journal article·2021-03Open access

Sensor development and optimization for a proton exchange membrane fuel cell system in automotive applications

Hanqing Wang, Simon Morando, Arnaud Gaillard, Daniel Hissel

Abstract

Abstract This paper is on the subject of sensor development and sensor-set size optimization approaches for Proton Exchange Membrane Fuel Cell (PEMFC) system in Fuel Cell Electric Vehicles (FCEV) applications. Sensors are classified as physical sensors and gas sensors. Physical sensors are used to detect signals (pressure, mass flow, etc.) which are related to PEMFC system operating state and control. Gas sensors consist of the hydrogen leakage detector for safety reasons and the environment sensor system which is built with various gas sensors to detect gas contaminations (COx, SOx, etc.). Depending on the sensor development review and the sensor specifications comparisons, sensors owning low cost, small volume, fast response, high resolution, excellent stability and durability are favored in FCEV applications. Nevertheless, numerous sensors result in the increase of system complexity, cost, and even the reduction of effectiveness for the fuel cell prognostics and health management algorithms. Thus, sensor-set size optimization and capability validation approaches (model-based, data-driven and hybrid) are reviewed in detail. As a result, a sensor-set size optimization framework is proposed. Some future work on fuel cell sensor system development and optimization is also suggested to facilitate the move towards commercialization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Fuel Cells and Related Materials · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Diagnostic & health management of fuel cell systems: issues and solutions10.1016/j.arcontrol.2016.09.005 ↗
2. Multi-objective component sizing based on optimal energy management strategy of fuel cell electric vehicles10.1016/j.apenergy.2015.02.017 ↗
3. A review of DC/DC converter-based electrochemical impedance spectroscopy for fuel cell electric vehicles10.1016/j.renene.2019.03.130 ↗
4. Fuel cell operation under degraded working modes and study of diode by-pass circuit dedicated to multi-stack association10.1016/j.enconman.2007.10.007 ↗
5. Environmental sensor system for expanded capability of PEM fuel cell use in high air contaminant conditions10.1016/j.ijhydene.2018.10.138 ↗
6. Developments in gas sensor technology for hydrogen safety10.1016/j.ijhydene.2014.05.042 ↗
7. The effect of ambient contamination on PEMFC performance10.1016/j.jpowsour.2006.12.103 ↗
8. The impact of air contaminants on PEMFC performance and durability10.1016/j.jpowsour.2007.12.091 ↗
9. A review of PEM hydrogen fuel cell contamination: impacts, mechanisms, and mitigation10.1016/j.jpowsour.2006.12.012 ↗
10. Bosch GmbH · 2014
11. Gatty · 2015
12. Solid state gas sensor research in Germany–a status report10.3390/s90604323 ↗
13. Selection of optimal sensors for predicting performance of polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2016.08.021 ↗
14. Effectiveness of a novel sensor selection algorithm in PEM fuel cell on-line diagnosis10.1109/TIE.2018.2795558 ↗
15. Polymer electrolyte membrane fuel cell fault diagnosis and sensor abnormality identification using sensor selection method10.1016/j.jpowsour.2019.227394 ↗
16. Fault detection and assessment for solid oxide fuel cell system gas supply unit based on novel principal component analysis10.1016/j.jpowsour.2019.226864 ↗
17. Direct remaining useful life estimation based on support vector regression10.1109/TIE.2016.2623260 ↗
18. Hissel · 2013
19. Suzuki, T., & Tsutsui, M. U.S. Patent No. 4,829,814. Washington, DC: U.S. Patent and Trademark Office (1989).
20. Stoltman, D. D., Kabasin, D. F., & Field, M. J. U.S. Patent No. 4,445,369. Washington, DC: U.S. Patent and Trademark Office (1984).
21. Air flow meter 8. Generation: a modular approach for new diesel system challenges
22. Experimental study of gasoline-ethanol-hydrogen blends combustion in an SI engine10.1016/j.ijhydene.2017.07.014 ↗
23. Mikulla, V. U.S. Patent No. 4,025,891. Washington, DC: U.S. Patent and Trademark Office (1977).
24. Ueno, S., Sato, K., Oyama, Y., Nishimura, Y., & Miya, K. U.S. Patent No. 4,369,656. Washington, DC: U.S. Patent and Trademark Office (1983).
25. Takahashi, M., Tokuda, H., Suzuki, T., Takada, M., & Kooriyama, T. U.S. Patent No. 4,790,182. Washington, DC: U.S. Patent and Trademark Office (1988).
