Residual fatigue life modeling of fuel cell membranes
Source abstract
Abstract
Abstract Fuel cell membranes operate in a dynamically varying humid environment that introduces detrimental mechanical stresses which may lead the membrane to fatigue failure. The damage caused by these stresses is investigated using a cumulative-damage model and the residual membrane fatigue life is determined. A time-temperature-humidity dependent constitutive model is first developed based on material data obtained from a range of tensile experiments conducted at different conditions. The constitutive model is then incorporated into a multi-physics fuel cell finite element model developed to characterize the material behavior and estimate the coupled hygro-thermo-mechanical stress field in the membrane during fuel cell operation. Using this modeling approach, and with the aid of experimentally obtained fatigue data, fail-safe regions are identified for a given load spectrum corresponding to accelerated stress test and simulated drive cycle conditions. For each load spectrum, the distribution of stress-reversals is calculated for the load history using rainflow counting algorithm. In addition to identifying the regions of membrane that are more susceptible to fatigue damage, it is found that high amplitude stress cycles with low occurrence percentage are more severe than high occurrence low-amplitude cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. 2017
2. Papageorgopoulos · 2019
3. New insights into perfluorinated sulfonic-acid lonomers10.1021/acs.chemrev.6b00159 ↗
4. Estimating the durability of polymer electrolyte fuel cell membranes using a fracture percolation model10.1149/2.0282001JES ↗
5. Membrane degradation during combined chemical and mechanical accelerated stress testing of polymer electrolyte fuel cells10.1016/j.jpowsour.2014.01.106 ↗
6. Scientific aspects of polymer electrolyte fuel cell durability and degradation10.1021/cr050182l ↗
7. A water sorption isotherm model for ionomer membranes with cluster morphologies10.1021/ma00145a030 ↗
8. Non-fickian water vapor sorption dynamics by nafion membranes10.1021/jp7103243 ↗
9. The kinetics of water sorption in Nafion membranes: a small-angle neutron scattering study10.1088/0953-8984/23/23/234107 ↗
10. On the constitutive relations for catalyst coated membrane applied to in-situ fuel cell modeling10.1016/j.jpowsour.2013.11.087 ↗
11. Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle10.1016/j.jpowsour.2006.05.020 ↗
12. Effect of time-dependent material properties on the mechanical behavior of PFSA membranes subjected to humidity cycling10.1016/j.jpowsour.2012.04.065 ↗
13. Numerical investigation of mechanical durability in polymer electrolyte membrane fuel cells10.1149/1.3328496 ↗
14. Constitutive modeling of the rate, temperature, and hydration dependent deformation response of Nafion to monotonic and cyclic loading10.1016/j.jpowsour.2010.03.047 ↗
15. Time-dependent mechanical response of a composite PFSA membrane10.1016/j.jpowsour.2012.11.116 ↗
16. Stress-strain behavior of perfluorosulfonic acid membranes at various temperatures and humidities: experiments and phenomenological modeling10.1115/1.2971069 ↗
17. Hygro-thermal mechanical behavior of Nafion during constrained swelling10.1016/j.jpowsour.2010.11.116 ↗
18. Fatigue properties of catalyst coated membranes for fuel cells: ex-situ measurements supported by numerical simulations10.1016/j.ijhydene.2016.04.042 ↗
19. Simulation of ionomer membrane fatigue under mechanical and hygrothermal loading conditions10.1016/j.jpowsour.2014.12.133 ↗
20. Ex-situ tensile fatigue-creep testing: a powerful tool to simulate in-situ mechanical degradation in fuel cells10.1016/j.jpowsour.2016.02.053 ↗
21. A theory for fatigue failure under multiaxial stress-strain conditions10.1243/PIME_PROC_1973_187_161_02 ↗
22. A critical plane approach to multiaxial fatigue damage including out-of-phase loading10.1111/j.1460-2695.1988.tb01169.x ↗
23. In-situ simulation of membrane fatigue in polymer electrolyte fuel cells10.1016/j.ijhydene.2017.01.173 ↗
24. Chapter 2 - membrane durability: physical and chemical degradation
25. Standard Practices for Cycle Counting in Fatigue Analysis
26. Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials10.1016/S0142-1123(97)00081-9 ↗
27. Mechanical degradation of fuel cell membranes under fatigue fracture tests10.1016/j.jpowsour.2014.10.135 ↗
28. Mechanical properties of catalyst coated membranes for fuel cells10.1016/j.jpowsour.2013.01.128 ↗
29. Creep and yield behaviour of semi-crystalline polyethylene in uniaxial tension
30. Effect of gas diffusion layer modulus and land-groove geometry on membrane stresses in proton exchange membrane fuel cells10.1016/j.jpowsour.2011.01.028 ↗
31. Effect of hygral swelling and shrinkage on mechanical durability of fuel cell membranes10.1016/j.jpowsour.2019.04.081 ↗
32. Effect of water transport on swelling and stresses in PFSA membranes10.1002/fuce.201400058 ↗
33. Tracking the evolution of mechanical degradation in fuel cell membranes using 4D in situ visualization10.1016/j.jpowsour.2018.11.049 ↗
34. 3D visualization of membrane failures in fuel cells10.1016/j.jpowsour.2017.01.129 ↗
35. 3D failure analysis of pure mechanical and pure chemical degradation in fuel cell membranes10.1149/2.0451713jes ↗
36. Characterization of membrane degradation growth in fuel cells using X-ray computed tomography10.1149/2.0251806jes ↗
37. Isolated chemical degradation induced decay of mechanical membrane properties in fuel cells10.1016/j.electacta.2020.136489 ↗
38. Viscoelastic stress analysis of constrained proton exchange membranes under humidity cycling10.1115/1.2971045 ↗
39. Combined operando high resolution SANS and neutron imaging reveals in-situ local water distribution in an operating fuel cell10.1021/acsaem.9b01266 ↗
40. Practical implementation of the double linear damage rule and damage curve approach for treating cumulative fatigue damage10.1007/BF00053519 ↗
41. Ellyin · 2012
42. A new nonlinear fatigue damage model based only on S-N curve parameters10.1016/j.ijfatigue.2017.06.017 ↗