Aluminum phosphate as a bifunctional additive for improved cycling stability of Li-S batteries
Source abstract
Abstract
Abstract We demonstrate a facile way to alleviate lithium polysulfide shuttle effect by using aluminum phosphate (AlPO4) as a bifunctional additive in lithium-sulfur (Li-S) batteries. AlPO4 microparticles are synthesized via sol-gel and subsequent calcination process. The effects of AlPO4 on adsorption of lithium polysulfide as well as the performance of Li-S cell are investigated. The Li-S cell containing AlPO4 1.0 wt% retains 76% of the initial capacity after 100 cycles at 0.2 C and it retains 453 mAh∙g−1 at 1.0 C. Using ex-situ X-ray photoelectron spectroscopy and infra-red analysis, it is found that lithium polysulide is chemically adsorbed on AlPO4 through Lewis acid-base interaction with the P O groups in (PO4)3-. The improvement in cycling stability is attributed to the strong interaction between AlPO4 and lithium polysulfides. The adsorbed lithium polysulfides are converted to thiosulfates/polythionates, preventing the dissolution of the lithium polysulfides into the electrolyte and migration to the anode. Various electrochemical measurements including electrochemical impedance spectroscopy and cyclic voltammetry demonstrate that AlPO4 lowers the interfacial resistance and helps fast reversible conversion reaction of sulfur to lithium polysulfides, which enables fast charge/discharge. These results suggest that use of AlPO4 is a convenient and effective way to improve the performance of Li-S batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Insight into sulfur reactions in Li − S batteries10.1021/am504763p ↗
2. Lithium-sulfur batteries: progress and prospects10.1002/adma.201405115 ↗
3. High capacity cathode materials for Li–S batteries10.1039/C2TA00056C ↗
4. Polysulfides capture-copper additive for long cycle life lithium sulfur batteries10.1021/acsami.6b10366 ↗
5. Inhibiting polysulfide diffusion of lithium-sulfur batteries using an aceylene black-CoS2 modified separator: mechanism research and performance improvement10.1016/j.apsusc.2017.08.062 ↗
6. ZrO(NO3)2 as a functional additive to suppress the diffusion of polysulfides in lithium-sulfur batteries10.1016/j.jpowsour.2019.227232 ↗
7. Catalytic oxidation of Li2S on the surface of metal sulfides for Li-S batteries10.1073/pnas.1615837114 ↗
8. Single-atom coated separator for robust lithium-sulfur batteries10.1021/acsami.9b05628 ↗
9. Disordered mesoporous carbon as polysulfide reservoir for improved cyclic performance of lithium-sulfur batteries10.1016/j.carbon.2013.11.001 ↗
10. Natural integrated carbon architecture for rechargeable lithium-sulfur batteries10.1021/acssuschemeng.5b01258 ↗
11. Separator modified by Ketjen black for enhanced electrochemical performance of lithium-sulfur batteries10.1039/C5RA26476F ↗
12. Highly reversible lithium/dissolved polysulfide batteries with carbon nanotube electrodes10.1002/anie.201301250 ↗
13. Inhibiting polysulfide shuttling with a graphene composite separator for highly robust lithium-sulfur batteries10.1016/j.joule.2018.07.022 ↗
14. A highly efficient polysulfide mediator for lithium-sulfur batteries10.1038/ncomms6682 ↗
15. Improvement of cycling performance of lithium–sulfur batteries by using magnesium oxide as a functional additive for trapping lithium polysulfide10.1021/acsami.5b11327 ↗
16. Pyrite FeS2 as an efficient adsorbent of lithium polysulphide for improved lithium-sulphur batteries10.1039/C6TA01214K ↗
17. Promoting lithium polysulfide/sulfide redox kinetics by the catalyzing ofzinc sulfide for high performance lithium-sulfur battery10.1016/j.nanoen.2018.06.046 ↗
18. Conductive and polar titanium boride as a sulfur host for advanced lithium-sulfur batteries10.1021/acs.chemmater.8b01352 ↗
19. Black BaTiO3 as multifunctional sulfur immobilizer for superior lithium sulfur batteries
20. Enhanced sulfur transformation by multifunctional FeS2/FeS/S composites for high‐volumetric capacity cathodes in lithium–sulfur batteries10.1002/advs.201800815 ↗
21. Tailoring surface acidity of metal oxide for better polysulfide entrapment in Li-S batteries10.1002/adfm.201602264 ↗
22. Efficient and selective conversion of lactic acid into acetaldehyde using a mesoporous aluminum phosphate catalyst10.1039/C4GC01779J ↗
23. Evaluating oxidation behavior of amorphous aluminum phosphate coating10.1016/j.apsusc.2018.06.087 ↗
24. Full-cell cycling of a self-supporting aluminum foil anode with a phosphate conversion coating10.1021/acsami.9b02813 ↗
25. A breakthrough in the safety of lithium secondary batteries by coating the cathode material with AlPO4 nanoparticles10.1002/anie.200250452 ↗
26. Microstructure of LiCoO2 with and without “AlPO4” nanoparticle coating: combined STEM and XPS studies10.1021/cm0715390 ↗
27. High thermal stability and low impedance polypropylene separator coated with aluminum phosphate10.1016/j.electacta.2019.07.039 ↗
28. Developing porous carbon with dihydrogen phosphate groups as sulfur host for high performance lithium sulfur batteries10.1016/j.jpowsour.2017.12.027 ↗
29. An aqueous inorganic polymer binder for high performance lithium-sulfur batteries with flame-retardant properties10.1021/acscentsci.7b00569 ↗
30. Control of aluminum phosphate coating on mullite fibers by surface modification with polyethylenimine10.1016/j.ceramint.2017.09.161 ↗
31. Boosting high-rate Li-S batteries by an MOF-derived catalytic electrode with a layer-by-layer structure
32. Polysulfide-containing glyme-based electrolytes for lithium sulfur battery10.1021/acs.chemmater.5b00896 ↗
33. Synthesis of AlPO4 and kinetics of thermal decomposition of AlPO4∙H2O-H4 precursor10.1007/s10973-007-8420-1 ↗
34. Nitrogen-doped porous carbon nanofiber webs/sulfur composites as cathode materials for lithium-sulfur batteries10.1016/j.electacta.2013.11.041 ↗
35. Advanced engineering of nanostructured carbons for lithium-sulfur batteries10.1016/j.nanoen.2015.05.006 ↗
36. Spherical ordered mesoporous carbon nanoparticles with high porosity for lithium-sulfur batteries10.1002/anie.201107817 ↗