26. Gilles · 2012
27. Miyoshi, N., Tsuruoka, M., & Nagumo, M. U.S. Patent No. 4,584,883. Washington, DC: U.S. Patent and Trademark Office (1986).
28. 2020
29. A combined ultrasonic flow meter and binary vapour mixture analyzer for the ATLAS silicon tracker10.1088/1748-0221/8/02/P02006 ↗
30. FTI Flow Technology
31. Zimmerman, D. J., & Dorman, F. D. U.S. Patent No. 5,325,728. Washington, DC: U.S. Patent and Trademark Office (1994).
32. Morita, Y., Katayama, M., & Kato, T. U.S. Patent No. 4,648,281. Washington, DC: U.S. Patent and Trademark Office (1987).
33. Turbine flowmeters: II. Theoretical and experimental published information10.1016/0955-5986(93)90048-N ↗
34. Friese, K. H., Stecher, G., & Wiedenmann, H. M. U.S. Patent No. 5,142,266. Washington, DC: U.S. Patent and Trademark Office (1992).
35. Amphenol Advanced Sensors
36. 2020
37. A high-speed capacitive humidity sensor with on-chip thermal reset10.1109/16.830983 ↗
38. A polyimide-based capacitive humidity sensor10.1109/T-ED.1985.22104 ↗
39. Capacitive humidity sensor design based on anodic aluminum oxide10.1016/j.snb.2009.07.007 ↗
40. Thick films of copper-titanate resistive humidity sensor10.1016/j.snb.2005.02.010 ↗
41. Room temperature ultra-sensitive resistive humidity sensor based on single zinc oxide nanowire10.1016/j.sna.2012.05.041 ↗
42. Humidity sensors principle, mechanism, and fabrication technologies: a comprehensive review10.3390/s140507881 ↗
43. Organic thin‐film capacitive and resistive humidity sensors: a focus review10.1002/admi.201800969 ↗
44. 2020
45. Azbil Corporation
46. Silicon pressure sensor integrates resonant strain gauge on diaphragm10.1016/0924-4247(90)85028-3 ↗
47. Thin film thermocouples for in situ membrane electrode assembly temperature measurements in a polybenzimidazole-based high temperature proton exchange membrane unit cell10.1016/j.jpowsour.2010.02.018 ↗
48. Determination of effective water vapor diffusion coefficient in pemfc gas diffusion layers10.1016/j.ijhydene.2011.01.036 ↗
49. 2020
50. The effect of the thermal prong—wire interaction on the response of a cold wire in gaseous flows (air, argon and helium)10.1017/S0022112082002584 ↗
51. The vortex flowmeter: various methods of investigating phenomena10.1088/0957-0233/16/3/R01 ↗
52. A polyimide-based capacitive humidity sensor10.1109/T-ED.1985.22104 ↗
53. Feyh, A., Graham, A., Samarao, A., Yama, G., & O'brien, G. U.S. Patent No. 9,588,073. Washington, DC: U.S. Patent and Trademark Office (2017).
54. Demisch · 1991
55. In-fibre Bragg grating sensors for distributed temperature measurement in a polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2009.03.021 ↗
56. In situ measurement of relative humidity in a PEM fuel cell using fibre Bragg grating sensors10.1016/j.ijhydene.2014.08.010 ↗
57. In-situ measurement of temperature and humidity distribution in gas channels for commercial-size proton exchange membrane fuel cells10.1016/j.jpowsour.2018.12.008 ↗
58. Use of flexible micro-temperature sensor to determine temperature in situ and to simulate a proton exchange membrane fuel cell10.1016/j.jpowsour.2010.06.051 ↗
59. In situ measurement of temperature distribution in proton exchange membrane fuel cell I a hydrogen–air stack10.1016/j.jpowsour.2012.11.027 ↗
60. Embedded flexible micro-sensors in MEA for measuring temperature and humidity in a micro-fuel cell10.1016/j.jpowsour.2008.01.020 ↗
61. A novel method for in-situ monitoring of local voltage, temperature and humidity distributions in fuel cells using flexible multi-functional micro sensors10.3390/s110201418 ↗
62. In-situ measurement of high-temperature proton exchange membrane fuel cell stack using flexible five-in-one micro-sensor10.3390/s16101731 ↗
63. Analyzing in-plane temperature distribution via a micro-temperature sensor in a unit polymer electrolyte membrane fuel cell10.1016/j.apenergy.2014.03.016 ↗
