Controlling reformation rate for a more uniform temperature distribution in an internal methane steam reforming solid oxide fuel cell
Source abstract
Abstract
Abstract Internal methane reformation capability makes the SOFC technology favorable for integration with the existing infrastructure. Methane steam reformation (MSR) reaction happening at the entrance of the fuel channel is endothermic while exothermic fuel cell reactions dominate the remaining of the cell. Consequently cold spots occur near the inlet while hot spots occur farther down the electrode resulting in steep temperature gradients. To alleviate this problem, it is suggested that MSR reaction can be slowed down to extend methane conversion to a broader fuel cell region. Rejecting the heat released during the fuel cell reaction with MSR, temperature gradients can be flattened for a more uniform distribution. In this study a three dimensional computational fluid dynamics model is developed to investigate the potentials of controlling the MSR rate for improved thermal characteristics of an SOFC. Modification of the catalytic activity by changing anode material and microstructure is considered as the means of controlling reaction rate. Also the effect of fuel stoichiometry and interconnect material on the thermal gradients are analyzed. It is suggested that the anode material can be engineered to have a more balanced temperature distribution and relaxed thermal stresses during methane fueled SOFC operation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion · Chemical Looping and Thermochemical Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Tokyo gas update ene-farm product”
2. Effects of anode material and fuel on anodic reaction of solid oxide fuel cells10.1149/1.2068998 ↗
3. “Mathematical modeling of Ni/GDC and Au–Ni/GDC SOFC anodes performance under internal methane steam reforming conditions”10.1016/j.jcat.2013.06.015 ↗
4. “Experimental study of internal reforming on large‐area anode supported solid oxide fuel cells”10.1002/fuce.201400070 ↗
5. Controlling activity and stability of Ni-YSZ catalysts for on-anode refomiing
6. Low cost high entropy alloy anode for distributed reforming and prevention of carbon deposition in SOFC
7. Designing graded catalytic domain to homogenize temperature distribution while dry reforming of CH410.1016/j.ijhydene.2018.07.084 ↗
8. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
9. Catalytic modification of conventional SOFC anodes with a view to reducing their activity for direct internal reforming of natural gas10.1016/j.jpowsour.2004.11.075 ↗
10. Carbon deposition and methane steam reforming on silica-supported Ni-Cu catalysts10.1016/0021-9517(85)90320-3 ↗
11. Alternative anode material for gradual methane reforming in solid oxide fuel cells10.1016/S0167-2738(00)00390-8 ↗
12. Review on modeling development for multiscale chemical reactions coupled transport phenomena in solid oxide fuel cells10.1016/j.apenergy.2009.11.013 ↗
13. Macroscopic modeling of solid oxide fuel cell (SOFC) and model-based control of SOFC and gas turbine hybrid system10.1016/j.pecs.2017.12.002 ↗
14. Internal steam reforming in solid oxide fuel cells: status and opportunities of kinetic studies and their impact on modelling10.1016/j.jpowsour.2010.06.091 ↗
15. Three-dimensional and time-dependent simulation of a planar solid oxide fuel cell stack10.1016/0378-7753(93)01833-4 ↗
16. Methane/steam reforming kinetics for solid oxide fuel cells10.1016/0378-7753(94)02146-5 ↗
17. Modeling of mass and heat transport in planar substrate type SOFCs10.1149/1.1574029 ↗
18. Three-dimensional simulation of chemically reacting gas flows in the porous support structure of an integrated-planar solid oxide fuel cell10.1016/j.ijheatmasstransfer.2004.04.010 ↗
19. Three-dimensional thermo-fluid electrochemical modeling of planar SOFC stacks
20. Analysis of a planar solid oxide fuel cell based automotive auxiliary power unit
21. Multiscale electrochemistry modeling of solid oxide fuel cells10.1615/IntJMultCompEng.v3.i1.30 ↗
