 2MnO 310.1016/j.electacta.2012.05.144 ↗
100. Synthesis of lithium manganese oxide nanocomposites using microwave‐assisted chemical precipitation technique and their performance evaluation in lithium‐ion batteries10.1002/est2.202 ↗