64. Thin film thermocouples for in situ membrane electrode assembly temperature measurements in a polybenzimidazole-based high temperature proton exchange membrane unit cell10.1016/j.jpowsour.2010.02.018 ↗
65. Thin film thermocouple fabrication and its application for real-time temperature measurement inside PEMFC10.1016/j.ijheatmasstransfer.2019.07.048 ↗
66. Fiber Bragg grating technology fundamentals and overview10.1109/50.618320 ↗
67. Fiber Bragg grating sensors: principles and applications
68. Carbon monoxide poisoning of proton exchange membrane fuel cells10.1002/er.713 ↗
69. Effect of CO in the anode fuel on the performance of PEM fuel cell cathode10.1016/S0378-7753(02)00300-2 ↗
70. Poisoning of proton exchange membrane fuel cell cathode by CO in the anode fuel10.1149/1.1414944 ↗
71. Effect of carbon dioxide and ammonia on polymer electrolyte membrane fuel cell stack performance10.1002/fuce.200330107 ↗
72. Effects of hydrogen sulfide on the performance of a PEMFC10.1149/1.1621831 ↗
73. The effect of temperature and pressure on the performance of a PEMFC exposed to transient CO concentrations10.1149/1.1522383 ↗
74. Knights · 2005
75. Assessing durability of cathodes exposed to common air impurities10.1016/j.jpowsour.2004.06.036 ↗
76. Adsorption and oxidation of sulphur and of sulphur dioxide at the platinum electrode10.1016/S0022-0728(71)80162-6 ↗
77. The nature of species adsorbed on platinum from SO2 solutions
78. Effect of ammonia as potential fuel impurity on proton exchange membrane fuel cell performance10.1149/1.1447221 ↗
79. Influence of ammonium on conductivity and water content of Nafion 117 membranes10.1149/1.1641035 ↗
80. Hydrogen generation from natural gas for the fuel cell systems of tomorrow10.1016/S0378-7753(96)02347-6 ↗
81. Future prospects for production of methanol and hydrogen from biomass10.1016/S0378-7753(02)00220-3 ↗
82. Sodium borohydride as the hydrogen supplier for proton exchange membrane fuel cell systems10.1016/j.fuproc.2006.05.001 ↗
83. Performance evaluation of PEM fuel cell stack on hydrogen produced in the oil refinery10.1016/j.ijhydene.2019.06.160 ↗
84. Influence of operating conditions on permeation of CO2 through the membrane in an automotive PEMFC system10.1016/j.ijhydene.2018.10.033 ↗
85. Influence of urban air on proton exchange membrane fuel cell vehicles–Long term effects of air contaminants in an authentic driving cycle10.1016/j.jpowsour.2018.08.063 ↗
86. The effects of battlefield contaminants on PEMFC performance10.1016/S0378-7753(99)00341-9 ↗
87. Assessment of the performance of a PEMFC in the presence of CO10.1016/j.jpowsour.2005.02.049 ↗
88. Modelling study of CO2 poisoning on PEMFC anodes10.1016/j.jpowsour.2004.05.004 ↗
89. Hydrogen sulfide poisoning and recovery of PEMFC Pt-anodes10.1016/j.jpowsour.2006.12.052 ↗
90. Electrochemical gas sensor with extremely fast response times10.1021/ac00071a017 ↗
91. Recent developments in electrochemical sensor application and technology—a review10.1088/0957-0233/20/4/042002 ↗
92. Electroconducting conjugated polymers: new sensitive matrices to build up chemical or electrochemical sensors10.1016/0925-4005(92)80029-W ↗
93. Low power CO2 NDIR sensing using a micro-bolometer detector and a micro-hotplate IR-source10.1016/j.snb.2013.03.048 ↗
94. A review on non-dispersive infrared gas sensors: improvement of sensor detection limit and interference correction10.1016/j.snb.2016.03.040 ↗
95. Lillesand · 2015
96. Detection limit improvement for NDIR ethylene gas detectors using passive approaches10.1016/j.snb.2012.09.085 ↗
97. On-chip non-dispersive infrared CO2 sensor based on an integrating cylinder10.3390/s19194260 ↗
98. A low cost MEMS based NDIR system for the monitoring of carbon dioxide in breath analysis at ppm levels10.1016/j.snb.2016.04.016 ↗
99. Solid state gas sensor research in Germany–a status report10.3390/s90604323 ↗
100. Solid state gas sensors10.1088/0957-0233/8/3/003 ↗