22. “Modeling of electrochemistry and steam–methane reforming performance for simulating pressurized solid oxide fuel cell stacks”10.1016/j.jpowsour.2010.04.024 ↗
23. 3D modeling of anode-supported planar SOFC with internal reforming of methane10.1016/j.jpowsour.2007.07.003 ↗
24. Numerical study of thermoelectric characteristics of a planar solid oxide fuel cell with direct internal reforming of methane10.1016/j.jpowsour.2008.10.034 ↗
25. CFD model of a methane fuelled single cell SOFC stack for analysing the combined effects of macro/micro structural parameters10.1016/j.jpowsour.2012.12.123 ↗
26. Three dimensional modeling of an solid oxide fuel cell coupling charge transfer phenomena with transport processes and heat generation10.1016/j.electacta.2013.08.018 ↗
27. Comparison of humidified hydrogen and partly pre-reformed natural gas as fuel for solid oxide fuel cells applying computational fluid dynamics10.1016/j.ijheatmasstransfer.2014.06.033 ↗
28. Three-dimensional modeling of internal reforming SOFC with a focus on the interconnect size effect10.1149/06801.2317ecst ↗
29. Solid oxide fuel cell interconnect design optimization considering the thermal stresses10.1007/s11434-016-1146-3 ↗
30. Modeling of an anode supported solid oxide fuel cell focusing on thermal stresses10.1016/j.ijhydene.2016.06.171 ↗
31. Leinfelder · 2004
32. SOFC research in international cooperation: the IEA SOFC annex
33. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance10.1016/j.jpowsour.2004.06.040 ↗
34. On the effect of methane internal reforming modelling in solid oxide fuel cells10.1016/j.ijhydene.2008.01.024 ↗
35. Multicomponent diffusion10.1021/ie9901123 ↗
36. A new method for prediction of binary gas-phase diffusion coefficients
37. Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling10.1016/S0378-7753(02)00277-X ↗
38. Compilation and evaluation of gas phase diffusion coefficients of reactive trace gases in the atmosphere: volume 1. Inorganic compounds10.5194/acp-14-9233-2014 ↗
39. Mason · 1983
40. Taylor · 1993
41. On the effect of methane internal reforming modeling in solid oxide fuel cells10.1016/j.ijhydene.2008.01.024 ↗
42. Modeling of a SOFC fuelled by methane: from direct internal reforming of gradual internal reforming10.1016/j.ces.2006.11.034 ↗
43. Internal steam reforming in solid oxide fuel cells: status and opportunities of kinetic studies and their impact on modelling10.1016/j.jpowsour.2010.06.091 ↗
44. SOFC modeling considering electrochemical reactions at the active three phase boundaries10.1016/j.ijheatmasstransfer.2011.10.032 ↗
45. Three-dimensional simulation of chemically reacting gas flows in the porous support structure of an integrated-planar solid oxide fuel cell10.1016/j.ijheatmasstransfer.2004.04.010 ↗
46. Modelling of gas transport phenomena in SOFC anodes10.1016/S0378-7753(99)00356-0 ↗
47. Structural properties of SOFC anodes and reactivity10.1016/S0013-4686(98)00046-2 ↗
48. 1989
49. Mathematical modeling of solid oxide fuel cells: a review10.1016/j.rser.2010.12.011 ↗
50. Three dimensional numerical simulation for various geometries of solid oxide fuel cells10.1016/0378-7753(95)02269-4 ↗
51. Modeling and parametric simulations of solid oxide fuel cells with methane carbon dioxide reforming10.1016/j.enconman.2013.02.008 ↗
52. Horoz · 2018
53. Evaluation of system configurations for solid oxide fuel cell-based micro-combined heat and power generators in residential applications10.1016/j.jpowsour.2005.10.064 ↗
54. Electrochemical and thermodynamic modeling of a CHP system using tubular solid oxide fuel cell (SOFC-CHP)
55. High efficiency thermoelectric cooperative control of a stand-alone solid oxide fuel cell system with an air bypass valve10.1016/j.energy.2018.02.100 ↗
56. 1D thermodynamic modeling for a solid oxide fuel cell stack and parametric study for its optimal operating conditions10.1016/j.enconman.2020.112614 ↗
57. Concentration gradient of reactants extending from reaction sites inward inlet periphery of fuel cells10.1149/2.0871805jes ↗
58. Mass transport limitation in inlet periphery of fuel cells: studied on a planar solid oxide fuel cell10.1016/j.ijhydene.2018.07.030 ↗
59. De Marco · 2010